G3_Diagnostic Tool SOP_v0.1_2013-12-10.ppt CN_SDD Release Date: 2013-12-10 1

Revision History Date Version Description Author 2013/12/10 v0.1 Initial version Rock Version 2

Content Start ACTP UI Test Items Main UI Testing UI Test Report UI Touch Slope Double Touch RGB HW Keys Front Camera Speaker Top Mic SD Card G-sensor Notice: All the pictures are schematic diagram. Version 3

Start ACTP ACTP will launch automatically after the ServiceROM is installed. If it doesn’t you may launch it manually: 1. On the APPs list, look for the application called “ACTP”. 2. Tap the icon to start ACTP testing process 4

UI 1. Main UI ACTP tests the function of TouchSlope, DoubleTouch, RGB, HW Keys, Front Camera, Speaker, Top Mic , SD Card and G-sensor. Select the function(s) you want to test, tap “OK” to start. Version 5

UI 2. Testing UI Test items status window: at left side of UI. It displays the status of test items. The main test window: A direction window to tell user to do action as screen mentioned. If wanting to exit tests mandatory, user can long press the ACTP logo at left corner.

UI 3. Test Report UI After test, the result will be shown on screen as below picture. 4 kinds of color to present 4 statuses. Green : Means the test item passed. Red : Means the test item failed. Yellow : Means the test item still been testing at background. Grey : Means not tested items. 4 User Operation: Long press any one color button will retest single test item. Long Press yellow item will exit background test. Press “EXIT”button will exit ACTP. Press “RETEST”button will retest failed and non-tested items.

Test Items 2. TouchSlope Test Draw a line from top left corner to bottom right corner on the screen. Draw a line from top right corner to bottom left corner on the screen. Tester has 3 times to draw each line. If you fail more than 3 times, TouchSlope Test will fail. Version 8

Test Items 3. Double Touch Test This is for testing 2 point touch on the panel. Use 2 fingers to draw from left to right on blue bar. When successful drawing the top blue bars, the tester will need to draw the blue bars on the right, bottom, and left. Tester has 3 times to draw the blue bar. If you fail more than 3 times, Double Touch test will fail. Version 9

Test Items 4. RGB Test Press vol+ hardware key to start test. Press vol- hardware key to switch to next color. Screen will display as below sequence: Red‐Green‐Blue‐Black‐White Tester needs to judge the test result by pressing “PASS” or “FAIL”button. Press “RETEST”button for retest. Version 10

Test Items 5. HW Keys Test Tester presses volume down/up keys. The color of Vol‐/Vol+ words on screen will be changed if HW keys work and pass. Tester also can judge it as failed by touching “FAIL”button. Version 11

Test Items 6. Front Camera Test Tap the capture button to test picture taking functionality and check the quality of the picture. Press “PASS” or “FAIL” button to judge the test result, or press “RETEST” button to retest. Version 12

Test Items 7. Speaker Test Touch screen to start test. It will play two songs. When finished playing music, chose which song played first and second. If right, it will pass. User can touch “FAIL” button to judge the result as failed or “RETEST” to retest the item. Qinghai-Tibet Plateau - “Ah Ah Ah Ah…” Tin Road – “Te He He He…” Qinghai-Tibet Plateau / Qinghai-Tibet Plateau Qinghai-Tibet Plateau / Tin Road Tin Road / Qinghai-Tibet Plateau Tin Road / Tin Road Version 13

Test Items 8. Inner Audio Test Touch screen to start to test. Test sounds will play. Judge test result by touching “PASS” or touch “Retry” button to retest. Version 14

Test Items 9. SD Card Test A message will be shown on the lower right corner to tell the user to plug in an SD card. Plug in SD card and it will be tested. If test OK, a message will be shown on the lower right corner to tell the user to remove the tested SD card. Remove the SD card. The status of this test item will be marked green on the status window. If user ignores it until timeout, it will be judged as failed and marked as red on the status window. Version 15

Test Items 10. G-sensor Test The G-sensor test will test if the g-sensor module exists or not. If it exists, this test item will pass automatically. Version 16

Test Items 11. Power Off Once Diagnostics are complete, an ACTPPASS screen appears. Power off the tablet. If you need to write the SN and WiFi code, power on the tablet again and choose EXIT when the ACTP app automatically launches. Version 17

Thank You! Version 18