TransTel Medical Nurse Call System TransTel Communications

System Configuration INTERCOM MODULE & Bedside Call Cord PATIENT ROOM NURSE STATION PATIENT ROOM Corridor Light CORRIDOR INTERSECTION LED Display Panel Control Module INTERCOM MODULE & Bedside Call Cord Bedside Call Emergency Call Staff Inspection Staff Assist Bed Exit/Wet Detector Bathroom Pull-cord BlueBox

Applications of Nurse Call Device & Panels – NCD2 & NCP

Application I – Bedside Call (Call Cord/Button) Nurse Station Patient Room 205 Bathroom Patient call status showing on LED display panel Nurse answers Patient pushes Call-Cord or presses CALL button Hello, nurse, can you come here? I feel faint. Nurse comes to check and press CANCEL

Application II – Emergency Call Nurse Station Patient Room 205 Bathroom Nurse answers Patient presses EMERGENCY button HELP! I can’t breathe. Nurse comes to check and press CANCEL

Application III – Bathroom Call Nurse Station Patient Room 205 Bathroom Nurse answers Patient calls or pulls the ring-pull Nurse comes to check and press CANCEL

Application IV – Doctor/Nurse Inspection Nurse Station Patient Room 205 Bathroom DSS key flashing green Doctor presses the key during the ward inspection Or nurses do daily ward inspection Press CANCEL when ward inspection finished

Application V – Bed Exit/Wet Sensor Nurse Station Patient Room 205 Bathroom Nurse answers Bed Exit or Wet Detected Nurse comes to check and press CANCEL

Application VI – Call Cord Disconnection Alarm Nurse Station Patient Room 205 Bathroom Nurse answers Call cord disconnected Nurse comes to check, plug in call cord, and press CANCEL

Application VII – Staff Assist Nurse Station Patient Room 205 Bathroom Nurse station answers Alert other members of staff that assistance is required Staff comes to assist and press CANCEL

Applications of Nurse Call Software – BlueBox

Application VIII – Comprehensive Reporting Provides Comprehensive Reporting For risk and cost reduction For effective and efficient resource management

TransTel Nurse Call Alarm Message To DECT Handsets Main Controller 4 Speech channels Teleco / TSIP TDS ISU4, ISU8 ISU4/24, ISU8/24 VoIP SIP Via LAN Nurse Call Alarm handling Messages Alert are displayed on the DECT Phone Handsets as well as call indications allowing full information to be given and easy control of communications between staff and patient, as well as between staff and staff. System Phones, SLT Phones

Nurse Station The Nurse Station / Stations can monitor the status of their patients in the ward with real time alarms and status. Patients can be informed immediately that their call for assistance has been acknowledged and a nurse is on the way. It even allows for the patients concern to be resolved immediately over the Nurse Call System without sending a staff member to the patient. TransTel Nurse Call with IP Camera (Optional in Future Release)

Nurse Station – cont’d Move the cursor to NCD icon of the ward you want to monitor, and click mouse to choose IP Camera to monitor the patient room.

Nurse Station – cont’d Send messages to staff’s DECT phones via BlueBox

Hospital Lock Down / Evacuation In Situations of Hospital Lock Down or Emergency Evacuation, TransTel system can be set to Call “ALL” Phones and Notify them or Play an Emergency message through the System . External Call Notification Evacuation Button DSS Lights will indicate extensions ringing/guests on phones Operator Phone rings ‘Floor Fire Alarm’ 777 to cancel Alarm This is an Emergency Evacuation Call. Please make your way to the emergency exits. The TDS EMERGENCY EVACUATION can be activated manually via an external press button switch or integrated into a Fire Alarm panel using a relay contact. On activation all Phones in the EMERGENCY EVACUATION group will ring in short ring bursts, on answer the staff or patients will hear the EMERGENCY EVACUATION message (recordable)

Hospital Lock Down / Evacuation In Situations of Hospital Lock Down or Emergency Evacuation, TransTel can be set to Call “ALL” Phones and Notify them or Play an Emergency message through the Speakers of System Phones or Be-Paged SLT Phones. External Call Notification Evacuation Button DSS Lights will indicate extensions ringing/guests on phones Operator Phone rings ‘Floor Fire Alarm’ 777 to cancel Alarm Call “ALL” Phones and Notify them or Play an Emergency message through the system. This is an Emergency Evacuation Call. Please make your way to the emergency exits. Speaker Handset The TDS EMERGENCY EVACUATION can be activated manually via an external press button switch or integrated into a Fire Alarm panel using a relay contact. On activation all Phones in the EMERGENCY EVACUATION group will ring in short ring bursts, on answer the staff or patients will hear the EMERGENCY EVACUATION message (recordable)

Thank you !