Design for Manufacturing Project No. : Viking

Basic Data 基本资料 11.5g 1X1 Zheng P20 ABS 757 2016-12-18 2.0mm 1.005 A Part weight : （产品重量） 11.5g Customer : （客户） Machine Tonnage : （机台吨位） Gate type : （进胶方式） Model : （机种） Mould Number : （模 号） No of cavity : （穴数） 1X1 Designer : （绘图员） Zheng Mould Material ： （模具材料） P20 Material ： （塑胶材料） ABS 757 Submit Date ： （日期） 2016-12-18 Thickness : （产品主胶位） 2.0mm Shrink ： （缩水率） 1.005 Product Size ： （产品尺寸） 61.2x53x18.9 Part Revision ： （产品版本号） A Client comment: It is not necessary to use ABS348 as this part is internal and does not come in contact with Human body. Only requirement is that it should be strong and without warpage, without texture or any surface defects. The surfaces should be perfectly flat. So you can please suggest other materials.

Product Cosmetic Requirement 产品外观要求 Cosmetic SPI-B2 Cosmetic SPI-B3 Client comment: There is no special requirement of color as it is inside part. It can be white. Super: Have you decided the finial color with the part, please share your mind, thanks. 3

Customer comment. (please give your approval and comments) Injection Method 进浇方式 Customer comment. (please give your approval and comments) OK or NG remark Approval by: date ok Manish 17-12-2015 Gate residue 0.1mm Side gate:6X1.2MM

Mould Parting Line 分模线 Note : PL by color Cavity Core SLIDER Client comment: We advise that these features also to be formed by Slider. This is because they are for locating this part in assembly and any mismatch or flash at parting line will affect assembly. Super: please note that this is the most important component of the product. Please let us know the best tolerance level achievable by you for this part. CAVITY CORE 5 Note : PL by color

Mould Parting Line 分模线 Note : PL by color Cavity Core SLIDER Client comment: We advise that these features also to be formed by Slider. This is because they are for locating this part in assembly and any mismatch or flash at parting line will affect assembly. Super: please note that this is the most important component of the product. Please let us know the best tolerance level achievable by you for this part. CAVITY CORE 6 Note : PL by color

Ejection Method 顶出方式 Client comment: Client comment: It is OK to have ejectors on this surface Client comment: It is OK to have ejectors on this surface Client comment: The surface on which ejector marks are appearing is in contact with sensors. So no irregularities allowed. Can this side be made cavity to avoid ejectors on this side? OR do you have any other suggestion to avoid ejectors on these surfaces? Ejector pin recess 0.1MM 7

draft analysis 拔模分析 单位：度 DDPL comment: What is the conclusion? 拔模分析结果是什么？ 8

Wall thickness analysis 产品壁厚分析 单位:mm DDPL comment: What is the conclusion? 9