SHARE POINT 27/07/2016

BASIC LAYOUT FILES Layout based on task list for the TDR.   Responsible/Contact Prority Remark 1) The new blade 1.1) Design Beam element Valencia (Carlos) High-before TDR 1.2) Location of beam element 1.3) Joints of beam element 1.4) Prototyping Desy (Sergio) depends on Autoclave 2) Petals & Locking points 2d 2.1) Revisit locking points Nikhef (Martin) 2.2) Desing Tool for locking inner lock. before TDR 2.2) FEA with locking points Valencia (Michel Angel) 2.3) Design Tooling for Handling petals Desy (Volker) 2.4) Revisit Petal core with 1 mm pipes 3) Stiffening disk From concept to Design Nikhef/Valencia (Michel Angel and Jesse) FEA Prototype Nikhef (Auke-Pieter) 4) Service module 4.1) Revisit concept Valencia (Pepe) 4.2) Design patch panel (envelopes) 4.3) Pipe diameter (1mm?) Nikhef (Afrodite/Auke-Pieter) 4.4) Bellows: validation Nikhef pending on 4.3 4.5) Thermal FEA service module 5) Global Structure of EC 5.1) Design 5.1) FEA for system stiffness 6) Inner cilinder Open question on Pixel PST/Ian 6.1) Design 6.1) FEA for system stiffness

LAYOUT MAIN FOLDERS SUBFOLERS New Blade Cad designs Simulations Petals & Locking Points Physical tests Stiffening Disk Drive store Service Module Each Main folder has 3 subfolders for Cad, simulations and tests respectively. Information will be loaded in particular way for each subfolder. Global Structure Inner Cylinder Joints and adhesives

CAD FOLDER Format subfolders of cad designs: “Name_of_the_cad_’Version’” CAD subfolders Files (step and report) Global_endcap_structure_A Global_endcap_structure.stp CAD DESIGNS Global_endcap_structure_B Global_endcap_structure.ppt/.pptx/.pdf Simplified_endcap_structure_A Format step file: “Name_of_the_cad.stp” Format report file: “Name_of_the_cad.ppt/.pptx/.pdf”

CAD FOLDER Report file has to contain the next information as minimum : Date: The date of the upload. Author: Name of the designer/designers and the name of the institute he/they belong. Update: in case of update of existing cad file, summary of main changes between old and new version. Extra information can be included in the report file if necessary.

SIMULATIONS FOLDER Format subfolders of Simulations: “Name_of_the_simulation_’Version’” SIM subfolders Files (step and report) Modal_fem_ED_A Modal_fem_ED.stp SIMULATIONS Modal_fem_ED_B Modal_fem_ED.ppt/.pptx/.pdf Thermal_sim_global_sructure_A Format step file: “Name_of_the_simulation.stp” Format report file: “Name_of_the_simulation.ppt/.pptx/.pdf”

SIMULATIONS FOLDER Report file has to contain the next information as minimum : Date: The date of the upload. Author/s and institute Summary and Goal Simplifications: Which and why. Materials: Define all the materials employed, and the properties needed to run the simulation. Connections?: summary about connections employed in the model, focusing on important joints. Constraints: Which and why. Loads applied Results: Summary about the results. Graphics, interpretations and conclusions. Update: in case of update of existing simulation folder, summary of main changes between old and new version. Extra information can be included in the report file if necessary.

PHYSICAL TESTS FOLDER Format subfolders of Simulations: “Name_of_the_test_’Version’” TEST subfolders Files (data file and report) Modal_free_analysis_of_petal_A Modal_free_analysis_of_petal.txt/.xlsx PHYSICAL TESTS Modal_free_analysis_of_petal_B Modal_free_analysis_of_petal.ppt/.pptx/.pdf Impact_analysis_glue_A Format data file: “Name_of_the_test.txt/.xlsx” Format report file: “Name_of_the_test.ppt/.pptx/.pdf”

PHYSICAL TESTS FOLDER Report file has to contain the next information as minimum : Date: The date of the upload. Author/s and institute Summary and Goal Pictures of the system under testing Explanation of data exposed Materials: Define all the materials employed, and the properties linked with the test. Connections: summary about connections employed in the test, focusing on important joints. Constraints: Define the constraints in the test. Loads applied Results: Summary about the results. Plots, interpretations and conclusions. Update: in case of update of existing simulation folder, summary of main changes between old and new version. Extra information can be included in the report file if necessary.