SINUMERIK Integrate Access MyMachine /OPC UA

Introduction Why a new architecture? What is OPC UA? The Unified Architecture (UA) is THE next generation OPC standard that provides a cohesive, secure and reliable cross platform framework for access to real time and historical data and events. Why a new architecture? The existing OPC COM based specifications have served the OPC Community well over the past 10 years, but as technology moves on so must our interoperability standards. Here are the factors that influenced the decision to create a new architecture: Microsoft has deemphasized COM in favor of cross-platform capable Web Services and SOA (Service Oriented Architecture) OPC Vendors want a single set of services to expose the OPC data models (DA, A&E, HDA ...) OPC Vendors want to implement OPC on non-Microsoft systems, including embedded devices Other collaborating organizations need a reliable, efficient way to move higher level structured data www.opcfoundation.org

Introduction Vendor Information Model Information Model Specifications Functionality Data Access (DA) Alarm & Events (A&E) Historical Data Access (HDA) Commands (CMDs) Protocols Binary protocol URL: opc.tcp://Server, TCP-Port 4840 Webservice (SOAP) URL: http://Server, Ports 80 (http) and 443 (https) Vendor Information Model Information Model Specifications IEC, ISA, OAGi, EDDL… DA A&E HDA CMDs OPC Information Model OPC UA Base Services All Necessary Services

SINUMERIK OPC UA Functionality Protocols Schedule Target Systems Data Access (DA) Alarm & Events (A&E) Protocols Binary protocol URL: opc.tcp://Server, TCP-Port 4840 Schedule Data Access (DA) 4.5 SP3 / 4.7 Alarm & Events (A&E) planned Target Systems 828D 840D sl

SINUMERIK OPC UA - Scenarios OPC UA Client OPC UA Client SINUMERIK Operate min. 4.5 SP3 PCU 50 SINUMERIK Operate min. 4.5 SP3 OPC UA Server PCU 50 OPC UA Server SINUMERIK Operate SINUMERIK Operate OPC UA Server OPC UA Server 840D sl min. 4.5 SP3 840D sl min. 4.5 SP3 840D sl min. 4.5 SP3 828D min. 4.5 SP3

SINUMERIK OPC UA – Data Access Functionality Read / Write NC / PLC data Subscribe NC / PLC datavalue changes 828D max. 20 subscriptions 840D sl max. 200 subscriptions Data PLC NC GUD (4.7) Not accessible Drive data

SINUMERIK OPC UA – Licensing 6FC5800-0AP67-0YB0 Access MyMachine /OPC UA

OPC UA – Client OPC UA Client Frameworks Selection and usage is in the responsibility of machine tool builder or end customer Development support is not provided by Siemens Frameworks Professional development OPC foundation www.opcfoundation.org 3rd Party Test, knowhow build up Automation Support (Programming an OPC UA .NET Client with C# for the SIMATIC NET OPC UA Server) http://support.automation.siemens.com/WW/view/en/42014088

Thank you for your attention! Bernhard Feurer RC-DE I CS SDW PRS2 Weissacher Str. 11 70499 Stuttgart Phone: 0711 / 137 2833 E-Mail: bernhard.feurer@siemens.com siemens.com/answers