How to make a wind car! WARNING! What you will need: 10cm wooden rod 17cm wooden rod 2 big wheels 2 small wheels 4.5cm piece of straw 11.5cm piece of straw 5cm piece of lollipop stick 1 whole lollipop stick 2 jumbo lollipop sticks Lots of tape A balloon 8 pieces of plastic tube 2-5 extra pieces of straw WARNING! Before you start, make sure that you have all the things you need and an adult supervises you whenever you are cutting. 1. First make a triangle out of the jumbo lollipop sticks and the normal lollipop stick. Tape it together securely. 2. Next tape the short lollipop stick to the tip where the jumbo lollipop sticks meet. 3. Now tape the short piece of straw onto the short lollipop stick and the long piece of straw to the long lollipop stick. 4. Then put the 10cm wooden rod through the small straw and push a piece of plastic tube down the rod up to the straw. 5. After that, put the wheels on either end of the rod and secure with another piece of plastic tube.

6. These steps need to be repeated for the large rod and straw at the back of the car. 7. Now you need to take the balloon and put 2 – 5 pieces of straw into the blow hole and wrap tape around it all to make it secure. 8. Finally you need to attach the balloon to the back of the car, making sure it is pointing to the floor. Now you are ready to race your wind car!!!