Technology And Engineering GRAPHIC PRODUCTION Make a knife pounds / Real / print embossing GRA:PUR:13 Sumber buku : Mengemas hasil cetkan Penyusun : Agus Nugroho Editor : Endro Santoso HS

After learning of this study, it is expected that students can: Learning Objectives : After learning of this study, it is expected that students can: Making reference to the print job pon Making reference to the print job Real Making reference to the print job emboss Teknologi dan Rekayasa

INSTALLATION OF A KNIFE PON REFERENCE ON IMPRINT To be able to perforation on the printing machine reference perforation should be closed in a frame Reference perforation by the Training participants can be made with the perforation in the form of a square or in the form of holiday The distance (perforation) was measured with a ruler augustijn (read: Agustien) Teknologi dan Rekayasa

The Real TO Faulty Door With scratch dent / Real first fold will be a flat and sharp on the kind of - kind of cardboard that are difficult for the folded normal Teknologi dan Rekayasa

DEVELOPMENT FOR CHIP CLICHE EMBOSS ~ Reference for the print job consists of 2 steel plate or sheet of brass thick 16 s / d or 18 mm can be up to the letter (letter height Netherlands 66, 047 point = + 2, 476 Cm) ~ Because the relief that arises, then the print is also emboss relief print, also called relief printing and has another name that is printed blind, because they do not use the reel without ink or ink Teknologi dan Rekayasa

Female strereotype Print paper Male strereotype Female stereotype (stamp it) have a dent to the image made in the plate blade wood board that made the previous image is above board. Then the image slice be chiseled or so a reference to the print dent into the picture . Teknologi dan Rekayasa

~ With chunks parried improve chunks ~ With chunks parried improve chunks parried wood carving, carving through the fine then already prepared a reference print or female seals, which is one reference for the print job emboss ~ Next we will prepare opponents of prints or print reference female is also called the male as a reference in print Teknologi dan Rekayasa

~ Next to the adhesive containing a little water ~ Next to the adhesive containing a little water limping manila cardboard setebal + 1 / 2 mm, slightly larger in size than stempelnya on degel ~ Two of lime stone (gypsum) and three parts lime stirred, then mixed into the solution Gom arab stir, until mixture occurs as a fairly thick puree ~ Everything is then closed with paper and ultra brush little oil to prevent the pulp stick on the stamp Teknologi dan Rekayasa

~Closed on the female stereotype and frame printing pulp layer on the print with the pressure gradually from mild press print pressure gradually from mild pressure to the pressure is heavy. Teknologi dan Rekayasa