Date of download: 10/26/2017 Copyright © ASME. All rights reserved. From: Mass Fraction Measurements in Controlled Oil-Water Flows Using Noninvasive Ultrasonic Sensors J. Fluids Eng. 2014;136(3):031304-031304-8. doi:10.1115/1.4026055 Figure Legend: Flow loop schematic. Symbols ρ, m, T, and WC stand for measured density, mass flow rate, temperature, and water-cut, respectively, while subscripts W and MO stand for water and mixed oil, respectively. The water line has a single Coriolis meter, while the oil line has a Coriolis meter and a Drexelbrook probe.

Date of download: 10/26/2017 Copyright © ASME. All rights reserved. From: Mass Fraction Measurements in Controlled Oil-Water Flows Using Noninvasive Ultrasonic Sensors J. Fluids Eng. 2014;136(3):031304-031304-8. doi:10.1115/1.4026055 Figure Legend: Oil and water holding tanks and pump layout at the TUFFP flow loop

Date of download: 10/26/2017 Copyright © ASME. All rights reserved. From: Mass Fraction Measurements in Controlled Oil-Water Flows Using Noninvasive Ultrasonic Sensors J. Fluids Eng. 2014;136(3):031304-031304-8. doi:10.1115/1.4026055 Figure Legend: Differences in flow profiles in the absence and presence of a dynamic mixer

Date of download: 10/26/2017 Copyright © ASME. All rights reserved. From: Mass Fraction Measurements in Controlled Oil-Water Flows Using Noninvasive Ultrasonic Sensors J. Fluids Eng. 2014;136(3):031304-031304-8. doi:10.1115/1.4026055 Figure Legend: Sound speeds and densities measured in the single phase crude oil (subscript o) and water (subscript w) samples as a function of temperature

Date of download: 10/26/2017 Copyright © ASME. All rights reserved. From: Mass Fraction Measurements in Controlled Oil-Water Flows Using Noninvasive Ultrasonic Sensors J. Fluids Eng. 2014;136(3):031304-031304-8. doi:10.1115/1.4026055 Figure Legend: Comparison of calculated water-cuts by weight from upstream Coriolis meters (1 – φloopcorr) and LANL meter (1 – φm) in typical test runs

Date of download: 10/26/2017 Copyright © ASME. All rights reserved. From: Mass Fraction Measurements in Controlled Oil-Water Flows Using Noninvasive Ultrasonic Sensors J. Fluids Eng. 2014;136(3):031304-031304-8. doi:10.1115/1.4026055 Figure Legend: Measured fluid temperatures during typical test runs

Date of download: 10/26/2017 Copyright © ASME. All rights reserved. From: Mass Fraction Measurements in Controlled Oil-Water Flows Using Noninvasive Ultrasonic Sensors J. Fluids Eng. 2014;136(3):031304-031304-8. doi:10.1115/1.4026055 Figure Legend: Measurement error due to undertainties in independent variables

Date of download: 10/26/2017 Copyright © ASME. All rights reserved. From: Mass Fraction Measurements in Controlled Oil-Water Flows Using Noninvasive Ultrasonic Sensors J. Fluids Eng. 2014;136(3):031304-031304-8. doi:10.1115/1.4026055 Figure Legend: Distribution of Monte Carlo trial runs for three different water-cut scenarios