Gyro Sensor Positioning

Slides:



Advertisements
Similar presentations
Building a Robot for Our Lessons
Advertisements

By Sanjay and Arvind Seshan
By Sanjay and Arvind Seshan
BEGINNER PROGRAMMING LESSON
EV3 & Swift: Getting STARTED
By Sanjay and Arvind Seshan
By Sanjay and Arvind Seshan
By Sanjay and Arvind Seshan
BEGINNER PROGRAMMING LESSON
By Sanjay and Arvind Seshan
SIMPLE & OPTIMIZED ULTRASONIC WALL FOLLOW
BEGINNER PROGRAMMING LESSON
BEGINNER PROGRAMMING LESSON
SIMPLE & OPTIMIZED ULTRASONIC WALL FOLLOW
BEGINNER EV3 PROGRAMMING Lesson
BEGINNER EV3 PROGRAMMING Lesson
BEGINNER PROGRAMMING LESSON
By Sanjay and Arvind Seshan
Gyro Turns © 2015 EV3Lessons.com, Last edit 12/19/2015.
Using the Gyro Sensor and Dealing with Drift
INTERMEDIATE PROGRAMMING LESSON
INTERMEDIATE PROGRAMMING LESSON
INTERMEDIATE PROGRAMMING LESSON
By Sanjay and Arvind Seshan
Downloading & Uploading Files
Gyro Move Straight & Gyro Wall Follow
Color sensor positioning & shielding
Lesson 4: Aligning on Lines On The Mat
BEGINNER PROGRAMMING LESSON
BEGINNER PROGRAMMING LESSON
By Sanjay and Arvind Seshan
BEGINNER PROGRAMMING LESSON
INTERMEDIATE PROGRAMMING LESSON
IMPORTING HITECHNIC BLOCKS
BEGINNER PROGRAMMING LESSON
BEGINNER EV3 PROGRAMMING Lesson
INTERMEDIATE PROGRAMMING LESSON
BEGINNER EV3 PROGRAMMING Lesson
Using the Gyro Sensor and Dealing with Drift
Gyro sensor positioning
By Sanjay and Arvind Seshan
BEGINNER PROGRAMMING LESSON
Repeating Actions (Loops)
By Sanjay and Arvind Seshan
Line Followers: Basic to Proportional
BEGINNER PROGRAMMING LESSONS
Lesson 6: aligning on Walls & MODELS
BEGINNER PROGRAMMING LESSON
Color Sensor Positioning and Shielding
BEGINNER PROGRAMMING LESSON
Downloading & Uploading Files
Line Followers: Basic to Proportional
INTERMEDIATE PROGRAMMING LESSON
By Sanjay and Arvind Seshan
By Sanjay and Arvind Seshan
Color Sensor Positioning and Shielding
INTERMEDIATE PROGRAMMING LESSON
BEGINNER PROGRAMMING LESSON
Passive Attachments Robot DESIGN Lesson.
BEGINNER PROGRAMMING LESSONS
Passive Attachments Robot DESIGN Lesson.
By Sanjay and Arvind Seshan
Common Parts on a LEGO robot
By Sanjay and Arvind Seshan
BEGINNER EV3 PROGRAMMING Lesson
BEGINNER PROGRAMMING LESSON
BEGINNER PROGRAMMING LESSON
BEGINNER EV3 PROGRAMMING Lesson
Using the Gyro Sensor and Dealing with Drift
Proportional Line Follower
Presentation transcript:

Gyro Sensor Positioning Robot DESIGN Lesson

How Many Gyros should your robot have? Depends on how many different axis you want to measure For example, if you were making a joystick, you might need two Note: We conducted a test to see if adding two gyro sensors will allow you to cancel out drift. Our tests show that two sensors may allow you to average your error, but do not cancel/reduce the drift. To learn about drift and lag, see our Gyro programming lessons in Advanced. © 2016 EV3Lessons.com, Last Edit 8/4/2016

GYRO SENSOR PLACEMENT For MEASURING TURNS The gyro sensor can be placed any where on the robot. However, the “correct” position depends on what you are building If you are using the gyro to measure turns, some positions just will not work. (Refer to images on this page) X X ✓ X © 2016 EV3Lessons.com, Last Edit 8/4/2016

Sample Installations of the gyro In this robot, the Gyro Sensor is prominently visible The symbol on the sensor is parallel to the ground © 2016 EV3Lessons.com, Last Edit 8/4/2016

Sample Installations of the gyro In this robot, the Gyro Sensor is barely visible and under the brick The symbol on the gyro is still parallel to the ground Tip: Place the sensor where you have space on the robot (somewhere hidden away is fine as you do not really need access to it once you connect it). © 2016 EV3Lessons.com, Last Edit 8/4/2016

GYRO POSITION For a balancing robot The gyro needs to be placed based on what you are trying to do For a balancing robot (such as Gyro Boy) you need to have to gyro facing the sky or the ground The gyro sensor in this model is hidden between the two motors © 2016 EV3Lessons.com, Last Edit 8/4/2016

GYRO POSITION For a TILTING ROBOT For a game like Etch-a- Sketch, where you tilt the entire robot to erase the screen, you need the gyro to be sideways (see image) The gyro in this robot does not measure turns. It measures if you flipped the robot © 2016 EV3Lessons.com, Last Edit 8/4/2016

Credits This tutorial was created by Sanjay Seshan and Arvind Seshan More lessons at www.ev3lessons.com                           This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. © 2016 EV3Lessons.com, Last Edit 8/4/2016