About Pompei’s Marine Boat Deck Paint

Slides:



Advertisements
Similar presentations
DECORATIVE SINGLE COAT PLASTER FOR MARBLE CHIPS CLADDING SYSTEM ( PEBBLEDASH )
Advertisements

Delamination Abdullah AL-Mohaimmeed Definition The act of splitting or separating a laminate into layers. The act of splitting or separating a.
Background Surface Treatments
Finishes - Preparation. The term aesthetics is used to describe the outward appearance of a product. Basic preparation is needed before any finish can.
4.04 Wall Coverings.
Processes Used to Finish Wood Materials
Manufacturing. Frame I manufactured large portions of the frame at home as I felt this was easier done at home an I felt the lab times could be better.
CUSHIONED RUBBER SAFETY DECKING. FlexRoc rubberized surfaces are thick, cushioned, safe, non-toxic and incredibly durable rubber safety-decking systems.
GRP Service Riser Systems PULTRUDED STRUCTURAL PROFILE SUPPORTS WITH GRP MOULDED ANTI SLIP GRATING FOR OPEN RISERS AND CUT OUTS FOR SERVICES.
Case 1. To Build a Production Power Boat. A Production Power Boat The boat itself is Length 8 M, Beam 2.5 M, DISP 3200 KG, HP 225 Yamaha Outboard. What.
Materials Revision Metals, Plastics, and Woods This powerpoint runs through materials and their properties, fixing methods (temporary and permanent), and.
PROPER PAINTING TECHNIQUES PREPARATION Prepare your project by sanding it smooth. Paint is repelled by wax, oil, and grease. Clean surfaces if necessary.
Cabot Factory Finish Product Training What are paints and stains made of ? Binders Pigments Additives Resins Solvents.
SYNTHETIC RED OXIDE METAL PRIMER It has good anti-corrosive properties. It contains Zinc-chrome. Recommended for agricultural, steel structures & other.
Example of a successful lining Description: Tuff Stuff is sprayed as a protective lining onto a boat hull. The lining with TS provides a high level of.
ICIS © Copyright , All Right are reserved.
A member of Sayegh Group
Customer presentation, March 2007 Penguard Express Speeding up the production process.
Paint
AUZIE QUIC SLIP PTY LTD AQS METAL PRO – 001 INTERIOR AND EXTERIOR.
A GUIDE TO SELECTING THE RIGHT CONCRETE RELEASE SYSTEM Direct Chemicals Premier Distributor of Release Systems Brisol Construction Products DIRECT CHEMICALS.
Intermediate Course (10) Soldering Karl Davies East Kent Radio Society EKRS 1.
Painting and Coating of Plastics Aleaha Rice Erica Mongera Vince Gallo Penn State Behrend.
Ph Interior House Painting Tips.
Preparing Surfaces and Selecting Paints Preparation Prior to Painting  Start by gathering together all the tools and equipment you will need.
Protactinium 台 灣 拓 鏷 化 工 PD-660.  Oriental Star insulation paints are compounded of polymeric resins and inorganic insulating powders, which features.
BondChem TECHNICAL DATA Roll-a-crete ( Three Component Cementitious Waterproof Coating ) Page 1 / 2. DESCRIPTION BondChem’s Roll-a-crete is a three component.
Aqua-Mite The one and only true water proofing coating designed for permanent under water usage.
INTD 54 paint. components of paint pigments—give color to coating binders—holds the pigments particles together; provide washability/scrubbability & durability.
Kristin Cook. Overview Picking a Color Picking a Paint Type Types of Materials for Different Patterns Preparing the Walls Painting Conclusion Questions.
Wood Finishing Wood Finishing. Finishing Safety When in lab, wear your safety glasses. When in lab, wear your safety glasses. Wear Proper clothing. Wear.
Unit A3-13 Preparing Surfaces and Selecting Paints/Preservatives.
Principles of Manufacturing Copyright © Texas Education Agency, All rights reserved 1.
1 RPM/Belgium N.V. - Version MONOPUR GB MONOPUR ® INDUSTRY The heavy duty polyurethane concrete floor system for extreme service conditions.
Metal Finishing and Painting TSM 233 Unit 16. TSM 233 Metallurgy and Welding Processes Metal Finishing – No Applied Finish  No finish is applied as some.
Acrylic Painting. What Is Acrylic Paint? Water based acrylic paint is composed of pigment particles dispersed in an acrylic polymer emulsion.
COMPACT SHEETING ETERNAL MARBLE. INTRODUCTION  Eternal is a compact heterogeneous vinyl floor covering with a calendared backing in 2m wide sheeting.
HOMOGENEOUS VINYL TILES & SHEETING ELITE PUR. INTRODUCTION  Homogeneous vinyl flooring has a uniform structure and composition from the top to the bottom.
Finishing materials Finishing products made from wood and metals by applying surface coatings- usually the final stage of manufacture but requiring a third.
Key things to think about when designing great centres for assistance dog work Al Peters (Can Do Canines U.S.) things and Richard Lord (Assistance Dogs.
Weber Tile Fixing.
Welcome To Astec Paints Paint With Pride
SHUTTERING AND MOULD OIL RELEASE AGENTS
Applying Paints and Enamels
High Density Polyethylene (HDPE) Panels or Sheets
ETERNAL SAND COMPACT SHEETING.
ETERNAL STONE COMPACT SHEETING.
4.04 Wall Coverings.
FINISHES Finishing is done to improve a materials appearance, properties and quality. It covers many different processes, some mechanical and some chemical.
ETERNAL SMARAGD COMPACT SHEETING.
Tile Shop Sydney.
FLOOR COATINGS TRAINING GUIDE
PaintPaint. Properties and uses Paint Definition The fluid prepared by dissolving a base in vehicle (carrier) Along with coloring pigment is known as.
Electrophoretic application of paint.
Finishes - Preparation. Wood Finishing Products Wood Finishing Products The term aesthetics is used to describe the outward appearance of a product. Basic.
Protective Primer on Metal Surfaces Zinc Dust Paint Grade.
4.04 Wall Coverings.
Sikagard-850 AG anti-graffiti
Building Materials Paints and Distempers.
Industrial painting systems for exterior claddings
Metal Finishes.
INTD 503- Materials Topic: Wall Coverings
ETERNAL PALETTE COMPACT SHEETING.
The Secret Behind a Beautiful and Long-lasting Interior Paint Job
Best Paint Options for a Concrete Around Pool By: Authentic Plastic and Tile
Building Materials Paints and Distempers.
Wall Coverings Paint.
INTD 54 paint.
Awlwash & Awlcare – Maintenance Products
Presentation transcript:

About Pompei’s Marine Boat Deck Paint

Norglass deck paint in store in a range of colors, see under Norglass paints. A unique slip resistant coating incorporating plastic granules to provide a uniform paint film for traction when wet

The profile also facilitates easy cleaning . The profile also facilitates easy cleaning. For use on fibreglass, steel, concrete, timber and aluminium decks.Also, deck paint pearls- make your own deck paint with the paint of your choice.

Decks Bilges Lockers The most suitable and used product for coating deck areas on all boats ia a high-wear paint with a non-gloss finish. This will give durability and minimise reflection from the deck.

Particular tips when painting decks: To prepare a patterned deck, use either a scouring pad or a wire brush for best results.

When adding Anti-slip Pearls to the paint, mix small quantities in at a time until you have the consistency you want. A 160 gm tub of Anti-slip Pearls is sufficient for at least 1.5 litres of paint, depending on the level of anti-slip required – do not use all 160 gm in a 750 ml tin of paint as it will be too much!

For glassfibre decks which have an anti-slip moulding, it may not be necessary to add Anti-slip Pearls to the paint.

Using a roller instead of a brush to apply MultiCoat onto your deck will give a more even coverage of the paint and Anti-slip Pearls.

If you want a higher gloss finish to your decks, Anti-slip Pearls can also be added to Brilliant Enamel and Poly Best.

Whilst a lot of time and effort is spent on the outside appearance and protection of your hull, it is important not to neglect interior areas such as bilges and lockers.

Particular tips when painting bilges & lockers: Ensure adequate ventilation while painting the bilge area!

Brush application is generally easier and quicker, particularly on the uneven surfaces found in these areas. If the bilges are excessively dirty clean first with Degreaser.

MultiCoat MultiCoat is a high opacity semi-gloss topcoat and primer, providing excellent durability with good resistance to water and oil making it ideal for areas such as decks, bilges and lockers. Decks, Bilges & Lockers – onto suitably primed substrate

Contact Pompei’s Marine 0468487602 pompeitrading@bigpond.com 561 Main Street Mordialloc 3195

Al for -mechanical Marine Services for all your boat serving, anchor winch and GME electronic sales 0424315112   Loyalty club Membership 0468487602

More About Pompei’s Marine Boat Deck Paint http://pompeismarine.com/services/boat-deck-paint/

Thank You