Product Presentation January 2010

Mass flow Guaranteed feed flow Normal Bin ROXELL Bin Old feed Bridging Normal bin: ‘centerflow’ feed flows first in center  bridging ‘mass flow’ feed flows evenly in center + at the sides

Mass flow with Roxell bin Guaranteed feed flow Mass flow with Roxell bin No bolts in feed flow at bottom collar Special smooth surface (MB quality metal sheets) No bolts in feed flow at hopper bottom

Guaranteed feed flow Metal bin Polyester bin DAY NIGHT condensation in heat transfer via bin surface + heat transfer via sunlight Light reflection! Heat transfer: only via bin surface = Green house effect! feed temperature , humidity evaporates, air humidity  NIGHT Inside temperature   condensation!!

Feed temperature 20 cm from the side Guaranteed feed flow outside temperature bin in galvanized sheet polyester bin Temperature inner side Air temperature in bin Feed temperature 20 cm from the side °C °C °C 60 50 40 30 20 10 60 50 40 30 20 10 60 50 40 30 20 10 h h h 06 12 18 24 06 06 12 18 24 06 06 12 18 24 06 source: “Institute of Agricultural Engineering and Pluimveehouderij”

galvanisation + 350 grams/m² (normal: 275 grams/m²) 5 year warranty against corrosion 25 % more galvanisation: galvanisation + 350 grams/m² (normal: 275 grams/m²) Plastified bolts Plastic caps

Approved with German DIN norm plates: 1 mm to 1.50 mm thick double sealing standard 2 windows reinforcement braces braces from legs to center

Identikit Installation time: 3 skilled people: 1 bin per day. (*) Capacity in tons is based on a specific weight of 0,65 kg/dm³. (**) 601-604 Bins with safety cage on the ladder: plus 32 cm. (**) 702-706 Bins with safety cage on the ladder: plus 23 cm. (**) 902-907 Bins with safety cage on the ladder: plus 1 cm. (**) 1052-1056 Bins with safety cage on the ladder: no extra height. Day Bins are not available with ladder, roof ladder, mechanic and pneumatic fill system.

Bins with pneumatic filling FACTS BENEFITS Feed distributor in the inlet. Rubber joint between cover and roof. Plastic exhaust pipes. Optimal aeration during filling. No feed separation. Safety against overpressure. Feed is not compressed. Roxell supplies a special coupling for the inlet pipe, that fits to the hose of the bulk delivery truck.

Bins with auger filling FACTS BENEFITS Cover opens from the ground. Cover opens very wide. Easy to open. The bin can easily and safely be filled with an auger.

Bins with overhead filling FACTS BENEFITS Flex-Auger above bin Fixed or suspended on bin Water proof connections Possibility to avoid truck on the farm Good filling of the bin  Flex-Auger + connection to feed bin is part of the overhead system

Ladders start at the bottom ring. A hinged ladder is available Bins 2.10 m, 2.75 m and 3.20 m have also a roof ladder. Roxell recommends that you ALWAYS install a safety cage on the ladder.

Bin and hopper valve You install this bin valve when you want to empty your bin by hand without Flex-Auger. You install this hopper valve when you want to have the extra possibility of emptying your bin with transport system also by hand. The 1.80 m bin has EXTENDED legs and it is 48 cm higher!.

Entry hatch You install this entry hatch when you want to enter your bin for inspection / cleaning. The entry hatch includes an inner door (which is sealed very tight by the inner pressure from the feed) and an outer door (which makes the entry hatch water proof). The hinge at the bottom of the entry hatch can be used for the hook-in ladder

Bin filling auger ! Cover for motor FA90 – 450 rpm Capacity = 3000 kg/h 740 cm Max 60° Cover 75 cm 120 cm 6 m Hopper 80 kg ! Use steel tubes and elbows for feed for Layers