GEOMETRY CREATION METHODOLOGIES FOR LHC POINT 4 GEORGIAN TECHNICAL UNIVERSITY GEOMETRY CREATION METHODOLOGIES FOR LHC POINT 4 DAVIT SHEKILADZE Responsible Chair: Mr. Alexander SHARMAZANASHVILI EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH, CERN 03/10/2016

LHC 03/10/2016

Point 4 Location and geometry of Point 4 03/10/2016

The first phase Wrong geometry of Point 4 03/10/2016

Displacement The location of geometry 03/10/2016

Displacement In sketch the circle and the line were far away from each other 03/10/2016

Point Distance The location of geometry 03/10/2016

Point Distance Two points of interlacement were far away on axis X 03/10/2016

Sketch length problem The location of geometry 03/10/2016

Sketch length problem The length of sketch was statutoried in details 10 03/10/2016

Wrong Circle The location of geometry 03/10/2016

Wrong Circle Turning place radius was smaller than opening circle radius 03/10/2016

Pipes And Kleystron 03/10/2016

The Third phase Scan model of Point 4 03/10/2016

Miles We have found unbuilt 11 pipes 03/10/2016 UX45-1401-LEP-05 D114.35114 - 2016   UX45-1401-LEP-06 D114.34893 - 2016 UX45-1401-LEP-01 D114.32830 - 2016  UX45-1401-LEP-07 D150.36178 - 2016  UX45-1401-LAP-02 D114.3720 - 2016 UX45-1401-LAP-08 D114.34100 - 2016 UX45-1401-LAP-03 D114.33040 - 2016  UX45-1401-LEP-09 L25500 - 2016 UX45-1401-LAP-04 D114.32240 - 2016 We have found unbuilt 11 pipes 03/10/2016

Different The error between geometry and scanned models 02/10/2015 Nec’2015, Montenegro

Different between scanned models and pictures UX45-1401-LAP-08 D114.34100- 2016 ø260 ø160 2065mm ø114 34100mm 430mm ø114 3335mm 70mm ø80 320mm 30mm ø230 ø160 Different between scanned models and pictures 03/10/2016

Thank you for your attention 03/10/2016