Chemical Engineering Drawing 16/17 Semester 2 Chemical Engineering Drawing Instructor: Rama Oktavian Email: Oktavian.rama2@gmail.com Office Hr.: M. 10 – 12, T. 10 – 12, W. 09 – 10, F.10 – 15

Outlines 1. Equipment numbering system 2. Equipment lettering system

Equipment numbering system Number each process area, starting with 100, 200, 300 etc. Number major pieces of process equipment in each area, starting from 110, 120, etc. Number supporting pieces of equipment associated with a major process unit, e.g: 111, 112,113, etc. Attach a prefix letter to each equipment number, e.g.: F-110, G-111, etc. Use letter following the equipment number to denote duplicates or spares e.g.: G-111A, B

Equipment lettering system Auxiliary facilities Gas-solids contacting equipment (calciners, dryers, kilns) Crusher, mills, grinders Process vessels (distillation towers, absorption columns, scrubbers, strippers, etc.) Heat exchangers (coolers, condensers, heaters, reboilers, etc.) Storage vessels (tanks, drums, receivers, bins, hoppers, silos) Gas movers (fans, compressors, expanders, ejectors) Separators (bag filters, centrifuges, cyclones, etc.) Conveyors

Equipment lettering system Instruments (control valves, transmitters, indicators, etc.) Pumps Agitators, mixers Motors, drives, turbines P. Package units (refrigeration, air units, etc.) Q. Furnaces, process heaters R. Reactors S. Size-enlargment equipment V. Vaporizers and evaporators X. Miscellaneous

Equipment lettering system Based on Turton et al.

Equipment lettering system Based on Turton et al.

Equipment lettering system Based on Turton et al.

Equipment lettering system Based on Turton et al.

Equipment lettering system Based on Turton et al.

Equipment lettering system Based on Turton et al.

Thank You !