Worlding Leading Technology E.MC N series Valve

Clean Air(to be filtered by 40μm filter element) General Specification Fluid Clean Air(to be filtered by 40μm filter element) Acting Air Pilot Port size 1/8",1/4",3/8",1/2" Valve type 5 port 2 position Operation pressure 0.15-0.8Mpa (21-114psi) Guarantee pressure 1.5Mpa (215psi) Operation flow 1000-3700 L/min Temperature -5℃ to 60℃ Body material Anodised aluminium Available voltage 220VAC,110VAC,24VDC Scope of voltage AC:+/-15% DC:+/-10% Power consumption AC:0.7W DC:0.9W Protection class NEMA 4(IP65)

Product Feature 1. Low power consumption—0.9w, but absorbing ability equal to 5 w power coil; 2. Small temperature rising, stable temperature around 10 ℃ 3. Contact protection function, guarantee the reliability of control circuit On/Off 4. Low drive current, short response time, prolong PLC’s life 5. Long lifetime：20mil cycle 6. High frequency, up to 8 hz. 7. Easy replacement, the same installation size with 4v series

Product Comparison Model AirTac 4V-210 E.MC N2M251-08 Photo Power consumption 3w 0.7-0.9w Lifetime 20,000,000 cycle Max frequency 5 cycle/sec 8 cycle/sec Special Function NO PLC Contact Protection： Guarantee the reliability of control circuit On/Off function

High satisfaction from different customers-1 Mustard packaging machine * The headache problem before: air cylinder work more and more slow after hours working. * Reason analysis: air cylinder working in high fequency and caused solenoid valve very hot, so the excitation time become longer. * Solution: use E.MC N2M251-08 working in steady 10℃ even 24 hours.

High satisfaction from different customers-2 Wide-format inkjet printer: *working condition-solenoid valve keep in circular telegram long time once the printer turn on *Problem:solenoid coil up to 80℃ and burned very often. *Solution: Change to use E.MC NM series low power valve totally solve the problem.

PLC Relay Solenoid valves High satisfaction from different customers-3 Normal control system including three parts: PLC+Relay+Valve PLC Relay Solenoid valves

E.MC Low Power Valve Connect With PLC Directly Advantage： Without relay, cost down 2. One PLC can hold more E.MC low power valves. Using Less PLC. One Control System Can Reduce 1 or 2 PLC，10 relays. Saving cost 280—550USD 250—300usd/pcs 3—4USDusd/pcs