CHEKING CALCULATION OF TURBOMACHINERY IN ANSYS 27.05.2018 CHEKING CALCULATION OF TURBOMACHINERY IN ANSYS CFX USAGE OF MESH-GENERATOR ANSYS TURBOGRID and format-converter PROFILER special engineered at SSAU Shabliy Leonid Instructor of department Theory of Aircraft Engines Samara State Aerospace University SSAU 443086 Samara, Moskovskoe shosse 34, bild. 5, room 405 Ph.: (846)267-45-94; E-mail: afroaero@hotmail.ru Samara State Aerospace University

TURBOMACHINERY CALCULATION «FROM ZERO» CHEKING CALCULATION OF TURBOMACHINERY IN ANSYS 27.05.2018 TURBOMACHINERY CALCULATION «FROM ZERO» VISTA (CCD, CPD, etc.) INITIAL PROJECTING Base parameters of turbomachine: machine type, mass flow rate, pressure increase/decrease degree, desirable efficiency Geometry parameters of turbomachine: Inlet/Outlet Diameters, height of blades, blade angles at Inlet/Outlet, etc. BLADE MODELER 3D-PROFILING Geometry of blade row: shroud contour, hub contour, blade sections CFD-results Efficiency, mass flow rate pressure and temperature fields Mesh Model HEX-mesh for Ansys CFX TURBO GRID MESH GENERATION CFX CFD-CALCULATION Samara State Aerospace University

LET’S SEE CONVERTION PROCESS IN DETAILS CHEKING CALCULATION OF TURBOMACHINERY IN ANSYS 27.05.2018 BUT IF YOU NEED CHECKING CALCULATION WITH EXISTING TURBOMACHINE GEOMETRY? LET’S SEE CONVERTION PROCESS IN DETAILS Existing Turbo-machine Geometry: drawing or 3D-model with description of hub/shroud curves and blade sections SSAU PRODUCT ! ? PROFILER DATA CONVERTION TURBO GRID MESH GENERATION CFD-results Efficiency, mass flow rate pressure and temperature fields CFX CFD-CALCULATION Samara State Aerospace University

CHEKING CALCULATION OF TURBOMACHINERY IN ANSYS 27.05.2018 VANE GEOMETRY DATA: PROFILER DATA CONVERTION 1. INPUTS IN PROFILER FROM DRAWING MANUALLY 2. LOADS FROM DIFFERENT COORDINATE FILES AUTOMATICALLY Samara State Aerospace University

CHEKING CALCULATION OF TURBOMACHINERY IN ANSYS 27.05.2018 VANE GEOMETRY DATA: PROFILER DATA CONVERTION 1. CHECKING VISUALLY 2. CORRECTING 3. ORIENTING IN ENGINE COORDINATE SYSTEM 4. SAVING IN TURBOGRID FORMAT Samara State Aerospace University

CHEKING CALCULATION OF TURBOMACHINERY IN ANSYS 27.05.2018 GEOMETRY LOADS IN TURBOGRID TURBO GRID MESH GENERATION AND MESH FOR FLOW IS GENERATING Samara State Aerospace University

CHEKING CALCULATION OF TURBOMACHINERY IN ANSYS 27.05.2018 IN CFX-Turbomachinery CFX CFD-CALCULATION MESH LOADS AND MACHINE PARAMETERS SETS Samara State Aerospace University

CHEKING CALCULATION OF TURBOMACHINERY IN ANSYS 27.05.2018 IN CFX-POST ON PAGE “TURBO” POST-PROCESSING IS GOING CFX CFD-CALCULATION Samara State Aerospace University

27.05.2018 Thank you! CHEKING CALCULATION OF TURBOMACHINERY IN ANSYS CFX USAGE OF MESH-GENERATOR ANSYS TURBOGRID and format-converter PROFILER special engineered at SSAU Shabliy Leonid Instructor of department Theory of Aircraft Engines Samara State Aerospace University SSAU 443086 Samara, Moskovskoe shosse 34, bild. 5, room 405 Ph.: (846)267-45-94; E-mail: afroaero@hotmail.ru Samara State Aerospace University