Skills Instruction Backpacking Stoves

Slides:



Advertisements
Similar presentations
Skills Instruction Backpacking Stoves
Advertisements

Chemistry safety Part 2.
CHAPTER 45 Engine Lubrication.
Using Gas Welding Equipment
Harkness career center
Metering Pump Spare Parts Replacement. Pump Components (Metering Pump) Pumps are supplied with a 120VAC or 240VAC power cord. Use care to ensure pump.
General Rules Compressed gases and cylinders must be properly stored, transported and used to prevent injury and accidents. Compressed gases and cylinders.
Oxygen And Acetylene Safety
SAFE PROPANE TORCH USAGE
Unit: Oxy-Acetylene; Welding, Brazing, Cutting & Heating
Yamaha oil pump rebuild
| Vigyan Ashram | INDUSA PTI |1 Vigyan Ashram (A center of Indian Institute Of Education) At. Post Pabal Dist. Pune
Skills Instruction Backpacking Stoves Your name Troop Guide N Totem here.
| Vigyan Ashram | INDUSA PTI |1 Vigyan Ashram (A center of Indian Institute Of Education) At. Post Pabal Dist. Pune
LAB SAFETY Objective(s): To review and summarize laboratory safety concepts and laboratory practices.
OXYFUEL WELDING. INTRODUCTION Oxyfuel welding is a welding process where the heat for fusion is supplied by a torch using oxygen and a fuel gas. Several.
Oxy-fuel Welding and Cutting By: John Templeton
Andrew Brock. Terms  The burning qualities of gases are used in Ag Mechanics to heat, weld and cut metals  Weld- to join by fusion  Fusion- melting.
Welding and Cutting Safety Safety Unit Lesson 5. Oxy-Fuel Welding & Cutting Oxy-fuel welding and cutting are the most common causes of fires in the welding.
Terms and Definitions Base Metal: Metal to be welded Fusion Welding: process that joins metals by heating them to a melting point and allowing them to.
ThermexWELD Exothermic Welding Training Guide
Skills Instruction Backpacking Stoves Your Name Troop Guide N Totem Here.
How To Replace Your Fuel Filter On a 1998 Mustang GT.
Before we learn how to extinguish fires, we first need to know a little about how they work. The fire triangle to the right shows the three things that.
COOKER (2 Litres) 1.Brief Research Cost of Cooker :- Rs.1250 – 2500/- Types of Cooker :- 1. Ordinary pressure cooker 2. Electric pressure cooker 3. Solar.
True cooking is hardly effortless. We often forget how long it takes to prepare a meal. Throwing a frozen box in the microwave for a few minutes is much.
A. General Safety Rules 1. Listen to or read _________ carefully before attempting to do anything. 2. Wear safety goggles to protect your _________.
Backpacking Stoves* *Excerpts from REI Information Guide Considerations –Fuel –Fuel Capacity –Burn Time –Average Boil Time –Liters of Water Boiled per.
Lab Safety Chemistry. Why Lab safety? It is a part of your laboratory experience. Many substances can be dangerous if handled improperly Lab equipment.
CLM Maintenance. Covers : 1 - Side cover, 2 - Back cover, 3 Top cover, 4 - Lamp door, 5 - Side cover input and communication side, 6 - HEPA dust filter,
Copyright © 2010 Delmar, Cengage Learning. ALL RIGHTS RESERVED. Unit 23 Using Gas Welding Equipment.
Welding and Cutting Safety
5 th and 8 th Mr. Luper.  Keep the cylinders upright at all times  In storage  On carts  Keep cylinders secured  Mark cylinders when empty  Write.
Oxy-Fuel Welding. What is Oxy-Fuel Welding? Process the fuses metal together Does not require electricity Uses a torch and filler rod Similar equipment.
Skills Instruction Backpacking Stoves Your name Troop Guide N Totem here.
The Welding/Cutting Torch Objective 25.0 Demonstrate proper procedures for oxyacetylene processes.
Chain Saw Safety 10-4 training 10 Slides, 4 minutes Lehigh/Hanson Region West Safety and Health.
Shop safety (General). Safety comes first! l Always wear safety glasses. l When working with heated objects, always wear gloves. l No running or horseplay.
Oxyacetylene Fusion Welding Safety Review
Copyright © 2016 by The S.E.A. Group
Teknologi Dan Rekayasa
Skills Instruction Backpacking Stoves
Using Gas Welding Equipment
Laboratory Safety Rules
Lab Safety.
Safety Curriculum Project ChildSafe Putting A Lock On Safety!
Proper Procedures for Oxyacetylene Processes
Safety in Floriculture “For Your Protection”
Oxy-Acetylene Torches
Unit 22 Ag mechanics Using gas equipment.
Safety A top priority!.
Power Tool Safety Don’t operate a machine until:
Applying Preventative Maintenance Practices
Chapter 8 – Cutting Processes
information in black might be on the Safety Quiz!!
Lab Safety.
CHAPTER 45 Engine Lubrication.
Lab Safety In Science Class.
Skills Instruction Backpacking Stoves
Safety Stuff.
Safety Rules and Symbols
1 Safety in the Small Gas Engine Shop. 1 Safety in the Small Gas Engine Shop.
Safety Rules and Symbols
A. General Safety Rules 1. Listen to or read instructions carefully before attempting to do anything. 2. Wear safety goggles to protect your eyes from.
Lab Safety.
Ethanol - Corn Mash and Distillation
General Shop Safety Thinking Safe… Prevents Injury!
Oxygen Acetylene Cutting Torch
Need SME in put especially for the video scripts
Ethanol - Corn Mash and Distillation
Presentation transcript:

Skills Instruction Backpacking Stoves Totem here Your name Troop Guide N5-347-11-1

Skills Instruction Backpacking Stoves Promote note taking Handout at the end 1A N5-347-11-1

Learning Objectives Upon completion of this presentation you will be able to: Explain why and when we use effective skills instruction in BSA. Explain the steps in effective skills instruction. 2 N5-347-11-1

Learning Objectives Upon completion of this presentation you will be able to: Explain why and when we use effective skills instruction in BSA. Explain the steps in effective skills instruction. A portion of every troop meeting is set aside for “skills instruction”. Set the stage: Young scouts going on 1st Backpacking trip and need to know how to use the stoves safely or the troop just bought new stoves and we are learning how to use them safely. 2A N5-347-11-1

Your name Troop Guide N5-347-11-1 Backpacking Stoves Your name Troop Guide N5-347-11-1 3

Your name Troop Guide N5-347-11-1 Backpacking Stoves Your name Troop Guide N5-347-11-1 3A

Learning Objectives Upon completion of this presentation you will be able to: Explain the differences between the basic types of backpacking stoves. Explain the differences between the different types of backpacking stove fuels. Explain the safety rules for backpacking stove. Safely use a backpacking stove. 4 N5-347-11-1

Learning Objectives Upon completion of this presentation you will be able to: Explain the differences between the basic types of backpacking stoves. Explain the differences between the different types of backpacking stove fuels. Explain the safety rules for backpacking stove. Safely use a backpacking stove. 4A N5-347-11-1

Types of Stoves Integral Fuel Container fuel container connected directly to the stove External Fuel Container fuel container is separate and connected by a fuel line 5 N5-347-11-1

Backpacking Spring issue evaluates backpacking stoves Types of Stoves Integral Fuel Container - This type of stove has the fuel container connected directly to the stove. External Fuel Container - The fuel container is separate from this type of stove and connected by a fuel line. There are many types of backpacking stoves that range from the basic to the exotic. The stove you choose will depend upon your requirements, such as ease of handling, weight, bulk, and type of fuel. Backpacking Spring issue evaluates backpacking stoves Pass around Campmor catalogue with stoves highlighted. 5A N5-347-11-1

Types of Fuels Liquid Compressed Gas white gas, refined kerosene and alcohol Compressed Gas propane, isobutane and propane/butane mix N5-347-11-1 6

Types of Fuels There are two types of fuels available for backpacking stoves. Liquid – white gas, refined kerosene, and alcohol. Liquid fuels require being transferred into an external or internal fuel cylinder depending upon the stove. Compressed Gas – propane, isobutane and propane/butane mix come in one time use cylinders. 6A N5-347-11-1

Stove Safety BSA Stove Safety Resources Scoutmaster Handbook Guide to Safe Scouting Boy Scout Handbook MCBSA Adult Basic Backpacking Course Any other backpacking courses 7 N5-347-11-1

Stove Safety BSA Stove Safety Resources Scoutmaster Handbook Guide to Safe Scouting Boy Scout Handbook MCBSA Adult Basic Backpacking Course Any other backpacking courses Ask what are some dos and don’ts of stove / gas safety Then follow up with the schooled answers. 7A N5-347-11-1

Stove Safety Continued Liquid fuels and compressed gas can be dangerous, use extreme caution when using them. Always check the stove manual to ensure you are using the correct type of fuel. Never pour fuel into or near a hot stove. Allow sufficient time for fuel vapors to disperse before attempting to light a stove after pouring fuel. Always use with adult supervision. 8 N5-347-11-1

Stove Safety Continued Liquid fuels and compressed gas can be dangerous, use extreme caution when using them. Always check the stove manual to ensure you are using the correct type of fuel. Never pour fuel into or near a hot stove. Allow sufficient time for fuel vapors to disperse before attempting to light a stove after pouring fuel. Always use with adult supervision. 8A N5-347-11-1

Stove Safety Continued Use the heat shield between the stove and the fuel cylinder. Hand tighten pumps and cylinders. When removing a fuel bottle, pressure must be released slowly to avoid spraying or spilling fuel. Be careful not to cross-thread gas fittings when connecting them to a stove or fuel line. Never store any fuel, either compressed gas or liquid, inside a tent or sleeping area. 9 N5-347-11-1

Stove Safety Continued Use the heat shield between the stove and the fuel cylinder. Hand tighten pumps and cylinders. When removing a fuel bottle, pressure must be released slowly to avoid spraying or spilling fuel. Be careful not to cross-thread gas fittings when connecting them to a stove or fuel line. Never store any fuel, either compressed gas or liquid, inside a tent or sleeping area. 9A N5-347-11-1

Stove Safety Continued Always operate stoves on a flat stable surface that is free from burnable material. If the stove is designed to burn multiple types of fuel, pick one and stick with it. DON’T MIX! Fuel bottles should be treated the same way. Always follow manufacturers instructions. The most important safety feature of any stove is a trained operator. 10 N5-347-11-1

Stove Safety Continued Always operate stoves on a flat stable surface that is free from burnable material. If the stove is designed to burn multiple types of fuel, pick one and stick with it. DON’T MIX! Fuel bottles should be treated the same way. Always follow manufacturers instructions. The most important safety feature of any stove is a trained operator. 10A N5-347-11-1

Stove Preparation For today’s demonstration, we will use a MSR Wisperlite Shaker Jet stove. To operate this stove we need the following materials: One MSR Wisperlite Shaker Jet One Fuel Bottle (filled with liquid fuel) Matches or lighter Repair kit N5-347-11-1 11

Stove Preparation (Ask for a volunteer. Explain: I am going to demonstrate how to instruct someone on how to safely operate a backpacking stove). For today’s demonstration, we will use a MSR Wisperlite Shaker Jet stove. To operate this stove we need the following materials: One MSR Wisperlite Shaker Jet Stove One Fuel Bottle (filled with liquid fuel) Matches or lighter Repair kit N5-347-11-1 11A

Assembling the Stove Remove stove from carrying case. Unscrew the fuel bottle cap and fill the bottle to the fill line. Be sure to keep the bottle away from your face and others. (demonstrate) Screw the pump snugly into the fuel bottle. Pump the plunger 25-35 strokes. If bottle is half full pump 40-55 strokes or until firm resistance is felt when pushing the plunger down. (The less fuel, the more pumps) Rotate the legs into the slots in the frame N5-347-11-1 12

Assembling the Stove Remove stove from carrying case. Unscrew the fuel bottle cap and fill the bottle to the fill line. Be sure to keep the bottle away from your face and others. (demonstrate) Screw the pump snugly into the fuel bottle. Pump the plunger 25-35 strokes. If bottle is half full pump 40-55 strokes or until firm resistance is felt when pushing the plunger down. (The less fuel, the more pumps) Rotate the legs into the slots in the frame N5-347-11-1 12A

Assembling the Stove Lubricate the end of the fuel line lightly with MSR Pump Cup Oil (saliva or other mineral-base lubricant), then insert it into the fuel tank bushing on the pump. Snap the catch are securely into the slot on the pump body. Put the heat reflector under the stove. Bend fuel line to allow stove to sit squarely on the ground. N5-347-11-1 13

Assembling the Stove Lubricate the end of the fuel line lightly with MSR Pump Cup Oil (saliva or other mineral-base lubricant), then insert it into the fuel tank bushing on the pump. Snap the catch are securely into the slot on the pump body. Put the heat reflector under the stove. Bend fuel line to allow stove to sit squarely on the ground. N5-347-11-1 13A

Operating the Stove Before lighting the stove check that: Stove assembly has no fuel leaks. Area is clear of flammable materials Catch arm is locked and stove is properly assembled. N5-347-11-1 14

Operating the Stove Before lighting the stove check that: Stove assembly has no fuel leaks. Area is clear of flammable materials Catch arm is locked and stove is properly assembled. N5-347-11-1 14A

Operating the Stove Priming instructions for white gas: Priming pre-heats the stove to turn the liquid fuel into vapor. To pre-heat properly, the priming flame must contact the generator tube. Insufficient priming may result in flare-up. N5-347-11-1 15

Operating the Stove Priming instructions for white gas: Priming pre-heats the stove to turn the liquid fuel into vapor. To pre-heat properly, the priming flame must contact the generator tube. Insufficient priming may result in flare-up. N5-347-11-1 15A

Operating the Stove Priming Open control valve 1-2 turns until fuel flows through the Jet and fills the priming cup ½ full Turn the control valve off . Check for leaks at the control valve, pump, jet and fuel line. If leaks are found, do not use stove and see troubleshooting. Light the priming fuel. Place the windshield around the stove, then fold the ends together to keep it securely in place N5-347-11-1 16

Operating the Stove Priming Open control valve 1-2 turns until fuel flows through the Jet and fills the priming cup ½ full Turn the control valve off . Check for leaks at the control valve, pump, jet and fuel line. If leaks are found, do not use stove and see troubleshooting. Light the priming fuel. Place the windshield around the stove, then fold the ends together to keep it securely in place. N5-347-11-1 16A

Operating the Stove Turning the Stove on: When the priming flame is down to a small flame (about 30-60 seconds), slowly open the valve . If the stove : Goes out, turn the control valve off . Burns with erratic yellow flames, but the priming cup is still burning, turn the control valve off and pre-heat longer. Burns with a blue flame, wait a minute then adjust to desired setting. There is a delay between turning the control valve and changes in flame. N5-347-11-1 17

Operating the Stove Turning the Stove on: When the priming flame is down to a small flame (about 30-60 seconds), slowly open the valve . If the stove : Goes out, turn the control valve off . Burns with erratic yellow flames, but the priming cup is still burning, turn the control valve off and pre-heat longer. Burns with a blue flame, wait a minute then adjust to desired setting. There is a delay between turning the control valve and changes in flame. N5-347-11-1 17A

Operating the Stove Turning the Stove on: To maintain stove performance, pump the plunger 3-5 strokes as needed to keep enough pressure in the fuel tank. You should feel firm resistance when you pump down on the plunger. The less fuel in the bottle , the more pumps needed to keep pressure. DO NOT over pressurize. Fuel bottle pressure that is to high causes erratic flames. Low pressure causes low flames and very slow burn times. N5-347-11-1 18

Operating the Stove Turning the Stove on: To maintain stove performance, pump the plunger 3-5 strokes as needed to keep enough pressure in the fuel tank. You should feel firm resistance when you pump down on the plunger. The less fuel in the bottle , the more pumps needed to keep pressure. DO NOT over pressurize. Fuel bottle pressure that is to high causes erratic flames. Low pressure causes low flames and very slow burn times. N5-347-11-1 18A

Operating the Stove Turning the Stove on: To simmer, operate the stove at low fuel pressure. Turn the control valve down until the flame becomes unsteady, then open the control valve until the flame stabilizes N5-347-11-1 19

Operating the Stove Turning the Stove on: To simmer, operate the stove at low fuel pressure. Turn the control valve down until the flame becomes unsteady, then open the control valve until the flame stabilizes. N5-347-11-1 19A

Operating the Stove Turning the Stove off: Turn the control valve off . The flame will take a minute or so to die out. WAIT for the stove to cool before disassembling!! Depressurize the fuel tank by unlocking the catch arm and pulling the fuel line out of the pump assembly. Away away from heat, sparks, or flame, hold the fuel bottle upright, turn the pump assembly away from you, and unscrew the pump to release pressure. N5-347-11-1 20

Operating the Stove Turning the Stove off: Turn the control valve off . The flame will take a minute or so to die out. WAIT for the stove to cool before disassembling!! Depressurize the fuel tank by unlocking the catch arm and pulling the fuel line out of the pump assembly. Away away from heat, sparks, or flame, hold the fuel bottle upright, turn the pump assembly away from you, and unscrew the pump to release pressure. N5-347-11-1 20A

Operating the Stove Turning the Stove off: For transporting or storing: leave the pump assembly in the fuel bottle or, to be sure the control valve does not open by mistake, unscrew the pump and replace it with the fuel bottle cap. N5-347-11-1 21

Operating the Stove Turning the Stove off: For transporting or storing: leave the pump assembly in the fuel bottle or, to be sure the control valve does not open by mistake, unscrew the pump and replace it with the fuel bottle cap. N5-347-11-1 21A

Learning Objectives Upon completion of this presentation you will be able to: Explain the differences between the basic types of backpacking stoves. Explain the differences between the different types of backpacking stove fuels. Explain the safety rules for backpacking stove. Safely use a backpacking stove. 22 N5-347-11-1

Learning Objectives Upon completion of this presentation you will be able to: Explain the differences between the basic types of backpacking stoves. Explain the differences between the different types of backpacking stove fuels. Explain the safety rules for backpacking stove. Safely use a backpacking stove. 22A N5-347-11-1

Thank You! N5-347-11-1 23

Thank You! N5-347-11-1 23A

Skills Instruction Skills Instruction is an integral part of Cub Scouting, Boy Scouting and Venturing. It is how Scouts learn most of their skills. Scouting’s approach to skills instruction is: See it Do it Test it Review it Another way to put it is this: Explain Demonstrate Guide Enable N5-347-11-1 24

Skills Instruction Skills Instruction is an integral part of Cub Scouting, Boy Scouting and Venturing. It is how Scouts learn most of their skills. Scouting’s approach to skills instruction is: See it Do it Test it Review it Another way to put it is this: Explain Demonstrate Guide Enable N5-347-11-1 24A

Great leaders are great Teachers N5-347-11-1 25

Great leaders are great teachers I would like to encourage all patrol members to watch the teaching techniques of the presenters throughout the Wood Badge Course. What can be learned about teaching methods by studying good instructors can be every bit as valuable as the material they are presenting. N5-347-11-1 25A

Learning Objectives With the completion of this presentation can you now: Explain why and when we use effective skills instruction in BSA? Explain the steps in effective skills instruction? 26 N5-347-11-1

Learning Objectives Upon completion of this presentation you will be able to: Explain why and when we use effective skills instruction in BSA. (While the example here was at a troop meeting, skills are taught during Cub Den meetings and during Venturing meetings) Explain the steps in effective skills instruction. (See it, Do it, Test it and Review it) 26A N5-347-11-1

Thank You! N5-347-11-1 27