From: Hole-Drilling Residual Stress Profiling With Automated Smoothing Date of download: 10/29/2017 Copyright © ASME. All rights reserved. From: Hole-Drilling Residual Stress Profiling With Automated Smoothing J. Eng. Mater. Technol. 2007;129(3):440-445. doi:10.1115/1.2744416 Figure Legend: Schematic diagram of the bent-beam residual stress specimen

From: Hole-Drilling Residual Stress Profiling With Automated Smoothing Date of download: 10/29/2017 Copyright © ASME. All rights reserved. From: Hole-Drilling Residual Stress Profiling With Automated Smoothing J. Eng. Mater. Technol. 2007;129(3):440-445. doi:10.1115/1.2744416 Figure Legend: Hole-drilling relieved strains versus depth. The data points are measured values. The lines are the backcalculated strains corresponding to the fixed principal direction regularized stresses in Fig. .

From: Hole-Drilling Residual Stress Profiling With Automated Smoothing Date of download: 10/29/2017 Copyright © ASME. All rights reserved. From: Hole-Drilling Residual Stress Profiling With Automated Smoothing J. Eng. Mater. Technol. 2007;129(3):440-445. doi:10.1115/1.2744416 Figure Legend: Computed residual stresses: light (noisy) lines=unregularized results; bold (smooth) lines=regularized results; dashed (straight) lines=theoretical results. The upper three lines show the axial (X) stresses and the lower three lines show the transverse (Y) stresses.

From: Hole-Drilling Residual Stress Profiling With Automated Smoothing Date of download: 10/29/2017 Copyright © ASME. All rights reserved. From: Hole-Drilling Residual Stress Profiling With Automated Smoothing J. Eng. Mater. Technol. 2007;129(3):440-445. doi:10.1115/1.2744416 Figure Legend: Computed principal direction versus depth: light line=unregularized results; bold lines=regularized results

From: Hole-Drilling Residual Stress Profiling With Automated Smoothing Date of download: 10/29/2017 Copyright © ASME. All rights reserved. From: Hole-Drilling Residual Stress Profiling With Automated Smoothing J. Eng. Mater. Technol. 2007;129(3):440-445. doi:10.1115/1.2744416 Figure Legend: rms shear strain misfit qrms versus regularization factor α0 for the bent-beam specimen

From: Hole-Drilling Residual Stress Profiling With Automated Smoothing Date of download: 10/29/2017 Copyright © ASME. All rights reserved. From: Hole-Drilling Residual Stress Profiling With Automated Smoothing J. Eng. Mater. Technol. 2007;129(3):440-445. doi:10.1115/1.2744416 Figure Legend: Strain misfits due to noise removal and to stress profile distortion