TATVA INSTITUTES OF TECHNOLOGICAL STUDIES,MODASA PRESENTATION ON Introduction to Optoelectronics Optical storage ENROLL NO - 140903111001_2151101

Storages Old storage: stones, paper, films, photographs, record Advanced storage Audio/Video use Analog: audio cassette, video tape Digital: CD, MD, Digital video tape, DVD, HD Computer use Magnetic: MT, FD, HD Optical: CD-ROM, CD-R, CD-RW, MO, DVD-ROM, DVD-R, DVD-RW Semiconductor: Flash memory (USB memory)

Old storages Woods, Bamboo Stone: example Rosetta Stone Paper: books, notebooks, etc. Films: movies, photographs

Magnetic Tape (MT) Tape recorder

Magnetic recording History Magnetic tape and magnetic disk Recording media and recording head GMR head for high density Magneto-optical recording Hybrid magnetic recording Solid state nonvolatile magnetic memory (MRAM)

History of magnetic recording 1898 V. Poulsen (Denmark) invented wire recorder; Information storage technology by control of magnetic state. 1900 The magnetic recorder was exhibited at the Paris EXPO and was praised as “the most interesting invention of recent years”. Invention of vacuum tube amplifier by L. De Forest (USA) in1921, together with development of the ring-type magnetic head and the fine magnetic powder applied tape bring about practical magnetic recorder.

Recording process Recording current time moving direction of recording media Recorded wavelength K. Sato ed., Applied Materials Science (Ohm publishing) Fig. 5.18

Recording process Signal current is applied to a coil in the magnetic head which is placed close to the recording medium to generate the magnetic flux, the intensity and direction of which is proportional to the signal. The medium is magnetized by the magnetic flux from the head, leading to formation of magnetic domain corresponding to the intensity and polarity of the signal. Recorded wavelength （the length of recorded domain corresponding to one period of the signal) is calculated by =v/f where v is the relative velocity between head and medium, and f the signal frequency)

Read out of recorded signal（1） Inductive head Electromagnetic induction Electric voltage proportional to the derivative of the magnetic flux is generated Output has the differential form of the recorded signal The readout voltage is proportional to the product of the recorded wavelength and relative velocity between the head and the medium. Spacing loss Principle of read-out induction Running direction K. Sato ed., Applied Materials Science (Ohm publishing) Fig. 5.19, 5.20

Read out of recorded signal（2） MR (magneto-resistance) head Change of the electric resistance of the head by the magnetic flux from the medium is utilized. AMR (anisotropic magneto-resistance) was utilized in the early stage and was replaced to GMR (giant magneto-resistance). N S leakage flux MR head

Magnetization curve and GMR F1 F2 F1 F2 F1 F2 H M R HC1 HC2 F1 F2 F1 F2 If F1 and F2 have different Hc then high resistivity state is realized for H between Hc1 and Hc2 Resistance is high for anti-parllel configuration

What is GMR? Ferromag(F１)/Nonmag(N)/Ferromag(F2) multilayer Small resistance for parallel spin direction of F1 and F2, while high resistance for antiparallel direction. Pinned layer Free layer

Spin valve NiFe(free)/Cu/NiFe(pinned)/AF(FeMn) uncoupled sandwich structure Free layer Nonmagnetoc layer Exchange bias Pinned layer Antiferromagnetic (例 FeMn) Synthetic antiferro

Head clearance

Thank You