ADVANCED DESIGN & PROCESS TECHNOLOGY FOR INDIA COAL USA THE DANIELS COMPANY (USA) A Member of GT Global ADVANCED DESIGN & PROCESS TECHNOLOGY FOR INDIA COAL Robert Hollis Vice President The Daniels Company

OUTLINE Introduction – The Daniels Company & GT Global USA OUTLINE Introduction – The Daniels Company & GT Global Capability of The Daniels Company Advantages of The Daniels over Its Competitors Benefit from Merging with Beijing Guohua Tech. Group Project Management for India CHPP Examples of previous CHPP projects

GT GLOBAL INTRODUCTION Beijing GT Group The Daniels Company (China) USA INTRODUCTION Beijing GT Group (China) The Daniels Company (USA) +550 Plants (2015) 180 Plants & Coal handling Facilities (2015) GT GLOBAL

COMPETITIVE CHPP DESIGN USA DANIELS’ LONG HISTORY COMPETITIVE CHPP DESIGN THE DANIELS COMPANY (Daniels) is a EPC (Engineering, Procure and Construction) Company with extensive turnkey experience in the design and construction of coal preparation plants, coal storage, reclaim and coal (train/truck) loading facilities. Its special expertise lies in the development of customized, cost effective and efficient processing flow sheets, followed by the translation of this flow sheet into a well designed coal preparation facility.

COMPETITIVE EQUIPMENT MANUFACTURING USA DANIELS’ LONG HISTORY COMPETITIVE EQUIPMENT MANUFACTURING The Daniels Company’s manufacturing arm Daniels Fabrication, manufactures variety of coal processing equipment including Daniels dense media vessels, sieve bends, rotary breakers and automatic level control boxes. Daniels Fabrication also undertakes the fabrication of plate work including chutes, hoppers, sumps, and conveyor components including trusses (up to 60 m span), conveyor tubes, channel pans, bents (up to 75 m height), head, tail and take up frames. Many other major processing equipment can be manufactured by our sister company BGTG.

THE DANIELS COMPANY’S LONG HISTORY USA DANIELS’ LONG HISTORY THE DANIELS COMPANY’S LONG HISTORY Engaged in coal preparation project since 1950s The only company engaged in coal processing & material handling systems to still be in business over 60 years in USA.

DANIELS’ CAPABILITY CAPABILITY: USA DANIELS’ CAPABILITY CAPABILITY: Engineering, Procurement and Construction of coal preparation plants and coal handling facilities Upgrading existing CHPP to improve clean coal recovery efficiency, eliminate bottlenecks and/or coal processing capacity Consulting services – Performance evaluation of coal preparation facility to optimize clean coal recovery efficiency Supply full line of CHPP equipment

DANIELS’ ADVANTAGES OVER ITS COMPETITORS USA DANIELS’ ADVANTAGES DANIELS’ ADVANTAGES OVER ITS COMPETITORS The Daniels Company’s long history has accumulated significant experience of CHPP design and construction Over 180 coal preparation plants and coal handling facilities have been built by The Daniels Company in USA and overseas since it was founded. Coal preparation plants were built with capacity up to 10 MTPA and coal handling facilities were built with capacity up to 30 MTPA. Long distance conveyor system were built with trusses up to 60 meter and bents up to 75 meter height

DANIELS’ ADVANTAGES OVER ITS COMPETITORS USA DANIELS’ ADVANTAGES DANIELS’ ADVANTAGES OVER ITS COMPETITORS The Daniels Company always provides its clients with plant performance guarantees to design & supply the most efficient process circuit for each size fraction of raw coal to its clients. This generates maximum benefits to our clients at relative low cost. This has allowed The Daniels Company to survive from 1950s until present time while its competitors have disappeared. Historically, preparation plants designed and built by Daniels have met and exceeded on time, on budget and on performance required by the customers.

DANIELS’ ADVANTAGES OVER ITS COMPETITORS USA DANIELS’ ADVANTAGES DANIELS’ ADVANTAGES OVER ITS COMPETITORS The Daniels Company is experienced in the following various process circuits, which have been incorporated in its plants over a period of several years, in United States, Canada, Colombia and India. Coarse circuit (H.M. Vessel, H.M. cyclones, and Jig Small coal circuit (H.M. cyclones, W.O.C & combination) Fine coal circuit (2-stage W.O.C, W.O.C/Spiral combo, spiral, H.M.C) Ultrafine coal circuit (Conventional cells, column cells, Jameson cells, stack cells, floatair cells, jet-type flotation cells and etc.) 3-product HM cyclone technology from BGTG is most likely a good fit for processing India coals.

DANIELS’ ADVANTAGES OVER ITS COMPETITORS USA DANIELS’ ADVANTAGES DANIELS’ ADVANTAGES OVER ITS COMPETITORS The first Daniels H.M. Vessel was produced from The Daniels Company. Currently there are hundreds of Daniels H.M. Vessels operating in the whole world (China, Russia, Poland, India, Canada, USA, Indonesia, Mexico). The world largest H.M. Vessel, built by The Daniels, is currently operating in a Murray Energy plant in the USA. It has a feed capacity of 900 tph of coarse coal and 400 tph of reject material.

DANIELS’ ADVANTAGES OVER ITS COMPETITORS USA DANIELS’ ADVANTAGES DANIELS’ ADVANTAGES OVER ITS COMPETITORS The Daniels Company is the only company in USA who is designing and constructing CHPP and also manufacturing part or most of CHPP equipment, such as HM vessels, HM cyclones, vibrating screens, sieves, centrifugal dryers, flotation cells and etc. The Daniels Company’s staff always keeps up with the latest developments in coal processing and coal handling technologies.

GT GLOBAL Merging with BGTG Beijing GT Group The Daniels Company USA Merging with BGTG Beijing GT Group (China) The Daniels Company (USA) +550 Plants +180 Plants & Coal handling facilities GT GLOBAL

DANIELS’ ADVANTAGES OVER ITS COMPETITORS USA DANIELS’ ADVANTAGES DANIELS’ ADVANTAGES OVER ITS COMPETITORS After merging with Beijing Guohua Technology Group, The Daniels Company can now access manpower & equipment from combined resources. This enables The Daniels Company to offer competitive cost CHPP to its clients with high quality and efficient operations that can be managed by The Daniels Company. Utilizing the well recognized 3-product H.M. cyclone technology enables The Daniels Company to offer its clients with optional technology to further improve clean coal recovery. Currently about 1/3 of China washed coal is going through +550 coal plants built by BGTG. The 3-product HM cyclone is particularly suited to process Indian coals, which usually require high separation density (>1.8 kg/L). The 3-product cyclone can provide in one circuit and one-step the ability to produce both coking coal and thermal coal.

Coarse circuit: 100% H.M. process, no spiral & no RC High-efficiency to maximize valuable clean coal yield 3-product HM cyclone will produce 3 product at once High efficient flotation at many-years maintenance free Clean coal Raw coal 3-product H.M. cyclone Middlings sieve bend Clean coal sieve bend Circulating water Clean coal H.M. drain, rinse & classifying screen Fine coal H.M. cyclone Middlings H.M. draining Reject H.M . draining screen Reject Reject magnetic separator Centrifuge Middling magnetic separator magnetic Flow spilter Raw coal H.M. tank/pump Middlings Rejects Sieve bend Mixed into middlings To middlings H.M. Draining & classifying screen Screen-bowl centrifuge Filter cake Wash water Flocculant 1st stage thickener 2nd stage thickener Filter press Ca2+/Mg2+ionic agglomerate Flotation cells (1st stage) Clean fine sieve bend Screen-bowl centrifuge Filter press feed tank 2nd stage flotation feed tank Flotation feed tank Flotation cells Flotation concentrate Filtrate Fine coal H.M. tank/pump 15 Typical Coking Coal H.M. Cyclone Cleaning Process Flowsheet (Complete Circuit)

DANIELS’ ADVANTAGES USA Enable client to set up high density cut points up to 2.3 s.g. Accurately separate coal particles down to 0.25 mm Very simple design without using any other separators Raw coal 3-product H.M. cyclone Clean coal sieve bend Circulating water Clean coal H.M. D & R & classifying screen Reject D&R screen Reject Reject magnetic separator Clean coal magnetic separator Centrifuge Flow spilter Raw coal H.M. tank Clean coal clean fine sieve bend Rejects 1st stage thickener Fine coal H.M. tank Typical Thermal Coal H.M. Cyclone Cleaning Process Flowsheet (Coarse Circuit)

USA ADVANTAGES OF NEW HM PROCESS OVER TRADITIONAL PROCESS FOR INDIAN COKING COAL The new HM process with non-desliming significantly simplifies HM process using less equipment (without desliming screens, hydro-cyclone, spirals, TBS and etc.) and smaller plant space required, which results in lower capital investment Gravity-fed reduces secondary coal fines generation considerably Lower operating cost due to simple process, less equipment & much higher separation efficiency than traditional processes Using low single density HM suspension to achieve stable high separation density Higher clean coal yield due to higher separation efficiency compared to traditional HM process especially for high ash and difficulty-washing coal requiring high separation density

FOR INDIAN THERMAL COAL USA ADVANTAGES OF NEW HM PROCESS OVER TRADITIONAL PROCESS FOR INDIAN THERMAL COAL The new HM process with non-desliming also significantly simplifies HM process using less equipment Gravity-fed reduces secondary coal fines generation considerably Lower capital & operating cost due to simple process, less equipment & higher separation efficiency Using low single density HM suspension to achieve stable high separation density easily as high as 2.3 to produce high ash reject (pure rock).

ADVANTAGES OF NEW HM PROCESS OVER TRADITIONAL PROCESS USA ADVANTAGES OF NEW HM PROCESS OVER TRADITIONAL PROCESS 2. Gravity-fed reduces secondary coal fines generation considerably Industrial plant tests indicate: The secondary slime generated during washing process with gravity-fed H.M. cyclone is 5~7 percentage points (in total feed) less than that produced during process with pressurized feeding cyclone. This is very important and beneficial to the design of thermal coal plant. Test at Linhuan Plant: Difference of Amount of -0.5 mm Fines between Gravity-fed & Pump-fed Pump feed Gravity feed Difference Slurry Volume (m3/h) 700 Solid Content (g/L) 135 102 Amt of -0.5 mm (t/h) 94.5 71.4 32.4% ※ Each cyclone feed rate: 302 t/h

ADVANTAGES OF NEW HM PROCESS OVER TRADITIONAL PROCESS USA ADVANTAGES OF NEW HM PROCESS OVER TRADITIONAL PROCESS 3. Lower operating cost due to simpler process, less equipment, & much higher separation efficiency (higher centrifugal force and lower separation size limit) than traditional processes Higher centrifugal force: HM suspension feed pressure is double the traditional HM process (17 times of cyclone diameter instead of 8 times) Lower separation size limit: effectively separate coal particle size down to 0.25 mm in the 3-product cyclone and down to 0.1 mm in fine coal HM cyclone Coal Size Fraction Epm Value Throughput Capacity > 0.5 mm (I) 0.02-0.025 (II) 0.025-0.045 Up to 1300 t/h, 0.5~0.25 mm 0.099kg/L Up to 1300 t/h, 0.1~0.074 mm 0.08 kg/L No ultrafine magnetite needed

For Coking Coal ADVANTAGES OF NEW HM PROCESS OVER TRADITIONAL PROCESS USA ADVANTAGES OF NEW HM PROCESS OVER TRADITIONAL PROCESS 3. Lower operating cost due to simpler process, less equipment, & much higher separation efficiency (higher centrifugal force and lower separation size limit) than traditional processes For Coking Coal The Performance (Ep Values) of Spiral, TBS & HM Cyclone VS. Coal Size Reference: “Performance of the Teetered Bed Separator at the Murray Energy Century Preparation Plant”- Paper published in Coalprep 2009 Kentucky

ADVANTAGES OF NEW HM PROCESS OVER TRADITIONAL PROCESS USA ADVANTAGES OF NEW HM PROCESS OVER TRADITIONAL PROCESS 4. Using low single density HM suspension to achieve stable high separation density Vortex finder Apex

Characteristics of Indian Coal USA Characteristics of Indian Coal THERMAL COALS: Such as Mahanadi, Kusmunda, Adani, Piparwar & ETC

Characteristics of Indian Coal USA Characteristics of Indian Coal THERMAL COALS: Such as Mahanadi, Kusmunda, Adani, Piparwar & ETC

Characteristics of Indian Coal USA Characteristics of Indian Coal COKING COALS: DOHRI, DUGDA, DAHIBARI & ETC

EXAMPLES OF PREVIOUS PROJECTS USA EXAMPLES EXAMPLES OF PREVIOUS PROJECTS

PLANTS BUILT BY DANIELS USA PLANTS BUILT BY DANIELS Caretta Mineral Coal Preparation Plant (2015)

PLANTS BUILT BY DANIELS USA PLANTS BUILT BY DANIELS Caretta Mineral Coal Preparation Plant (2015)

PLANTS BUILT BY DANIELS USA PLANTS BUILT BY DANIELS

PLANTS BUILT BY DANIELS USA PLANTS BUILT BY DANIELS

PLANTS BUILT BY DANIELS USA PLANTS BUILT BY DANIELS

COAL HANDLING BUILT BY DANIELS USA COAL HANDLING BUILT BY DANIELS

PLANTS BUILT BY BGTG 12 MTPA Huainan Coal Preparation Plant by BGTG USA PLANTS BUILT BY BGTG 12 MTPA Huainan Coal Preparation Plant by BGTG

Shenhua Bayanner CHPP Project in Inner Mongolia China by BGTG PLANTS BUILT BY BGTG Shenhua Bayanner CHPP Project in Inner Mongolia China by BGTG

PROJECT DESIGN FOR INDIA CHPP USA PROJECT DESIGN FOR INDIA CHPP Properly selected & state of the art process technology will be used in the India projects to ensure maximizing clean coal recovery. Completely closed-circuit operation will be selected to recover all fines and tailings, which will result in: No tailings ponds Without any effluent discharged from plant to protect the environment

USA PROJECT MANAGEMENT FOR INDIA CHPP 2. Performance guarantee for the India CHPP designed and built by The Daniels Company.

PROJECT MANAGEMENT FOR INDIA CHPP USA PROJECT MANAGEMENT FOR INDIA CHPP 3. Provide world-class reliable coal preparation equipment for the ETT CHPP project: HM Washers from the world famous largest HM vessel supplier The Daniels Company USA H.M. Cyclones from the famous largest 3-product HM cyclone provider BGTG or acceptable outside suppliers Vibrating screens & vibrating centrifuges from the famous UK-based DVE or acceptable outside manufacturers Screen bowl centrifuges from the Decanter, Andritz or acceptable outside suppliers

4. Provide the best & most reliable after-sales service USA PROJECT MANAGEMENT FOR INDIA CHPP 4. Provide the best & most reliable after-sales service On-site warehouse of spare parts Periodical performance evaluation On-site technical service & consulting

PROJECT MANAGEMENT FOR INDIA CHPP USA PROJECT MANAGEMENT FOR INDIA CHPP 5. Can provide CHPP plant operation and/or CHPP plant management. On-site training will be provided when required.

PROJECT MANAGEMENT FOR INDIA CHPP USA PROJECT MANAGEMENT FOR INDIA CHPP The Daniels Company will provide General EPC contract services. CHPP plant construction and on-site construction management & installation will be subcontracted to our recognized reliable local Indian partner.

WHAT GT GLOBAL CAN OFFER USA WHAT GT GLOBAL CAN OFFER

THE DANIELS COMPANY (USA) A Member of GT Global Thank You ! USA