S.T.B.S COLLEGE OF DIPLOMA ENGINEERING GROUP E 6 Guide By : Mr. RAJESH A. PATEL

GROUP 6 1.Gajera pratik D. (096470309013) 2. Sudani Ravi J. (106470309012) 3. Suvagiya Ravi C. (106470309019) 4. Moradiya Vishal A. (106470309026) 5. Mor Nayan S. (106470309031) 6. Ladava Mayur M. (106470309032)

During “Sodh yatra” we visited many company, which generally manufacture Induction motor, Power transformer,solar system etc. Name of industries given below : Ashok Transformer Pvt. Ltd. Star Engineering Technorise Embetech Pvt. Ltd. Umiya Engineering Surat Transformer Pvt. Ltd. Shree Ram Electrical Pvt. Ltd. Power Trade Pvt. Ltd.

Abstract :In normal we used to control the industrial equipments by manual operation. Hence it is to be updated step by step manually. It is overcome by a new mode of communication which is used to control all those equipments through load sharing mechanism by a single message from anywhere.GSM is the most popular mobile phone system in the world which could be used for this controlling operation from anywhere else

GSM-global system for mobile communication is used a media which is used to control monitor the transformer load from anywhere by sending a message. It has its own deterministic thereby, here GSM is used to monitor and control the DC motor, Stepper motor, temperature sensor and solid state relay by sending a massage through GSM modem. Hence no need to waste time by manual operation and transportation. Hence it considered as highly efficient communication through the mobile which will be useful in industrial controls, automobile, and appliances which would be controlled from anywhere else. It is also highly economic and less expensive; hence GSM is preferred most for this mode of controlling.

Detailed Description: The main aim of this project is transformers sharing whenever the load increased for certain value and also sending these changes information to the respective authority via SMS by using GSM modem. The transformer load sharing will be done by micro controller with the help of electro-magnetic relay. And the load will be monitored on LCD with help of current transformers.

A GSM (global system for mobile communication) modem is connected with the interfacing of the RS 232 (Recommended standard) protocol wireless data transmission. The controlling device of the whole project is a Microcontroller, GSM modem and LCD displays are interfaced to the Microcontroller. The micro controller will supervise all these devices. The controlling device of the project is a Microcontroller to which input and output modules are interfaced. The Microcontroller is programmed using Embedded C language which provides effective environment for performing the task of the project. Express PCB software is extracted to design the circuit boards.  

This project provides us with the learning’s on the following:   Current transformer operation. Interfacing microcontroller with the GSM module. Embedded c program. PCB design. Advantages of this project: we can handle 2 transformers Low power consumption. Long life. Data can be transmitted wirelessly by using GSM module.

The major building blocks of this project are: Regulated power supply. Micro controller. Voltage Transformers. Current transformer. LCD driver circuit. RS-232 interfacing. GSM modem. LCD Display. Electromagnetic Relay. Reset. Crystal oscillator  

“Automatic Transformer Load Sharing With SMS Altering ”

Thank You…