Technology Building-Smart Class Audio Visual Training

Smart Class Equipment Smart Class LCD Projector/Built In Screen Control Panel Credenza (DVD/VCR & P.C. inside)

Smart Class Turning on A/v System Use the key provided to you by your department head to unlock the credenza.

*Make sure Master Switch is on inside the credenza. Smart Class Turning on A/v System *Make sure Master Switch is on inside the credenza. *Master Switch will light up red if it is in the ON position. Master Switch should never be turned off.

Smart Class Turning on A/v System Press the “ON” button located on the bottom right hand side of the control panel and the projector will begin turning on.

Smart Class Turning on A/v System Please note, if you’re touch pad is not working, there will be a remote inside the credenza. The green button on all remotes will turn on your projector.

Smart Class Turning on A/v System Press the “ON” button located in the center of the computer to turn it on. Pull out mouse and keyboard from drawer above the P.C. You’ll find the monitor built into the Credenza above the keyboard.

Or press button labeled “Input A” or “Input 1”. Smart Class Projecting a COmputer To display the computer, press the “Input” button on the control panel until the projector reads “Input A” on the top corner of the screen. *If using a remote, press “INPUT” button until you see “INPUT A” on the screen. Or press button labeled “Input A” or “Input 1”.

Smart Class Projecting a computer To adjust the volume coming from your *computer press the “VOL +” and “VOL -” buttons on the control panel. *Please note, volume must also be turned up on your P.C. to receive sound.

Smart Class Projecting a DVD To play a DVD or VHS open the compartment on the right hand side of the credenza and pull out the DVD/VCR combo player located inside.

Smart Class Projecting a DVD To play a DVD, turn on your DVD/VCR combo player by pressing the “Power” button on the bottom left hand corner of the player.

Smart Class Projecting a DVD Press the Eject button next to the DVD player to open it. Place DVD in player with label up. Push the Eject button again to close and load the DVD player.

Or press button labeled “VIDEO” or “Input 3”. Smart Class Projecting a DVD Press the “DVD” button on the control panel to have projector display the DVD player. If there is no “DVD” button press the “INPUT” button until the projector displays the word “VIDEO” on the top corner of the screen. *If using a remote, press “INPUT” button until you see “VIDEO” on the screen. Or press button labeled “VIDEO” or “Input 3”.

Projecting a DVD There are 3 ways to control your DVD: Smart Class Projecting a DVD There are 3 ways to control your DVD: Use control buttons located on the control panel. 2. Use control buttons located on the DVD player itself. 3.Use the remote control located in the compartment with the player.

Playing a DVD To adjust the volume coming from the DVD press the Smart Class Playing a DVD To adjust the volume coming from the DVD press the “VOL +” and “VOL -” buttons on the control panel.

Press the “Eject” button to retrieve your DVD. Smart Class Playing a DVD To stop the DVD press the STOP button located on the bottom left hand corner of the DVD player. Press the “Eject” button to retrieve your DVD.

Smart Class Projecting a VHS To play a VHS, turn on your DVD/VCR combo player by pressing the “Power” button on the bottom left hand corner of the player.

Put your VHS tape into the slot on the right hand side of the player. Smart Class Projecting a VHS Put your VHS tape into the slot on the right hand side of the player.

Or press button labeled “VIDEO” or “Input 3”. Smart Class Projecting a VHS Press the “VCR” button on the control panel to have projector display the VHS tape. If there is no “VCR” button, press the “INPUT” button until the projector reads “VIDEO” on the top corner of the screen. *If using a remote, press “INPUT” button until you see “VIDEO” on the screen. Or press button labeled “VIDEO” or “Input 3”.

Projecting a VHS There are 3 ways to control your VHS: Smart Class Projecting a VHS There are 3 ways to control your VHS: Use control buttons located on control panel. 2. Use control buttons located on the VCR player itself 3.Use the remote control, located in the compartment with the DVD/VCR.

Projecting a VHS To adjust the volume coming from the VHS press the Smart Class Projecting a VHS To adjust the volume coming from the VHS press the “VOL +” and “VOL –” buttons on the control panel.

Press the “Eject” button to retrieve your VHS. Smart Class Projecting a VHS To stop the VHS press the STOP button located on the bottom left hand corner of the VCR. Press the “Eject” button to retrieve your VHS.

Turning oFF the A/v System Smart Class Turning oFF the A/v System To turn off the A/V System press the “OFF” button located on the control panel twice. *If using a remote, press green “Power” button twice, or press “Off” Button twice.

Turning oFF the A/v System Smart Class Turning oFF the A/v System Turn off the P.C. and DVD /VCR player and you have completed shutting down the A/V system. Please place back all items removed from the credenza. (remotes, mouse/keyboard, etc.)

Smart Class Turning OFF A/v System Use the key provided to you by your department head to lock the credenza.

This presentation was created by Katherine Roba Smart Class Audio Visual Contact info Office Phone: Ext. 76120 Office Email: avt@kean.edu Office Location: Technology Building Room 110 Office Website: http://www.kean.edu/~avt/ This presentation was created by Katherine Roba kroba@kean.edu ~ 908 737 6122