DVB-T/DVB-T2 BIII TRANSMISSION EQUIPMENT

Low Power DVB-T VHF BIII Transmitters Range Model 3D0K1A Power Range 10W- 100W Digital Adaptive Precorrection Broadband all over VHF BIII MFN and SFN Operation Software upgrade to DVB-T2 Seamless input switching Efficient low noise forced air cooling 3.5” touch screen control panel 1+1 and N+1 management system Internal GPS receiver available SNMP & Web Server remote operation Power consumption 100W: 550W 2 2

Medium Power VHF BIII Transmitters Range (1) Model 3D0K4A Power Range 250W- 400W Digital Adaptive Precorrection Broadband all over VHF BIII MFN and SFN Operation Seamless input switching 7” touch screen control panel Efficient low noise forced air cooling Internal GPS receiver available SNMP & Web Server remote operation Efficiency up to 35% Dual Exciter option available 1+1 and N+1 management system Software upgrade to DVB-T2 One single HPA Module: Two pallets One power supply 3 3

Medium Power VHF BIII Transmitters Range (2) Model 3D0K8A Power Range 500W- 800W Digital Adaptive Precorrection Broadband all over VHF BIII MFN and SFN Operation Seamless input switching 7” touch screen control panel Efficient low noise forced air cooling Internal GPS receiver available SNMP & Web Server remote operation Efficiency up to 35% Dual Exciter option available 1+1 and N+1 management system Software upgrade to DVB-T2 One single HPA Module: Four pallets Two power supplies 4 4

Medium Power VHF BIII Transmitters Range (3) Model 3D1K6A Power Range 800W – 1600W Digital Adaptive Precorrection Broadband all over VHF BIII MFN and SFN Operation Seamless input switching 7” touch screen control panel Efficient low noise forced air cooling Internal GPS receiver available SNMP & Web Server remote operation Efficiency up to 35% Dual Exciter option available 1+1 and N+1 management system Software upgrade to DVB-T2 Two HPA Modules, each one: Four pallets Two power supplies 5 5

High Power VHF BIII Transmitters Range Model 3D2K5A Power Range 2500W- 3500W Digital Adaptive Precorrection Broadband all over VHF BIII MFN and SFN Operation Seamless input switching 7” touch screen control panel Efficient low noise forced air cooling Internal GPS receiver available SNMP & Web Server remote operation Efficiency up to 35% Dual Exciter option available 1+1 and N+1 management system Software upgrade to DVB-T2 Two HPA Modules, each one: - Six pallets - Six power supplies Isolation Transformer on board 6 6

Control Panel User-friendly interface Exciter status and set-up 7” touch screen display User-friendly interface Exciter status and set-up HPA module status and set-up Power/time view Temperature/time view Event history 7 7

Remote control and monitoring system User-friendly interface Protected access to system Web server and SNMP protocol Mobile Application 8 8

General Specifications Frequency Band VHF BIII (174-230 MHz) Power supply 220 VAC or 400/ 230 VAC 3-phase 50 Hz ±1% Cooling System Forced air Operating temp. range +0°C to +45°C Permissible relative humidity 95%, non-condensing Local control 7” Touch-screen graphical display Remote control Web-Server (IP) and SNMP agent Protection against VSWR, Temperature, Overdrive, Overcurrent Clock & Synchronization 10MHz & 1PPS (optional: on-board GPS) Efficiency 35% Typical Standards DVB-T: EN300744, TS101191, DVB-T2: EN302755, TS102831 Transmission Modes MFN, SFN-SISO, SFN-MISO Modulation Modes Syst. A, Syst. B MONO & HYBRID, Multi-PLP Constellation QPSK, 16QAM, 64QAM, 256QAM (Normal or Rotated) Available Inputs 2 x ASI Inputs - 2 x BNC 75OHM seamless switching MER ≥ 34dB Shoulders ≥ 38dB (before output filter)

ELECTROLINK Srl Via delle Acacie - Orvieto (Italia)‏ Tel. +39 0763 305530 sales@electrolink.com ventas@electrolink.com www.electrolink.com