ABB STOTZ-KONTAKT GmbH ABB i-bus® KNX Room Master, Premium, RM/S 2.1 2CDC 514 051 N0201 | Slide 1

New Innovation Room Master Innovation features Room Scenarios Recall with one group-address All function in the room (e.g. lighting, blind, fan coil, sockets and thermostat) are setting Recall internal (e.g. binary inputs) Recall external (e.g. reception) Device connection internal between in- and outputs without group-address © ABB STOTZ-KONTAKT GmbH 2CDC 514 051 N0201 | Slide 2

Second Step - Overview Room: Commands External commands from the Reception Check In – Room occupied Check Out – Room vacant Standby – Room free for Servicing Device internal commands from the binary inputs Keycard on the entrance Master on the bedside Emergency call in the bathroom Room internal commands (via bus) Sensor inputs switch device outputs Change the operating mode of the Room Thermostat (RT) Integration of further KNX-devices © ABB STOTZ-KONTAKT GmbH 2CDC 514 051 N0201 | Slide 3

Room Scenario Overview Altogether 16 Room Scenario are configurable Room Scenario are grouped in pairs Keycard move Keycard remove Each Room Scenario can be activated on receipt of an externally 1 byte telegram or device internally via a binary input can control up to 7 communication objects these controls can be used to control the Room Master itself, external KNX-device in the room or in the building, e.g. the reception © ABB STOTZ-KONTAKT GmbH 2CDC 514 051 N0201 | Slide 4

Room Scenario (RS) Allocation (Default settings) RS 1 Check In RS 2 Check Out RS 3 Standby RS 4 Emergency Call RS 5 Keycard remove RS 6 Keycard move RS 7 Master OFF RS 8 Master ON RS 9 free RS 10 free RS 11 free RS 12 free RS 13 free RS 14 free RS 15 free RS 16 free All Room Scenario are freely configurable © ABB STOTZ-KONTAKT GmbH 2CDC 514 051 N0201 | Slide 5

Room Scenario Overview: Events A Room Scenario consists of two control events one can be sent immediately other can be sent immediately or with a delay Per control event it can configured whether a KNX Scene is trigged internally or via the bus two 1 bit values are sent the Room Temperature is switched on/off a certain operation mode in the Room Thermostat is set the automatic function for the blinds is activated the internal blocking of the inputs is activated © ABB STOTZ-KONTAKT GmbH 2CDC 514 051 N0201 | Slide 6

Room Scenario KNX Scene On activation of a Room Scenario via a only KNX Scene This has clear advantages: Simple integration of further sensors and actors in the room Clear separation to other rooms by use of one “room-group address” No unnecessary bus load by internal Room Scenario (internal used) Flexible configuration of the functionality © ABB STOTZ-KONTAKT GmbH 2CDC 514 051 N0201 | Slide 7

Room Scenario How does it work? Consumer Commands - internal control - direct connection - via bus Fan Coil KNX Sensor Inputs Room Thermostat Master Reception © ABB STOTZ-KONTAKT GmbH 2CDC 514 051 N0201 | Slide 8

Floor plan Complete Hotel Room (1 ½ Room) TV Content area © ABB STOTZ-KONTAKT GmbH 2CDC 514 051 N0201 | Slide 9

Check In – Room occupied Reception activates Room Scenario 1 floor light and the desk light switch on Room Thermostat change the operating mode to Comfort specified inputs are blocked Commands - internal control - direct connection - via bus TV Content area © ABB STOTZ-KONTAKT GmbH 2CDC 514 051 N0201 | Slide 10

Check Out – Room vacant Reception activates Room scenario 2 lights switch off and bring the blind down Room Thermostat change the operating mode to Standby specified inputs are blocked Commands - internal control - direct connection - via bus TV Content area © ABB STOTZ-KONTAKT GmbH 2CDC 514 051 N0201 | Slide 11

Standby – Room free for Servicing Reception activates Room scenario 3 lights switch off and run the blind up Room Thermostat switch off and change the operating mode to Building protection Commands - internal control - direct connection - via bus TV Content area © ABB STOTZ-KONTAKT GmbH 2CDC 514 051 N0201 | Slide 12

Emergency call operates Emergency call activates Room scenario 4 different lights switch on display Do not disturb switch off message to the reception, remainder unchanged Commands - internal control - direct connection - via bus TV Content area © ABB STOTZ-KONTAKT GmbH 2CDC 514 051 N0201 | Slide 13

Keycard remove Keycard activates room condition 5 floor light switch off with a delay, remainder incl. sockets immediately change Room Thermostat the operating mode to Building protection, blind in automatic, specified inputs are blocked Commands - internal control - direct connection - via bus TV Content area © ABB STOTZ-KONTAKT GmbH 2CDC 514 051 N0201 | Slide 14

Keycard move Keycard activates room condition 6 floor light, desk light and sockets switch on Room Thermostat change the operating mode to Comfort, Display Room occupied on, specified inputs are enable Commands - internal control - direct connection - via bus TV Content area © ABB STOTZ-KONTAKT GmbH 2CDC 514 051 N0201 | Slide 15

Master OFF Master activates Room scenario 7 all lights in the room switch off display Do not disturb switch on and the Room service off remainder remains unchanged Commands - internal control - direct connection - via bus TV Content area © ABB STOTZ-KONTAKT GmbH 2CDC 514 051 N0201 | Slide 16

Master On Master activates Room scenario 8 floor light and desk light switch on remainder remains unchanged Commands - internal control - direct connection - via bus TV Content area © ABB STOTZ-KONTAKT GmbH 2CDC 514 051 N0201 | Slide 17

Fan Coil-Unit Window Contact / Drip Tray connect window contact via group address to the Room Thermostat connect drip tray via group address to the Room Thermostat Commands - internal control - direct connection - via bus © ABB STOTZ-KONTAKT GmbH 2CDC 514 051 N0201 | Slide 18

Summary Room Master New innovation features Room Scenario intern/extern Internal connection between in- and outputs Highly flexible compatible Room Thermostat RDF/A problem free integrated further KNX devices No external auxiliary supply voltage required By the innovation of special default settings the basic features are functional in the room unpack connect finish © ABB STOTZ-KONTAKT GmbH 2CDC 514 051 N0201 | Slide 19

© ABB STOTZ-KONTAKT GmbH 2CDC 514 051 N0201 | Slide 20