EPC3000 Controllers Helping deliver an efficient and secure process Maintain the highest standard of production quality and ease your cybersecurity worries Confidential Property of Schneider Electric

How do I start using my EPC3016, EPC3008, EPC3004? Connect a power supply as described in the Installation and Wiring Sheet, Every EPC3000 is dispatched with a printed copy of the Installation and Wiring Sheet Or you can Download it from the Eurotherm web site http://www.eurotherm.com/products /temperature-controllers Confidential Property of Schneider Electric |

After powering up, use the Quick Code to select your required configuration Quick Codes are described in the Installation and Wiring Sheet. They provide preconfigured functionality. Codes are entered via the front panel. Work out the code you want before starting to enter it. Enter by using the Up and Down keys – press the Scroll Key between characters. At the end it will say EXIT – press the UP key to select SAVE Eg. Set 1 = 1K3xx means PID Heat Only, using a K type thermocouple , ranged 0 – 400 Deg C Set 2 = xPWxx means the user can use the 1st digital input to select between 2 setpoints (P in the 2nd char), and can use the 2nd digital input to Acknowledge Alarms (W in the 3rd character) Quick code entry is only relevant for a device that was ordered unconfigured. Confidential Property of Schneider Electric |

Using the front panel Use the Installation and Wiring sheet for details of the front panel. There are several recordings you can watch to learn more See the next slides for details Confidential Property of Schneider Electric |

Where to find further information In addition to the Installation and Wiring sheet there is a reference manual, and there are many MP4 files and PowerPoints to help you. They are available from the Eurotherm website or via YouTube Select the appropriate one you need. It is recommended that you initially view them in the following order :- How to Use the front panel. How to enter a passcode via the front panel to access protected parameters. How to Acknowledge an Alarm via the front panel. How to Alter Parameters via the front panel eg Tuning Values. How to Select AutoTune via the front panel. How to Reset – to enter a new Quick Code. How to Change the Passcode via the front panel How to Set Up Communications between an EPC3000 and a PC so that iTools can be used These are a mixture of PowerPoints and MP4 files. Continued on next slide. Confidential Property of Schneider Electric |

Further information, Additional “How To …” training demonstrations. How to Use iTools to Create a Backup Clone File, Scan, and Connect to an EPC3000 How to Use iTools to Configure an Alarm in an EPC3000 configuration How to use iTools to determine which hardware modules are fitted How to use iTools to view and edit the PID and Autotune parameters How to use iTools to allow access to parameters via the front panel How To Use iTools to Configure the Passcodes How to Use iTools to Configure a Program eg to Ramp a Temperature Setpoint over a Specific Profile How to Configure a Program via the front panel . Continued from previous slide Confidential Property of Schneider Electric |