Spring Briefing 2007

What Is DIGITAL VIDEO MANAGEMENT FOR IP, DVR OR HYBRID SYSTEMS Fully scalable networked video surveillance solution based upon ViconNet software Allows for complete interoperability between all devices connected to the network Operates using the standard Windows XP platform Engineered and owned by Vicon

ViconNet Campus Architecture

ViconNet Enterprise Architecture Site One Site Three WAN Site Two

Building on A Good Thing Version 4 of Our Software Platform Dual FPS Control Playback from Alarm Report Alarm Popup Controls Manual Limit Recording Time Selectable Camera Title Size Email or Text Message Alarm Events Centralized Software Upgrades

Virtual Matrix Control Display any camera on the network on any monitor on the network. Display any camera on the network on a dedicated monitor Allow the use of both analog and VGA monitors Allow controlling the system from either PC GUI or a CCTV keypad

Display and Monitor Control Look and Feel Several monitors allow flexibility of the display layout (cameras). Monitors can be analog or digital.

ViconNet V-Matrix Components Virtual Matrix Workstation (VMW) software New software, running on a dedicated PC Includes a special GUI to show the monitors and control the camera switching Supports 1 CCTV keypad per PC Receiver (KRX-3) KTX-4 size unit (TI DSP, PoE) 3 analog/2 VGA/2 S-video outputs Decodes ViconNet IP to analog/VGA/S-video 3 monitor outputs per receiver, single or quad view

Keypad Control ViconNet matrix keypad connected to the VMW through RS232 (using an adapter) Control PTZ functions Control camera switching to monitor Control quick playback to monitor Switching commands are based on the existing Vicon commands with some additions to allow playback and view control

KRX-3 Back Panel Output 1 Output 3 Output 2

ViconNet Video Capturing and Recording Kollector DVRs 301T and KTX-4 Encoders SVFT, 755IP, V910IP Cameras NVRs Nucleus VMW KRX-3 Monitors Virtual Matrix users Network PC users VN100 VN500 VN1000

VM Controller Building Blocks Keypad (optional) License for the number of controlled monitors VMW software PC running Windows XP

Functionality Of VM GUI Camera and monitor control Set monitor layout Switch a camera to a monitor Change view on monitor to quad Start quick playback for camera on a monitor (probably a fixed no. of seconds) PTZ control (with presets and Auto Pan ) System control Allow sending text to the monitor (from VMW) Acknowledge alarms Run macros on the monitors