PROCESSED GREEN FUEL FOR CLEAN POWER From the process as addressed, high BTU fuel pellets (8,450 to 8,800BTU/lb), presuming an average of approximately 20-22% plastic material in each metric tonne of MSW will be obtained;

PRODUCT CHEMISTRY (AS OBTAINED IN DONGARA, ON, CANADA) Processing to Increase heating value from 1,000 kcal/kg or 4.2 MJ/kg (typical MSW) Constituent Unit Target Result Moisture in Pellet % 4.0 – 6.0 Higher Heating Value Kcal/kg 5,200 – 5,600 Inorganic Ash 5.0 Bulk Density Kg/cu m 656 Chloride (Cl) <0.65 Silver (Ag) µg/g <2.0 Arsenic (As) <3.5 Barium (Ba) <100.0 Beryllium (Be) <0.5 Cadmium (Cd) <1.25 Chromium (Cm) <25.0 Mercury (Hg) <0.75 Nickel (SO4) <15.0 Lead (Pb) Antimony (Sb) <10.0 Selenium (Se) <3.0 Thalium (TI) Vanadium (V) Zinc (Zn) <60.0 9,600 – 10,080 btu/lb OR 22.32 – 23.44 MJ/kg Note: 1 kcal/kg = 1.8 btu/lb 1 MJ/kg = 430 btu/lb The chemistry targets for the pellet are based on known North American parameters, and must be verified to suit the end user of pellets, as well as an understanding of the necessary MSW audits, still to be conducted.