Wireless Relay HDL-MPR01-RF.18.

Slides:

Advertisements

Similar presentations

Log In with RF LCD Clickers Channel 65. Log In with your Clicker This is what the clicker looks like Here are the steps: 1.Click on CH button 2.The light.

Advertisements

…performance audio networks. ABOUT RockNet => RockNet provides ultra low latency and very high audio quality. Genuine Audio Technology  RockNet is a.

C3 confidentiality classificationIntegrated M2M Terminals Introduction Vodafone MachineLink 3G v1.0 1 Vodafone MachineLink 3G LED status display and operation.

MH 201, 203, 205 Classroom Technology University of Dayton Information Technology Classroom Support.

N105 Lindquist Center Documentation This document includes: 2 - Teacher Station Control Panel 3 - Student Table Controls 4 - Lighting Controls 5 - Faculty.

SB-CMS-PIR - ceiling mounted PIR sensor. Subnet ID and Device ID Device Remark Change the ID if needed.

The Headphones1 Trainer Training The Headphones. 2 There are three sets of headphones There are three transmitters Transmitters also act as battery chargers.

GCS 300 System Operation Application – Level 1.

DLP LCD PANEL Programming

Dimmer debugging Big dimmer （ hanging dimmer ） ◆ 12ch 10A professional Intelligent Dimmer ◆ 6ch 20A professional Intelligent Dimmer ◆ 6ch 10A professional.

IMetos Wireless sensor Networks. Definitions I : Radio WAP(W ireless A ccess P oint ) The WAP is the radio interface needed to command the iMetos3 radio.

Working “Control any electrical device with your T.V remote(any brand)” wizardelectronics.weebly.com.

User Interface – Switch Panel 6 Gang Switch Panel Configuration guide RS485 Terminal Fixing hole Bayonet Front ViewBack View.

DMX Controller SB-DN-512DMX.

HDL KNX System Introduction

Buspro Wireless Last update: April 10, HDL-MCIP-RF.10 Connections: Buspro, Ethernet, Buspro wireless Work Mode: Mesh mode or Bridge mode Wireless.

目录 12 in 1 Sensor Features ● PIR motion sensor ● Ultrasonic sensor ● LUX sensor ● Temperature sensor ● 2 Dry contacts ● 2 external condition inputs ● IR(infrared)

0-10V Ballast Dimmer HDL-MRDA HDL-MRDA channel 10A DC0 － 10V output module is a multifunction control module. It has 6 channel relay.

Multifunctional LCD Panel HDL-MPL8.48. LCD Panel Description The HDL-MPL8.48 series is a new generation of wall mounted switch, with a total of 8 metal.

Solutions for Hotel HDL-MHRCU.431.

目录 8 in 1 Sensor ◆ 8 in 1 Sensor Unique Features ● Built in PIR motion sensor and light intensity sensor ● Built in 2 Dry Input Ports ● Built in 32 Logics.

Curtain Controller SB-DN-2Motor. SB-DN-2Motot is a professional two curtains(shutters) controller. The curtain module can control the curtain by AC motor.

目录 SB-CMS-8in1 Features ● 1 PIR motion sensor ● 1 Lux sensor ● 2 Dry contact inputs ● 2 external condition inputs ● IR(infrared) receiver ● IR(infrared)

Lighting Design. What is the Differences between old and new Lighting system? Why we need smart home Lighting system?

Brief Instruction of VoCE main frame VoCE mounted Bluetooth module 1. Plug VoCE main frame into Bluetooth module. The red LED on main frame will be tuned.

Samantha Module Set up. Items required Samantha receiver NXT - named with your number(Can be done in the download Firmware section) Robot Battery Computer.

PLC programming Part 3: Problems with solutions. Topics  Every problem is devided into three parts:  Technology description contains the general properties.

DIGITAL AC BASED ON GSM TECHNOLOGY Presented By Ravi Shankar PrasadAzeem Ahmad Ashutosh DubeyAnkit Ankit kumarRahul kumar Akshay kumarAnkur kumar Electronics.

6 CH 5A LED Dimmer HDL-MDLED /2/2016 Description HDL-MDLED CH 5A Intelligent LED Dimming Module, it can be used to control the LED.

System Important Points for Wiring

DALI Scene Controller HDL-MC-DALI.431.

DALI Scene Controller HDL-MC-DALI.431.

DEVICE ORIENTATION ICT4D Session 2.

Wireless Power Interface

How to power down your NAS safely

Switches Electronics 1 CVHS.

Multifunctional Sensor

SB-DN-Logic960 Logic module.

6 CH 5A LED Dimmer HDL-MDLED

SMS module HDL-MGSM.431.

FLoor Heating Controller

Power meter SB-DN-PM1P03 SB-DN-PM3P02.

Dimmer 6fold 10V Actuator M/DA

Dry contact sensor HDL-MSD04.40 HDL-MSD08.40.

DMX Controller SB-DN-48DMX.

FLoor Heating Controller

Wireless 4 Buttons Touch Panel

IR Emitter module SB-IR-EM.

DMX512 Gateway M/DMX512.1.

Wireless 3 Buttons Touch Panel

MOSFET Dimmer Actuator

Wireless Relay HDL-MPR02-RF.18.

Chapter 5: Switch Configuration

Integration Bacnet Server HDL-BN-4096.

MPU-16A / FPU-16 TEST UNIT TUTORIAL

Dry contact sensor HDL-MSD04.40 HDL-MSD08.40.

Curtain Motor HDL-MWM70B.12 HDL-MVSM45B.12.

Chapter 2: Introduction to Switched Networks

Chapter 2: Introduction to Switched Networks

Call to Fix Canon Pixma MX340 printer Error 5200

Chapter 5: Switch Configuration

Instruction Manual Specifications Features： Dimension：38*16*6 mm

Raspberry Pi: External Inputs & Outputs

Setup 1; Add iMCB. Set up : Please check circuit and follow proper wiring before power up.

Oscilloscopes HP 54600B Digital Oscilloscope Alex Jones COE 0501.

Technisonic Industries TDFM-136

LEGO Education - Mindstorms EV3 - Computer/control center – The Brick

Main Unit Establishment

724 Temperature Calibrator

How to install a WISE-4051 Device Presented By: Mark Brown

Presentation transcript:

Wireless Relay HDL-MPR01-RF.18

Description HDL-MPR01-RF.18 Wireless Relay, has 4CH dry contact, can control target by switch. This module should be configured by wireless gateway.

Connection 1. Press the ‘PROG’ button 3 times continuously within 3s in the Wireless Gateway, the LED of the Wireless Gateway will flash quickly in red, indicating it is ready to broadcast its Wireless parameters (Frequency & Password) to the Wireless Dimmer. 2. Programming button: if it is working fine, the green light will flicker, press the button three times continuously within 3s, and then the LED will flash quickly. 3. The LED of Wireless Relay will be off automatically, and then, press ‘PROG’ button of Wireless Gateway again.

Channel Name: Do the Remark for easy management. Open delay: When receives the on command, will not switch on immediately but after the delay time. Close delay: When receives the off command, will not switch off immediately but after the delay time. Protect delay: If a protection delay of 1 minute is set, and the relay channel is turned off, it cannot be turned on again until 1 minute later. This is useful for loads which are not suitable to be rapidly turned on and off. 5/28/2018

Configuration Device ID Control type Channel and level You can use the panel to control the wireless relay channel.

Dry Contact The Wireless Dimmer has 4 channels dry contact.

Dry Contact Switch type: Two different Switch types - Momentary and Toggle a) Momentary Switch - When pressed, it is on, when released, it is off. Generally select ‘signal on; signal on/off; combination on/off; etc..’ b) Toggle Switch – It is bi-stable switch, you can set it on or off. Generally select “Mechanic switch” mode for this kind of switch. a) b)

Dry Contact Setting: Set the dimming mode for each channel. Dimming: Set the dimming value for each channel: 5/28/2018

Dry Contact Setting for keys: Enable/disable: enable/disable the input channels. Enable lock: If be selected, can use panel to lock/unlock this channel. . 5/28/2018

Dry Contact Target: Can set each channel’s targets. 5/28/2018