REPAIRING SMALL DAMAGE ONPANEL (PATCHING) EXECUTING REFORMING OF PANEL IN SMALL DAMAGE BODY OTOMOTIF (F-022) SK – KD 04

TARGET OF LEARNING ACTIVITY Educative participant can know steps forming panel in vehicle body Educative participant can know the way of forming panel in body because small damage Teknologi dan Rekayasa

DEFINITION OF INCISION Incision is hollowing which like rill in surface. Dot where sheet become incision called " point yield". Teknologi dan Rekayasa

REPAIR OF DAMAGE PANEL If the panel will be repaired can dissociated, release the shares and put down on flat area Teknologi dan Rekayasa

REPAIR OF DAMAGE PANEL Eliminating all flammable material including deadener in incised area Teknologi dan Rekayasa

REPAIR OF DAMAGE PANEL Start from wrong tip of metal where the incision became, form “spot hot". Teknologi dan Rekayasa

REPAIR OF DAMAGE PANEL With base, knock the damage part when the metal still hot and immediately cooled with wet mop Teknologi dan Rekayasa

REPAIR OF DAMAGE PANEL Repeat the hot shrinking process as long as incision until all shares return to form initialy Teknologi dan Rekayasa

REPAIR OF DAMAGE PANEL Terminating with final work (metal finishing) Teknologi dan Rekayasa