One Point Perspective By Paula Sadler All the elements of one-point perspective are concretely realized in this engraving by Albrecht Dürer. The paper on which the picture is to be drawn swings out of the way. The string, kept taut by a weight, is led from the hook (the eye of the ideal observer) to a point on the object being portrayed. Presumably a vertical and a horizontal thread are slid so as to record the point at which the string crosses the picture plane. Then the string is relaxed, the drawing swings back, and that point is marked on the paper. This image (itself drawn in one-point perspective) gives a visual explanation of the principle and should not, I believe, be interpreted as a snapshot of an actual procedure. By Paula Sadler

what are we learning? A brief history of one point perspective Vocabulary Horizon line Vanishing point Vertical, horizontal, and orthogonal lines How to start creating a drawing with one point perspective Final projects Day 1 – Street practice Day 2 – Buildings to Sky Day 3 - Room

The first signs of One Point Perspective Florentine sculptor and architect, Fillipo Brunelleschi, was the first architect to use mathematical perspective in creating designs for buildings during the early Renaissance.

History (cont.) Before one point perspective, artists had to guess where the lines of buildings would go in their drawings. These drawings tended to look skewed and awkward.

Examples Before one point perspective, this image of Saint Florus on the left shows the figures in an awkward pose. It’s almost as if they are about to fall out of their seats. The image on the right, created by the artist Pieter de Hooch is very grounded. It looks like you can walk right through the door. Before After

Vocabulary Horizon line: where the sky meets the ground, a horizontal line Vanishing point: the place where all lines meet or “vanish,” it is located on the horizon line

Vocabulary (cont.) Horizontal line: a line that goes left to right, it is parallel to the horizon line Vertical line: a line that goes up and down, it is perpendicular to the horizon line Orthogonal line: lines that create the sides of an object in one point perspective, these lines are drawn to the vanishing point

LET’S GET STARTED! Draw a horizon line across your paper Put the vanishing point on the horizon line

Draw a square or rectangle on the left side of your paper below the horizon line

Create the orthogonal lines by connecting three corners of your square or rectangle to the vanishing point

Draw a horizontal line to create the top of your form

Draw a vertical line to create the side of your form

Erase your remaining orthogonal lines

Now for windows and doors! The windows and doors on the front of the building are made with horizontal and vertical lines The windows and doors on the side of the building will be made with vertical and orthogonal lines

Draw a window and door on the front of your building by using only vertical and horizontal lines.

Draw a door on the side of your building by first drawing a vertical line and connecting the top of it to the vanishing point.

End the door with another vertical line and erase the remaining orthogonal line.

Add a window the same way Add a window the same way. Start with a vertical line and now connect the top AND bottom to the vanishing point.

End it with a vertical line and erase the remaining orthogonal lines.

Start drawing more buildings down the side of your street!

Begin the right side of your street!

EXPERIMENT! HAVE FUN BEING CREATIVE!

Day 1 – Street practice

Day 2 – Buildings to sky We will be creating one point perspective cityscape from an ant’s perspective. We will be coloring your finished project.

Start by drawing your vanishing point in the middle of the top of your paper. All lines go to this point. Next, begin drawing your buildings. You do this by creating long cubes that go towards the center (vanishing point). The sides of the buildings can be colored in a solid black because that is the shadowed side. Make sure that it is always the same side on each cube.

Color in the background with alternating colors.

Now its time to add windows to the buildings.

Color in the squares you want for windows.

Finished Product!

Day 3 – draw your room To begin, using a pencil and a ruler, lightly make an X by connecting the right top corner to the left bottom corner of your paper and by connecting the top left corner to the bottom right. (finding your center)

Using pencil and ruler, lightly make a rectangle on the X Using pencil and ruler, lightly make a rectangle on the X...be sure to make the vertical lines and horizontal lines of the rectangle parallel to the sides of the paper.

This is where the fun begins. We can now add the interior decor This is where the fun begins! We can now add the interior decor. We can add furniture, windows, another room, etc Remember that all the angles go towards your CENTER POINT. All your other lines should be flat…either horizontal or vertical.

Gallery walk on Friday By the end of this week you should have THREE (3) different 1-Point Perspective drawings completed. * Street * Buildings to Sky * Room You will pick from your three which to show in the Gallery Walk.