Autocharging norm № i/o Name of gds Thickness (mm) Density of plate (kg/m3) Size of the sheet Pallets Eurotruck Weight (tare), kg Width Length Number of plates M2 M3 Weight netto, kg Weight brutto, kg Number of pallets 1 MDF 3 880 2800 2070 138 799,85 2,40 2112 2266 9 7198,63 21,60 20394,00 155 2 5 830 88 510,05 2,55 2116 2271 4590,43 22,95 20439,00 6 850 72 417,30 2,50 2128 2283 3755,81 22,53 20543,85 154 4 8 820 54 312,90 2053 2208 2816,86 19867,81 10 780 48 278,21 2,78 2168 2322 2503,87 25,04 20898,00 12 790 40 231,80 2198 2332 2086,56 20988,29 134 7 16 30 173,80 1564,92 18 26 150,70 2,71 2143 2277 1356,26 24,41 20493,77 19 2,86 2262 2396 25,77 21565,22 22 127,50 2,81 2188 1147,61 25,25 20900,65 11 25 760 20 115,90 2,90 2202 2337 1043,28 26,08 21030,02 28 755 104,30 2,92 2205 2340 938,95 26,29 21057,14 13 92,74 2114 2249 834,62 20237,13 14 38 730 81,14 3,08 2248 2382 730,30 27,75 21438,00 04070 Ukraine Str. P.Sagaydachnogo 11 Tel. / Fax: +380 44 220-43-11 www.rezult.pro

Autocharging norm The company has established infrastructure - own railway tracks with access to Railway station. Delivery of production is carried out in any point of Ukraine by railway and by car. Packaging and labeling MDF sheets are packaged in packs (at the bottom of the pack - skid sheet on top - a cardboard sheet), tied with durable plastic tape. Each pack is marked with the label. Driving package 1. The pack is mounted on a backing sheet and wooden sticks on plate format (2800h2070 mm); 2. The top of the stack covered with corrugated cardboard 2800h2070 mm; 3. Packaging contracted four transverse zones of the PET tape (except for 3 mm, where five zones); 4. Package weight maximum of 170 kg. Types of transport Motor vehicles; Boxcars. Recommendations for storage and warehousing of MDF - A well-ventilated warehouses, maintain a relative humidity of 45 to 75% at temperature of +10 to +40 deg C. Topping raw or wet floor with plastic wrap for prevent the entry of moisture into the MDF-plate - Obkladyvat packs below and above the substrate to remove the effects of adverse weather conditions and the environment during transport or long storage - Cover the faces and edges of plates protective coatings to protect the MDF from moisture and heat - To lay the sheets horizontally, with vertical storage of a small number of sheets to comply strict vertical position and stability - To lay the sheets aligned to each other in order to prevent damage to the edges and corners of chipping - Store plates in packs foot height restriction of 4.5 meters with the separation of packs gaskets - Lay on the bottom of a stack of flat podstopnoe place on bars-pad or tray - To lay the pack across the dry bars of uniform thickness (width and thickness of shims should be not less than 80 mm; thickness difference pads used for one pack, should not exceed 5 mm) - To lay the bars at intervals of not more than 600 mm, the distance from the extreme ends of the stack of gaskets should be not more than 200mm (the number of bars must be at least three) for the distance between the thin plates bars can be less - Align the location of spacer bars vertically (gasket separating the stack must located in the same vertical plane one above another strictly). 04070 Ukraine Str. P.Sagaydachnogo 11 Tel. / Fax: +380 44 220-43-11 www.rezult.pro