Pilot Watcher Product Overview V5.3

Contents Overview Product Details Main Features Conclusion

Product Introduction Pilot Watcher is a software based solution that is used to locally monitor the performance and measurement of DingLi remote measurement equipment’s test modules. Pilot Watcher runs on an Android tablet and can be connected to a Pilot RCU, Pilot RCU Light, and Pilot Scout through WiFi (via a device hotspot) for real-time service test monitoring. Users may monitor the onsite test modules’ parameters, events, MOS score, alarms, GPS-based test routes, test plans, etc., and reboot the Pilot RCU device through Pilot Watcher. Pilot Watcher can be connected to only one test equipment for monitoring at one time.

Recommended Tablet The image shown here is for illustrative purposes only. Any Android tablet with the recommended specifications can be used. Recommended specifications: Operating System: Android 4.0 or later Screen Size: 7-10-inch screen recommended to ensure good visualization

Contents Overview Product Details Main Features Conclusion

Pilot Watcher System Architecture Android Tablet Pilot RCU Control Interaction Wi-Fi Connection Data Interaction Test Plans Status Data System Architecture Pilot Fleet Unify

Software Operation Once installed, users may find and tap Pilot Watcher installed on the tablet to run it.

Main Interface Test channel management Connect device for service test View alarms View modem configuration View test device information Reboot test device

Version Compatibility Pilot RCU 2.0: Version 10.10.2.1104 or later versions. Pilot RCU2.0 (quad-core) is recommended. Pilot RCU Light 3.0: Version 11.11 or later versions Pilot Scout 2.0: Version 9.10 or later versions Pilot Scout 2.1: Version 12.11 or later versions

Contents Overview Product Details Main Features Conclusion

Monitor Measurement Parameters Monitor measurement parameters of test modules Measurement parameters decoded by the test module, and uploaded to the tablet through WiFi Monitor parameters of two test modules at the same time (e.g. MO and MT modules)

Monitor Measurement Events Monitor measurement events of test modules Measurement events decoded by the test module, and uploaded to the tablet through WiFi Monitor events of two test modules at the same time (e.g. MO and MT modules)

Monitor Layer 3 Messages Monitor Layer 3 messages of test modules Layer 3 messages decoded by the test module, and uploaded to the tablet through WiFi Monitor Layer 3 messages of two test modules at the same time (e.g. MO and MT modules)

Monitor Alarms Information about device connection and test plan displayed under Status. Basic device status and module rebooting exceptions displayed under Device Alarm

Customize Parameters for GPS Test Route Users may customize the threshold and display color for the measurement parameters to be displayed in the Map window.

Monitor GPS-Based Test Route Real-time GPS-based measurement route and automatic cell line linking after importing site database Measurement data with GPS geo-location can be displayed on the map Line to serving cell between test location and corresponding serving cell

Monitor Real-time Serving Cell Lines Users may import cell files and monitor the line to serving cells between serving cells and test modules. It is recommended to obtain the latest site database from operators.

Monitor MOS Scores Monitor real-time MOS scores .

View Test Device Information View test device information including Device ID Kernel version Disk space GPS status Files to upload

View Test Plans View test plans of each test module Display major information of the test plan Note: This version does not allow test plans to be edited. Its only for viewing purposes.

View Modem Information View information about Modem configuration RAS and APN information Server IP and port Log file partition mode Note: This version does not allow Modem configuration to be edited. Its only for viewing purposes.

View Pre-defined Test Route Import the pre-defined test route (*.KML/KMZ format) to the Map window, which will be displayed in grey Conduct service test based on pre-defined test route

Control Service Test When Pilot Watcher is connected to a test device, users may manually pause, stop, or restart the service test.

Reboot Test Device When Pilot Watcher is connected to a device, users may send a reboot command to the test device from Pilot Watcher. The test device will reboot when receive the command.

Conclusion 1 2 3 4 5 Real-time network and test device monitoring Portable, easy to operate, with user friendly interface 3 No restrictions on public network as it is connected to test device through WiFi (device hotspot) 4 Efficient way for technician to troubleshoot the onsite remote measurement probe 5 Another option to evaluate the test modules performance locally, other than waiting for alarms report from administrator