Kevin Boyce Director of Product Management, LED Drivers PA and PWA LED Drivers Kevin Boyce Director of Product Management, LED Drivers

PA and PWA Drivers PA PWA Programmable Features Programmable Auxiliary Output Programmable Wireless Programming Auxiliary Output Programmable Features Output Current – programmable down to 30% of rated current Dimming Level – programmable down to 1% on PWA and 5% on PA Dimming Curve – programmable to Linear, Linear Soft Start or Logarithmic Dimming Control Voltage – Dim-to-off, minimum dimming and maximum dim control voltages Programming Solution LDPC000A Configuration Tool EVERset Programming Software PA and PWA Drivers

Dimming Curve Linear Linear Soft Start Logarithmic - 2 Most Common dimming curve Works well with dimmers with a logarithmic response Linear dimming curve with a softer start Helps to minimize the “jump” in light output that can be seen when a dimmer is adjusted up from the minimum level Typically associated with DALI Works well with dimmers with a linear response The logarithmic base can set from 0 to 7, with larger numbers providing for a steeper curve Puts more response at the low end where light level changes are more noticeable

Dimming Curve – Control Voltage Break Points Full Bright Control Voltage Can be set from 7 to 9Vdc Minimum Dim Control Voltage Can be set from 1 to 3Vdc Dim-to-off Control Voltage Can be set from 0.1 to 1.7Vdc Must be set at least 0.2V below minimum dim control voltage Prevents the driver from cycling between dim-to-off and minimum dim voltage when there are small fluctuations in the dimming signal

Dimming Profiles Example – New Luminaire Profile Output Current 1050mA Min Dim Current 10.5mA Dimming Curve Logarithmic - 1 Max Bright Control Voltage 9Vdc Min Dim Control Voltage 0.5Vdc Dim-to-off Control Voltage 0.1Vdc Example – Replacement Luminaire Profile Output Current 1050mA Min Dim Current 10.5mA Dimming Curve Linear Max Bright Control Voltage 8Vdc Min Dim Control Voltage 1Vdc Dim-to-off Control Voltage disabled Adjustment of the dimming curve break points and dim-to-off allow for a customized dimming profile to be configured for a luminaire.

Auxiliary Output Power 1.2W Auxiliary Output 12Vdc 100mA or 24Vdc 50mA 30W PWA OTi30/120-277/1A0 DIM-1 L AUX No Offering 55W PWA OTi50/120-277/1A4 DIM-1 L AUX 80W PWA OTi 85/120‐277/2A3 DIM‐1 L AUX 55W PA 95W PA F-Can 95W PA VF-Can PWA Series PA Series Auxiliary output power is a key selling feature!

Universal PWA Drivers

30W PWA Driver 1050mA Programmable LED Driver Driver Operating Range: Universal (120-277V) Input Voltage Class 2, 30W Constant Current Output RFID Programming 0-10V Dimming to 1% Dim-to-Off Class 1 or Class 2 Control Circuit 12V or 24V 1.2W Auxiliary Output Options ~2-3W Driver Standby Power UL Listed / Class P C-Can Programmable Dimming Features Driver Operating Range: KSP KSP Voltage KSP Current (mA)

55W PWA Driver 1500mA Programmable LED Driver Driver Operating Range: Universal (120-277V) Input Voltage Class 2, 55W Constant Current Output RFID Programming 0-10V Dimming to 1% Dim-to-Off Class 1 or Class 2 Control Circuit 12V or 24V 1.2W Auxiliary Output Options ~2-3W Driver Standby Power UL Listed / Class P C-Can Programmable Dimming Features Driver Operating Range: KSP KSP Voltage KSP Current (mA)

80W PWA Driver 2100mA Programmable LED Driver Driver Operating Range: Universal (120-277V) Input Voltage Class 2, 80W Constant Current Output RFID Programming 0-10V Dimming to 1% Dim-to-Off Class 1 or Class 2 Control Circuit 12V or 24V 1.2W Auxiliary Output Options ~2-3W Driver Standby Power UL Listed / Class P D-Can Programmable Dimming Features Driver Operating Range: KSP KSP Voltage KSP Current (mA)

Universal PA Drivers

55W PA Driver 1500mA Programmable LED Driver Driver Operating Range: Universal (120-277V) Input Voltage Class 2, 55W Constant Current Output 0-10V Dimming to 5% Dim-to-Off Class 1 or Class 2 Control Circuit 12V or 24V 1.2W Auxiliary Output Options ~2-3W Driver Standby Power UL Listed / Class P IEE C62.41 6kV Transient Protection Short F-Can Housing Programmable Dimming Features KSP Driver Operating Range: KSP KSP Voltage Current (mA)

95W PA Drivers 2800mA Programmable LED Driver Driver Operating Range: Universal (120-277V) Input Voltage Class 2, 95W Constant Current Output 0-10V Dimming to 5% Dim-to-Off Class 1 or Class 2 Control Circuit 12V or 24V 1.2W Auxiliary Output Options ~2-3W Driver Standby Power UL Listed / Class P IEE C62.41 6kV Transient Protection F-Can or VF-Can Housing Programmable Dimming Features KSP Driver Operating Range: KSP KSP Voltage Current (mA)

LDPC000A Configuration Tool

EVERset Programming Software Programming Solution LDPC000A Configuration Tool EVERset Programming Software PA and PWA Drivers LDPC000A Configuration Tool Supports wired or wireless programming PWA drivers can be programmed either wirelessly or via a wired connection PA drivers can only be programmed via the wired connection Both wired and wireless programming support read/write functionality of the driver Wired programming supports the configuration of up to 6 drivers of the same model with the same configuration at the same time The Planned to support configuration of up to 6 drivers at the same time with a mix of different driver models

EVERset Programming Software

EVERset Programming Software Programming Solution LDPC000A Configuration Tool EVERset Programming Software PA and PWA Drivers EVERset Programming Software Version 1.1.0 is available now Contains the “Engineering” mode for easy creation of driver profiles. Supports read/write of compatible PA and PWA drivers. Version 1.2.0 is under development Addition of “Production” mode for high volume production Includes barcode scanning for loading profiles Adds options for batch programming and log data Does not allow for editing for profiles created in engineering mode Addition of Lumen Maintenance for PA drivers

EVERset Programming Software Adjustment of the output current is easily accomplished on the main tab.

EVERset Programming Software Dimming Profile settings are all listed on one tab. The dimming graph will change based on changes to the dimming profile.

EVERset Programming Software Luminaire profiles can be saved in the Profiles tab for easy recall to program drivers.

Marketing Resources The formal launch e-blast will be sent out the week of Oct 9th for PWA drivers. PA e-blast to follow in November. Feel free to forward the e-blast to your customers. Collateral PDFs (for PWA) are available on www.unvlt.com. PA Flyer and Spec Sheets to follow. Product Flyer Spec Sheets To support the launch of the new drivers, these tactics (among others) will be in play… LED Selector Guide Linear Driver & Modules Brochure Press Release Social Media Blueprint/PESLA Newsletters- December edition Presentation Library

Thank you