AA/S 4.1 Analogue Actuator AAM/S 4.1 Analogue Actuator Module

Slides:



Advertisements
Similar presentations
SITOP select Automation and Drives SITOP select Electronic Diagnosis Module Fault diagnosis – rapid and reliable.
Advertisements

What is Arduino?  Arduino is a ATMEL 168 micro-controller kit designed specially for small projects  User friendly IDE(Integrated Development Environment)
PDS secondo le IEC n.
Copyright © 2014 Delmar, Cengage Learning APAD/ACPU A/C Control Systems Instructor Name: (Your Name) 11 CHAPTER.
IC Voltage Regulator.
Viking Pump Flow Manager - Phase 2 Senior Design May
POWER PLANT USED IN TELECOM
1 Applied Control Systems Technology. 2 Pin configuration Applied Control Systems.
Technical Training. 1 Configuration: 2558 Analog Input Module 1. Select voltage or current input mode for each channel 3. Select digital filtering, offset.
1 Verizon Technology California Public Utilities Commission Rulemaking Backup Power at the Customer Premises Technical Workshop June 5th, 2007.
EMT212 – Analog Electronic II
0-10V Ballast Dimmer HDL-MRDA HDL-MRDA channel 10A DC0 - 10V output module is a multifunction control module. It has 6 channel relay.
MRDA Wiring diagram S-BUS Module ID setting button ballast L N DC0-10V dimming voltage Control DC Maximum current :100mA 6 relay switch 16A 6 channel.
18240 Element two - Components INPUTS OUTPUTS PURPOSE TYPICAL USE.
Start of Sales MSI-XXXB Safety Relays Plugable screw or spring-cage terminal blocks.
Lesson 1 PLC BASICS. PLC Definition  Programmable Logic Controllers are industrial computers that control machine and other applications.  PLC have.
Application Case Study Christmas Lights Controller
ABB i-bus® EIB Shutter Actuators
Product Overview Analogue Input, 2fold, SM  Box  Sensor connections
ABB i-bus® KNX Fan Coil Actuator FCA/S
Fan Coil Actuator FCA/S 1.x.x.2
Fan Coil Controller FC/S 1.1
G. Schlag / STO-GM / Novembre 2012
DALI-Gateway DG/S 1.1.
ABB STOTZ-KONTAKT GmbH DALI-Gateway DG/S
STO/GM December 2011 ABB STOTZ-KONTAKT GmbH ABB i-bus® KNX DGN/S DALI Gateway for emergency lighting © STO/G - Slide 1.
Room Controller RC/A 8.1 Room Controller economic flexible modular.
automatic recognition of load-type superior functionality
DALI-Gateway DG/S 8.1.
ABB i-bus® KNX Light Controller LR/S x.16.1 with LF/U 2.1.
ABB i-bus® EIB / KNX Analogue Input AE/S 4.2
System Network Structure
ABB i-bus® KNX Weather Station
ABB i-bus® KNX Valve Drive Actuator VAA/A
August 2012 ABB STOTZ-KONTAKT GmbH ABB i-bus® KNX Energy Module EM/S Energy Actuator SE/S © ABB 20 May 2018 | Slide 1.
Dimmer 6fold 10V Actuator M/DA
ABB i-bus® KNX Fan Coil-Actuator FCA/S 1.1M
Blower-/Fan Coil-Actuator
Universal Interface, 4-fold, FM, US/U 4.2
ABB i-bus® EIB Display and Control Tableau
ABB i-bus® EIB Electronic Switch Actuator, 4-fold
What is meant by ‘Preventive Monitoring’?
ABB i-bus® EIB / KNX Weather Station WS/S 4.1
Redundancy Switching Components
Visit for more Learning Resources
ABB i-bus® EIB / KNX Elektromotor Valve Drive ST/K 1.1
بسم الله الرحمن الرحيم اساس عمل الترانزستور اعداد: م/ أحمد المصرى.
ABB i-bus® EIB / KNX Binary Input BE/S x.x.1
ABB i-bus® EIB / KNX Fault Monitoring Unit SMB/S 1.1
ABB i-bus® EIB / KNX USB Interface
Multi Channel Interface & Basic Amplifier
4 channels, each as input or output
2 channels, each as input or output
EIB Power Supply, 160 mA SV/S
Commissioning Power Supply NTI/Z
Multi Channel Interface & Basic Amplifier
Universal Interface, 12-fold, FM US/U 12.2
Universal I/O Concentrator UK/S 32.2
ABB i-bus® KNX Analogue Input
ABB STOTZ-KONTAKT GmbH DALI-Light Controller DLR/S M
Universal Dim Actuator UD/S
AM-7027 Up Converter-Amplifier
ACOE347 – Data Acquisition and Automation Systems
CECOM LAR Tropo Operation Course
ABB i-bus® EIB / KNX Application Unit Time ABZ/S 2.1
ABB i-bus® EIB / KNX Data Logging Unit BDB/S 1.1
What IS Relay?.
Detailed information FOR INTERNAL USE ONLY! CUBE20.
Presentation transcript:

AA/S 4.1 Analogue Actuator AAM/S 4.1 Analogue Actuator Module ABB i-bus® EIB/KNX AA/S 4.1 Analogue Actuator AAM/S 4.1 Analogue Actuator Module

AA/S 4.1 and AAM/S 4.1 Application Function Control of components of HVAC (e.g. drives for ventilation flaps) Usage as an active control unit for dimming applications (1 Bit, 4 Bit, only with 8 Bit input signal) Function Transformation of received values (8 Bit or 16 Bit) via EIB/KNX in analogue output signals Voltage signals: 0…1 V DC 0…10 V DC Current signals: 0…20 mA 4…20 mA

Analogue Actuator AA/S 4.1 Hardware AA/S 4.1 Analogue actuator 4fold, MDRC Successor of AA/S 2.1 4 adjustable analogue outputs Indication elements 1x Status-LED: Voltage, Commissioning, Module scan, Under voltage at module, Short circuit 4x channel-LED: (On = output signal > 0) 24 V AC auxiliary supply necessary Width: 4 MW

Analogue Actuator AA/S 4.1 Connection diagram

Analogue Actuator Module AAM/S 4.1 Hardware AAM/S 4.1 Analogue actuator module 4fold, MDRC 4 adjustable analogue outputs Connection to AA/S via system connector Indication elements 1x Status-LED: Voltage, Initialisation, no commissioning 4x channel-LED: (On = output signal > 0) 24 V AC auxiliary supply necessary Parametrisation via AA/S 4.1 Width: 4 MW

Analogue Actuator Module AAM/S 4.1 Connection diagram

AA/S 4.1 and AAM/S 4.1 Connection 6-pole system connector

AA/S 4.1 and AAM/S 4.1 Software Parametrisable input for 0 % and 100% output value (only with 16 Bit input value) Switch and dimming functions (only with 8 Bit input value) Adjustable output value after initialisation in % Behaviour parametrisable in case of bus voltage failure and recovery Scanning of the input objects after initial start

AA/S 4.1 and AAM/S 4.1 Software 2 objects for forced operation Cyclical monitoring of input value or forced operation Adjustable output value in % in case of exceeding the monitoring time Status object of the actual output value Alarm function in the event of overload at the output or at the end of the monitoring time

Analogue actuator AA/S 4.1 Technical data

Analogue actuator module AAM/S 4.1 Technical data