INDENTIFYING BODY PANEL/KOMPONEN TO BE REPAIRED REPAIRING BODY PANELS INDENTIFYING BODY PANEL/KOMPONEN TO BE REPAIRED BODY OTOMOTIF (F-022) SK – KD 03

TARGET OF LEARNING ACTIVITY Educative participant can mention the Parts of Panel Vehicle. Educative participant can mention components in panel of body vehicle. Educative participant comprehend function of panel Vehicle Teknologi dan Rekayasa

1. External Construction 2. Internal Construction KONSTRUKSI BODI KENDARAAN 1. External Construction 4. Engine Hood 7. Roof 9. Doors 2. Internal Construction 5. Fender 8. Behind bodi 10. Deck Lid 3. Floor 6. Cowl and Dash Panel Quarter Panel 11. Teknologi dan Rekayasa

EXTERNAL CONSTRUCTION This area consist of some linked up panels with some extension type and earn seen directly from outside Teknologi dan Rekayasa

EXTERNAL CONSTRUCTION Teknologi dan Rekayasa

INTERNAL CONSTRUCTION This area consist of existing components in vehicle bodi, panels to be used to strengthen vehicle body Teknologi dan Rekayasa

INTERNAL CONSTRUCTION Teknologi dan Rekayasa

FLOOR Floor usually consist of some small component which welded together to become one unit. At composite type usually flatten and separate with chassis, while integral type make rigid with chassis and usually scraggly Teknologi dan Rekayasa

FLOOR Teknologi dan Rekayasa

ENGINE HOOD Engine hood is part of vehicle body which covered engine Teknologi dan Rekayasa

ENGINE HOOD Teknologi dan Rekayasa

TIPE ENGINE HOOD Teknologi dan Rekayasa 1 Union type, while engine hood installation straitened by bolt 2 Piano type, engine hood installation use hasp by the side of and middle 3 One-piece type, engine hood hasp put front and behind Teknologi dan Rekayasa

TYPE OF ENGINE HOOD INSTALATION REAR OPENING TYPE FRONT OPENING TYPE Teknologi dan Rekayasa

FENDER Fender or wing is vehicle component which closing over wheels. In general fender divided to become 2 kinds of, front Fender and behind fender Teknologi dan Rekayasa

FENDER Teknologi dan Rekayasa

COWL AND DASH PANEL Cowl is a panel in front of vehicle as separate between engine and cabin usually make from union some small panel Teknologi dan Rekayasa

COWL AND DASH PANEL Teknologi dan Rekayasa

ROOF Most of roof have lasing from regular traverse flimsy plate. This lasing usually linked up by welded and represent shares for hold strands for the installation of roof head lining Teknologi dan Rekayasa

ROOF Teknologi dan Rekayasa

QUARTER PANEL This component usually union with wing behind, and have external and internal construction. External construction bend and linked up with internal construction with bolt and weld Teknologi dan Rekayasa

MIDDLE PILLAR Middle pillar represent prop up of middle shares and from other side roof. therefore, this construction shall strength. middle pillar also have function as seat door hasp Teknologi dan Rekayasa

PINTU-PINTU Teknologi dan Rekayasa

DECK LID Deck lid is door component as way out enter located goods behind vehicle. This component also consist 2 especial panel, that is external and internal panel Teknologi dan Rekayasa

DECK LID Teknologi dan Rekayasa