NMC-A Series Components For Automotive Applications Automotive Grade - Ceramic Capacitors MLCCs NMC-A Series Automotive Grade MLCCs   AEC-Q200 qualified components from TS-16949 certified production site; “QYF” part number suffix Produced and tested on MLCC production lines dedicated to automotive component manufacturing. Quality initiatives include tightened process controls (casting, printing, and dicing) for improved margin control, and higher level test and inspection, to assure high quality components for automotive applications. Ultra-stable NPO and high capacitance X7R temperature coefficients (TCCs) meets AEC-Q200 Grade ‘1’ requirements. Extended voltage ratings, from 10VDC to 630VDC, are ideally suited for use in higher voltage applications, such as ballasts for HID lighting. CASE SIZES: 0402, 0603, 0805, 1206 & 1210 Temperature Coefficient NPO X7R Capacitance Range 0.5pF ~ 0.01uF 100pF ~ 1uF Capacitance Tolerance ±0.05pF (A), ±0.10pF (B) ±0.25pF (C), ±0.5pF (D) & ±5% (J) ±10% (K) ±20% (M) Operating Temp -55°C ~ +125°C TC (ΔC) 0 ±30ppm/°C ±15% Rated Voltages 10V, 16V, 25V, 50V, 100V, 200V, 250V, 500V & 630V Automotive Electronics Applications: Cruise control Display & dash board electronics Entertainment Heating and AC controls HID Lighting ballast In-vehicle Infotainment systems (IVI) Navigation - GPS - Compass Power windows and door locks Proximity sensors Remote keyless entry systems (RKE) Seating controls Telematics Wireless communications Competitor Cross Reference Competitor Series AVX xxxxxCxxxx4xxA (4 = Automotive) EPCOS - TDK CGAxxx_ B, C, D, E, M, KEMET CxxxxC/F/S/X/Yxxxxxx AUTO MURATA GCM, GCJ, GCG, GC3 TAIYO YUDEN EMR, HMK, LMR, TMR, UMR Page 1

NMC-A Series Components For Automotive Applications Automotive Grade - Ceramic Capacitors MLCCs NMC-A Series Automotive Grade MLCCs Packaging Codes: C = 7” paper tape D = 13” paper tape E = 7” embossed plastic tape F = 13” embossed plastic tape NMC-A Series PN: NMC-A __________3QYF 3QY = Automotive production lines at TS-16949 site (Taiwan) and AEC-Q200 qualification Page 2

AUTOMOTIVE GRADE COMPONENTS Components For Automotive Applications AUTOMOTIVE GRADE COMPONENTS Aluminum Electrolytic Capacitors SMT Radial LDD Liquid Construction & Hybrid Construction MLCC Ceramic Capacitors SMT NPO & X7R 0.5pF  1uF 10V  630V 0402  1210 Sizes Thick Film Thin Film Resistors SMT Sulfur Resistant Construction Low Noise, Precision TCR & Tolerances Ferrite Chip Beads SMT EMI Suppression Std & High Current Ratings Molded Case Power Inductors SMT High Current, Vibration Resistant Construction See all Auto Grade Products: www.niccomp.com/auto Page 3