FIBER OPTIC VIDEO + DATA RT/COT PRODUCT SPECIFICATION EL – RVD1402 RT / COT VIDEO DATA 1 1 1 FCC DESCRIPTION This product can transmit image and control data between camera monitor or control keyboard and receiver box through 1core optical cable, capable of composing such various networks as Point To Point, Linear Add/Drop and Ring. It can make long-distance transmission with no relay and does not receive influence from electric or magnetic field by using optical characteristic. The user can check the data transmission and receiving visually through the input and output display LED. For the multi-channel equipment, image signal input and output voltage and the optical cable cut can be checked through 7Segment LED on the front panel. FEATURES -. High quality Image and Data transmission -. 10 bit Digital link -. RS-232C, RS-422, RS-485 Support -. Long-distance transmission with no-relay using the optical characteristics of optical communications (S/M : Maximum Transmission Distance 190Km) -. Image Signal Level Display & Built-in Optical Cable Cut Display Function -. Multiple Use of AC 110V / 220V -. Built-in 7Segment LED to display image input and output voltage display per channel (supporting NTSC, PAL, SECAM ) -. ECP Performance Certification, FCC, K Mark, Venture Business, INNOBIZ, GS, CE Certification -. Supporting Point to Point, Linear Add/Drop and Ring -. Supporting maximum 8 RT per 1 COT NMS ( option ) . Management Function -. Image Signal Number Value Display Function -. Optical Cable Cut Alarm Function -. Optical Equipment Abnormality Alarm Function -. Optical Equipment History Management Function APPLICATION .CCTV, ITV and traffic control System .CATV System .Security System .Process control and monitoring System ORDERING INFORMATION PART NUMBER DESCRIPTION MAX DISTANCE (Option) OPTICAL PWR BUDGET EL - RVD1202 RT / COT Ring V+D Transmitter EL - RVD1202 RT / COT Ring V+D Receiver 8dB 20Km SINGLE-MODE 9/125um EL RVD1402 RT / COT Ring V+D Transmitter EL - RVD1402 RT / COT Ring V+D Receiver 16dB 40Km

FIBER OPTIC VIDEO+DATA RT/COT EL – RVD1402 RT / COT SPECIFICATIONS CONNECTORS Video: BNC (Gold Plated Center-Pin) Data: Terminal Block with Screw Clamps, Type DB-9 Connector (RJ-45) Optical: ST or SC Connector ELECTRICAL & MECHANICAL Power: 12 VDC @ 1.2A Surface Mount: From Rack Number of Rack Slots: 12 Current Protection: Automatic Resettable Solid-State Current limiters Size( WxHxD ) 1u Rack Mount 483 x 44 x 330mm 6u Rack Mount 483 x 264 x 275mm ENVIRONMENTAL MTBF: > 100,000 hours Operating Temp: -40℃ to +74℃ Storage Temp: -40℃ to +85℃ Relative Humidity: 0% to 95% (non-condensing) VIDEO Video Input: 1 volt pk-pk ( 75 ohms ) Video Bandwidth: 10 Hz –6.5 MHz Differential Gain: <1% Differential Phase: <1˚ Tilt: <1% Signal-to-Noise Rate: >63dB DATA Data Interface: RS-232,RS-422, RS-485 with Tri-State Data Format: NRZ,RZI,Manchester, Bi-phase Data Rate: DC – 2Mbps(NRZ) Bit Error Ratio: < 1 in 10 E-9 Operating Mode: Simplex or Full-Duplex WAVELENGTH 1310/1550nm OPTICAL EMITTER Laser Diode NUMBER OF FIBER 1Core LED INDICATORS -. Video Transmitter/ Data Transceiver .Video input level display (7 segment) .RX, TX Data LED .Power LED -.Video Receiver/ Data Transceiver . Video output level display (7 segment) .Fiber optic cable status alarm

FIBER OPTIC VIDEO+DATA RT/COT EL – RVD1402 RT / COT ☞ 환형 망 구성 ( Ring ) West East COT RT # xch Video + xch Data ☞ Management system (N.M.S) . Graphical User Interface is used Network Management . Data Communication Status Display Function . Optical Cable Cut Alarm Function . Optical Equipment Abnormality Alarm Function . Optical Equipment History Management Function . Version Management of Equipment . Install Location Display Function of Equipment . Easy Install of System 3F, A-dong, 50, ELIM Building, sanupro 155beongil, Gwonseon-Gu, Suwon-si, Gyeonggi-Do, Korea(Goseck-dong, sanup 3dangi) ELIM Co., Ltd Tel : +82-31- 257- 7157 Fax : +82-31- 257-7159 e-mail:h0824@elimopt.co.kr http:/www.elimopt.co.kr