Can You Tell the Difference? Good Weld vs Bad Weld

Can You Tell the Difference? Good Weld vs Bad Weld GOOD WELD BAD WELD Lack of Penetration

Can You Tell the Difference? Good Weld vs Bad Weld Plug Weld There’s really no visual ques to tell if a weld has been done properly.

Failed Destructive Testing Can You Tell the Difference? Good Weld vs Bad Weld Failed Destructive Testing NO TEAROUT When you destructively test a weld you can tell. The plug weld on the right failed destructive testing. There was no tearout. There should be a 5mm tearout in the center of the weld. How to set-up your welder, test and practice weld before you go to the vehicle and then perform proper welds that will keep consumers safe…all covered in Welding Training & Certification.

Three Welding Courses Available Steel GMA (MIG) Welding (WCS03) Students will learn how to properly set up, tune and maintain a welding machine. They’ll make common GMA (MIG) welds on multiple thicknesses of steel in the vertical and overhead positions, and learn how to perform proper welding techniques. Aluminum GMA (MIG) Welding (WCA03) Students will learn how to properly set up, tune and maintain a welding machine. They’ll learn the safety issues involved with aluminum welding as well as how to properly prepare metal surfaces, perform proper welding techniques, and identify and correct weld defects. Steel Sectioning (SPS05) Students will gain an understanding of the critical nature of sectioning procedures. They will learn to measure and work with tolerances, and how to verify whether a structural component on a vehicle can be replaced.

OEMs AND INSURERS WHO REQUIRE I-CAR WELDING © 2017 I-CAR