CIS 212 Microcomputer Architecture Day 22 Rhys Eric Rosholt Office: Office Phone: Web Site: Email Address: Gillet Hall - Room 304 718-960-8663 http://comet.lehman.cuny.edu/rosholt/ rhys.rosholt @ lehman.cuny.edu

Chapter 9 Computer Networks

Chapter 9 Computer Networks Chapter Outline Network Topology Addressing and Routing Media Access Control Network Hardware OSI Network Layers TCP/IP Focus – Voice over IP Network Standards Focus - Ethernet Focus - Upgrading Network Capacity (Part II)

Chapter Goals Compare and contrast bus, ring, and star network topologies Describe packet routing across local and wide area networks Describe the CSMA/CD media access control protocol Describe network hardware devices, including network interface units, routers, and switches Describe the OSI network model, the TCP/IP protocol suite, and IEEE network standards

Chapter 9 Computer Networks

Network Topology Spatial organization of network devices, physical routing of network cabling, and flow of messages from one network node to another Can be physical or logical Three types – star, bus, ring – differentiated by Length and routing of network cable Type of node connections Data transfer performance Susceptibility of network to failure

Point-to-Point Network Topology Impractical for all but very small networks

Point-to-Point Network Topology Impractical for all but very small networks

Point-to-Point Network Topology Impractical for all but very small networks

Advanced Network Topologies Improve practicality for most networks

Store and Forward System Centralizes the work of networking

Network Topologies Star Uses a central node to which all end nodes are connected Relatively simple wiring Bus Connects each end node to a common transmission line Low susceptibility to failure Ring Connects each end node to two other end nodes Long maximum network length Low susceptibility to noise and distortion Susceptible to failure and difficulty in adding, removing, or moving nodes

Star Topology Uses a central node to which all end nodes are connected Relatively simple wiring

to a common transmission line Bus Topology Connects each end node to a common transmission line Low susceptibility to failure Relatively simple wiring

Long maximum network length Low susceptibility to noise Ring Topology Connects each end node to two other end nodes Long maximum network length Susceptible to failure and difficulty in adding, removing, or moving nodes Low susceptibility to noise and distortion

Physical Star / Logical Bus Topology and another for message routing. The strengths of two different topologies can be combined by using one topology for physical layout and another for message routing.

Addressing and Routing How messages sent by end nodes find their way through transmission lines and central nodes to their ultimate destination Local area networks (LANs) Interconnected to form WANs Wide area networks (WANs)

Local Area Network Routing Each central node maintains and uses a routing table to make routing decisions LAN hub or switch usually handles packet routing Logical network topology determines exact procedure for routing a message between two end nodes in the same LAN

Example of a WAN Includes end nodes LANs zone networks backbone central nodes

LAN Central Node Routing Decisions

Wide Area Network Routing Packet routing uses a store and forward approach Forwarding stations can be implemented using Bridges Routers Switches

Media Access Control Uses a protocol that specifies rules for accessing a shared transmission medium Carrier Sense Multiple Access/Collision Detection (CSMA/CD) Commonly used in bus networks to detect and recover from collisions Token passing MAC protocol Used by ring network topologies

CSMA/CD Protocol Process Listen and wait for an idle state Transmit a packet Listen for a collision If a collision is detected First wait for a random period of time Then retransmit the same packet Primary Advantage Simplicity Primary Disadvantage Potentially inefficient use of data transfer capacity

Token Passing MAC Protocol Token passes from node to node in a predetermined order includes all nodes on network in a specified time interval Only the node that “possesses” the token is allowed to transmit messages All others can only receive and repeat messages No longer used in LANs; rarely in WANs

Effect of CSMA/CD Protocol on Network Throughput

Network Hardware Devices

Network Interface Units (NIUs) Interface between network node and network transmission medium Scan destination address of all packets In bus network ignores packets not addressed to it In ring network retransmits all packets not addressed to it Implement media access control functions

Hubs Connect nodes to form a LAN Most are Ethernet devices Combine separate point-to-point connections between nodes and the hub into a single shared transmission medium by repeating all incoming packets to every connection point Low-cost alternative for home and small office networks

Bridges Connect two networks or network segments and copy packets between them Look at source addresses and update internal tables of node addresses on each network segment Common uses Construct a virtual LAN from two separate LANs Divide a network into segments in order to minimize congestion

Routers Intelligently route and forward packets among two or more networks Forward packets based on information other than destination address Build internal “map” of the network constantly scan the netework to monitor traffic patterns and network node changes

Switches High-speed devices that create virtual LANs on a per-packet basis Each input connection is treated as a separate LAN Dramatically increase network performance Connection decisions made by hardware are based only on destination address Each virtual LAN has only one sending and one receiving node eliminates congestion

Open System Interconnection (OSI) model OSI Network Layers Open System Interconnection (OSI) model ISO conceptual model that divides network architecture into seven layers Each layer uses services of layer below and is unaware of other layer’s implementations Uses: General model of networks Framework for comparing networks Architectural roadmap that enhances interoperability among network architectures and products

OSI Network Model

Application Layer Network service request and response Contains programs that make and respond to high-level requests for network services End-user network utilities Network services embedded in the OS Network service providers

Presentation Layer Converts and formats data Ensures correct interpretation of transmitted data Encryption and decryption Compression and decompression Converting data between EBCDIC and ASCII Font substitution Primarily used by applications that format data for user display

Session Layer Negotiates and implements high-level protocol parameters timeout half or full duplex synchronization quality of service Establishes and manages communication sessions Monitors communication to detect and resolve problems that arise once protocol has been established

Transport Layer Formats messages into packets suitable for transmission over the network Places messages within a packet data area and adds header/trailer information (network addresses, error detection data, packet sequencing data) Gives packets to network layer for delivery Examines packets for errors; requests retransmission if necessary (when receiving packets)

Network Layer Routes packets to their proper destination Those within central node interact with one another to exchange routing information and update internal routing tables

Data Link Layer Transmits packets and bits Interface between network software and hardware

Physical Layer Transmits bit streams Where communication between devices actually takes place Includes hardware devices that encode and decode bit streams and the transmission lines that transport them

OSI Network Model

OSI Network Model

TCP/IP The core Internet protocol suite Delivers most services associated with the Internet File transfer via FTP Remote login via Telnet protocol Electronic mail distribution via SMTP Access to Web pages via HTTP Predates and corresponds poorly to OSI model

IP Internet Protocol Provides connectionless packet transport across LANs and WANs Translates datagrams into format suitable for transport by physical network IP layer can divide datagram into smaller units and transmit them individually Attaches header information to each unit, including its sequence in the datagram

IP Internet Protocol Assumes datagram will traverse multiple networks via nodes called gateways Determines transmission routes via related protocols (ICMP, RIP) IP nodes Identified by unique 32-bit address (nnn.nnn.nnn.nnn) Periodically exchange routing information to keep tables current

Only the IP layer is implemented within the gateways

TCP Transmission Control Protocol Provides connection-oriented packet transport to higher-level Internet service protocols, including HTTP, FTP, and Telnet Provides framework to check for lost messages; explicitly establishes connection with intended recipient before transmitting messages Performs connection management functions (verifying receipt, verifying data integrity, controlling message flow, securing message content)

TCP Transmission Control Protocol Sender and recipient TCP layers maintain information about one another (message routes, errors encountered, transmission delays, status of ongoing data transfers) Uses positive acknowledgment protocol to ensure data delivery Establishes connections through a port and an socket

VoIP Voice over IP Technologies/standards that carry voice messages and data over single packet-switched network Lower cost than traditional public switched telephone network (PSTN) Complex and competing standards Transmission quality problems packet loss latency jitter

for many component protocols H.323 is an umbrella for many component protocols

Network Standards IEEE 802 standards Describe network hardware, transmission media, transmission methods, and protocols Help ensure compatibility among products from competing vendors Developed by committees whose membership is drawn from industry, government, and academia Ethernet standard (802.3) - very successful

IEEE 802 Network Standards

No provision for packet priorities or guarantees of quality of service Ethernet No provision for packet priorities or guarantees of quality of service

10 Gigabit Ethernet

Business Focus – Upgrading Network and Storage Capacity Bradley Advertising Agency The trade-off between short and long-range benefits of copper and fiber optic wiring Copper is installed in most buildings, works well for current needs, and can be upgraded Current technology pushes copper to its maximum Fiber optic cable has far greater theoretical capacity than copper Current optical products are expensive and not yet perfected Fiber optic cable is the future But when is it cost effective for a particular organization or need?

Summary Network topology Addressing and routing Media access control Network hardware OSI network layers Network standards

Chapter Goals Compare and contrast bus, ring, and star network topologies Describe packet routing across local and wide area networks Describe the CSMA/CD media access control protocol Describe network hardware devices, including network interface units, routers, and switches Describe the OSI network model, the TCP/IP protocol suite, and IEEE network standards

Next Class Thursday April 26, 2012 Rhys Eric Rosholt Office: Office Phone: Web Site: Email Address: Gillet Hall - Room 304 718-960-8663 http://comet.lehman.cuny.edu/rosholt/ rhys.rosholt @ lehman.cuny.edu