Kristy Foster – L2 Software Engineer October 16, 2014 IBM Sterling Gentran:Viewpoint for iSeries Automatic Notification option

Automatic Notification provides a method to notify users based on the importance of Gentran job return codes. The Automatic Notification function allows you to: Create notification entries based upon process name, command name, and a return code from the Message Center. These entries will be referred to as notification profiles. Create/modify/delete e-mail entries for specific notification profiles. Create/modify/delete paging entries for specific notification profiles. Create/modify/delete User Exit commands for specific notification profiles. Copy Automatic Notification entries. Print Automatic Notification entries. NOTE: Viewpoint must be enabled to access the Automatic Notification panels. Message Center must be activated to track jobs for return codes.

How to enable Viewpoint? Viewpoint is enabled by a Global Parameter setting. From the Genmain menu use option 11, for the System Administration Menu; then option 1 to set global parameters. Use the F8 key to move to the last screen (EDIX415-FMT04).

How to activate the Message Center? Message Center is activated by a flag in the Message Center Configuration. From the Genmain menu use option 9, for the Message Center Menu; then option 3, set the flag to Y to activate Message Center and the Functions to track. (EDIX610-FMT01).

Summary Both Gentran:Server Viewpoint and the Message Center must be enabled and activated for the Automatic Notifications to work. Upon the completion of a job that is being tracked in the Message Center, the Automatic Notification profiles in Viewpoint are searched for a matching process name, command name, and the return code. Only one notification profile will be selected. Notifications are generated by e-mail, page, by performing a user exit program, or any combination of the three methods. NOTE: To use the e-mail automatic notification, you will need to configure your iSeries to allow Internet addressing for the SNDDST command. To determine if you are already set-up for Internet addressing, type the following command: DSPDIRE USRID(Internet Gateway) and press Enter. Internet addressing is already configured, if the Display Directory Entry Details panel displays.

How to configure your iSeries to allow Internet addressing for the SNDDST command. Note: You must have *SECADM authority to perform these steps. Run these 3 separate commands as they are listed to allow for Internet addressing: ADDDIRE USRID(INTERNET GATEWAY) USRD(‘Allow OfficeVision to send INTERNET Mail’) SYSNAME(INTERNET) MSFSRVLVL(*USRIDX) PREFADR(NETUSRID *IBM ATCONTXT) and press Enter. CHGDSTA SMTPRTE(INTERNET GATEWAY) and press Enter. ADDDIRE USRID(TESTUSER TESTBOX) USRD(‘TestuserDescription’) USER(TESTUSER) (where ‘TESTUSER’ is the user profile on the iSeries and ‘TESTBOX’ is the system name where the job will run) and press Enter. Please refer to the Sterling Gentran Viewpoint for iSeries Guide for complete setup details for all of the notification methods.

Additional References Learn about upcoming Support Technical Exchange webcasts, and access previously recorded presentations at: https://www-304.ibm.com/connections/communities/service/html/communityview?communityUuid=d58614c7-a87a-4bea-a0d3-572710d530db IBM Electronic Support Introduction http://www.ibm.com/support/electronicsupport/about.html Sign up to receive weekly technical My Notifications emails: http://www.ibm.com/software/support/einfo.html developerWorks Forums, Communities and Technical Topics http://www.ibm.com/developerworks/ Quick Reference Guide for Using Service Request Tool http://www.ibm.com/support/docview.wss?uid=swg21207945 IBM Support Assistant http://www.ibm.com/software/support/isa/ Access product show-me demos and tutorials by visiting IBM Education Assistant: http://www.ibm.com/software/info/education/assistant

THE INFORMATION CONTAINED IN THIS PRESENTATION IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. WHILE EFFORTS WERE MADE TO VERIFY THE COMPLETENESS AND ACCURACY OF THE INFORMATION CONTAINED IN THIS PRESENTATION, IT IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. IN ADDITION, THIS INFORMATION IS BASED ON IBM’S CURRENT plans and strategy, which are subject to CHANGE by IBM without notice. Ibm shall not be rESPONSIBLE for any damages arising out of the use of, or otherwise related to, this presEntation or any other DOCUMENTATION, nothing conTAIned in this presentation is intended to nor shall haVE THE effect of creating any warranties OR representations from ibm (or its supplieRS oR licensors), or altering the terms and conditions of any AgreemeNt or license governing the use of ibm product or software. Copyright and Trademark Information IBM, The IBM Logo and IBM.COM are trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks and others are available on the web under “Copyright and Trademark Information” located at www.ibm.com/legal/copytrade.shtml.