Performing the Urinalysis Laboratory Procedures

Analyzing the Urine Sample A complete urinalysis usually involves 3 steps. 1. Checking and recording the physical characteristics of the urine 2. Performing a chemical analysis using a multi-test dipstick 3. Centrifuging a small portion of the sample and examining the sediment under a microscope

1. Checking and recording the physical properties of the urine Physical properties include: Color Transparency Odor Specific gravity Volume

2. Chemical Analysis Many chemical tests can be performed on a small quantity of urine by using a dipstick Dipstick is formed when certain chemical reagents have been attached to a piece of plastic. Each pad on dipstick is designed to test for a particular substance in the urine. When the urine comes in contacts with the reagents, a chemical reaction will cause a color change based on the amount of the substance in the urine. Color is compared to chart, and approximate amount of substance in urine can be determined

Several brands of dipstick exist.

Chemical analysis Certain drugs and medications may interfere with chemical tests. Be sure to know any medications animal is currently receiving when performing a urinalysis.

Components on the Dipstick Urine pH Protein Glucose Ketones Bilirubin Urobilinogen Blood Nitrites

Urine pH Number of how acidic or alkaline the urine is pH is affected by diet. Plant diets can cause alkaline urine High protein diets can cause acidic urine Small animal pH is usually acidic In general dog and cat urine pH is 6-7 Large animal urine is usually alkaline Other factors may affect urine pH Fever Starvation Certain drugs

Protein Healthy animals will usually not have any protein in their urine although in some cases trace amounts can be found in concentrated dog and cat urine. The urine protein level must be interpreted along with the Urine specific gravity. Small amounts of protein are more significant in dilute or unconcentrated urine. Protein may be lost in the urine due to glomerulopathies, inflammation, or hemorrhage.

Glucose If the sugar in the blood is significantly higher than normal, some excess may be found in the urine. Normal dog and cat urine should be negative for glucose. In some cases if the urine has sat or is not ran immediately, false glucose readings may occur.

Ketones Ketones are the substances formed in the body during the breakdown of lipids. Normal pet urine should be negative for ketones When excess amounts of ketones are formed, their levels rise in the blood and then are released in the urine. Can cause CNS depression and acidosis May result in ketonuria caused by: Starvation Diabetes

Bilirubin Pigment made by the liver from dead or dying red blood cells. Small amounts may sometimes be found in healthy dogs. Dogs can conjugate bilirubin in their kidneys, so small amount may be insignificant. Bilirubin found in cat urine is a concern and can be a sign of liver disease, bile duct obstruction, or hemolysis.

Urobilinogen Compound formed from bilirubin by intestinal tract. Normal dogs and cats have small amounts of urobilinogen in their urine. Results from dipstick are not considered very accurate in may be difficult to interpret. Usually recorded as “normal” or “abnormal”.

Blood Healthy pets may have a few red blood cells in their urine, but greater than normal amounts may indicate a problem. Hematuria can be due to a number of causes: Trauma Urinary Tract Infection (UTI) Bladder Stones Blood Clotting Problems

Nitrites May be produced by the bacteria present in some infections Test often shows a “false negative” and is considered inaccurate in pets. However, if positive, should examine sediment closely for bacteria.

Examining Urine Sediment After urine sediment is centrifuged (generally about 5 minutes), the top portion of the liquid is poured off and the sediment is resuspended and examined microsopically. Indications for sediment exam include: Provides additional information A form of biopsy/cytology Must be interpreted with other clinical data, including physical and chemical composition of the urine.

Urine Sediment Exam Procedure 1. Collect urine in a clean container 2. Throughly mix specimen and transfer 3-5 ml volume to a centrifuge tube 3. Centrifuge for 3-5 mins 4. Remove supernatant 5. Leave approximately 0.5 ml of supernatant 6. Resuspend urine sediment 7. Examine a stained or unstained sediment.

Potential Sediment Elements White blood cells Bacteria Crystal Casts

White blood cells Larger than normal numbers of white blood cells may indicate inflammation from a bladder or kidney infection. Remember the potential for contamination of WBC’s during sample collection.

Bacteria Sediment is examined for presence of bacteria Small amounts may due to contamination, large amounts may indicate bladder infection (especially if sample is obtained via cystocentesis). A urine culture and sensitivity may indicated with large amounts of bacteria.

Crystals Made up or minerals and can sometimes be found in the urine. Under certain conditions, crystals can clump together to form bladder stones (uroliths). The pH of the urine may influence the type of crystal development Some animals and species are more predisposed to crystal and stone formation.

Common Crystal Types Struvite Calcium Oxalate Ammonium Urate

Casts Urine Casts are small cylinder-shaped formations of cells and debris from inside the tubules of the kidneys Presence of casts and composition can indicate kidney function Types of casts: Hyaline Granular Waxy Fatty Cellular Mixed Bile stained