GlocalMe U2 Operation

Contents Introduction Step 1 Result of Step 1 Step 2 Step 3 Turning off.

Introduction Using the Glocalme U2 is simple. This simple guide assumes some prerequisites The unit is charged (use a USB charger and a micro-USB cable) You have set up an account and have some data. See instructions on the back of the unit.

Step1 Turn it on. Press and hold button until battery symbol appears.

Result of step 1 After a a few seconds: Powered on, found network and transmitting Wi-Fi. (Wi-Fi symbol will be solid).

Step 2. Ensure data roaming is off (Mobile data) Select Settings, WiFi on phone, iPad or other device. Select GlocalMe.

Step 3. Enter password on your device when prompted (This will probably happen only the first time). You can find the password here.

Turning off Turn it off. Press and hold button until four lights come on. They will quickly go off.)