Chapter 5 Geometrical optics January 18, 20 Lenses 5.1 Introductory remarks Image: If a cone of rays emitted from a point source S arrives at a certain point P, then P is called the image of S. Diffraction-limited image: The size of the image for a point source is not zero. The limited size of an optical system causes the blur of the image point due to diffraction: Geometrical optics: When D >>l, diffraction effects can be neglected, and light propagates in a straight line in a homogeneous medium. Physical optics: When D ~l, the wave nature of light must be considered.

5.2 Lenses Lens: A refracting device that causes each diverging wavelet from an object to converge or diverge to form the image of the object. Lens terminology: Convex lens, converging lens, positive lens Concave lens, diverging lens, negative lens Focal points Real image: Rays converge to the image point Virtual image: Rays diverge from the image point Real object: Rays diverge from the object point Virtual object: Rays converge to the object. S P P S P S

5.2.1 Aspherical surfaces Determining the shape of the surface of a lens: The optical path length (OPL) from the source to the output wavefront should be a constant. Example: Collimating a point source (image at infinity) F A(x,y) D d x y ni nt The surface is a hyperboloid when nti>1, and is an ellipsoid when nti<1. Example: Imaging a point source. The surface is a Cartesian oval. Aspherical lens can form a perfect image, but is hard to manufacture. Spherical lens cannot form a perfect image (aberration), but is easy to manufacture.

5.2.2 Refraction at spherical surfaces qi qt j si so li lo C V n1 n2 R 5.2.2 Refraction at spherical surfaces Terminology: vertex, object distance so, image distance si, optical axis. Gaussian (paraxial, first-order) optics: When j is small, cosj ≈1, sinj ≈j,  Paraxial imaging from one spherical surface:

Paraxial imaging from a single spherical surface: Note: 1) This is the grandfather equation of many other equations in geometrical optics. 2) For a planar surface (fish in water): (A bear needs to know this.) 3) Magnification: (Problem 5.6).

Sign convention for lenses (light comes from the left): Example 5.2 fo Fo Object (first) focal length: when si = , Fi fi Image (second) focal length: when so = , Virtual image (si< 0) and virtual object (so< 0): EVERYTHING HAS A SIGN! Sign convention for lenses (light comes from the left): so, fo + left of vertex si, fi + right of vertex xo + left of Fo xi + right of Fi R + curved toward left yo, yi + above axis si V Fi C so V C Fo

Read: Ch5: 1-2 Homework: Ch5: 1,5,6 Note: In P5.1 the expression should be (so+si-x)2. Due: January 27

January 23, 25 Thin lenses 5.2.3 Thin lenses Thin lens: The lens thickness is negligible compared to object distance and image distance. Thin lens equations: Forming an image with two spherical surfaces: C1 V1 V2 P' P si1 so2 nm d si2 R2 R1 C2 nl S so1 S P' P 1st surface 2nd surface (R1, nm, nl) (R2, nl, nm)

Gaussian lens formula: If the lens is thin enough, d → 0. Assuming nm=1, we have the thin lens equation: Remember them together with the sign convention. Gaussian lens formula: Lens maker’s equation: Question: what if the lens is in water?

Optical center: All rays whose emerging directions are parallel to their incident directions pass through one special common point inside the lens. This point is called the optical center of the lens. Proof: R2 R1 C1 C2 A B O Conversely, rays passing through O refract parallelly. Proof: For a thin lens, rays passing through the optical center are straight rays. Corollary: For a thin lens, with respect to the optical center, the angle subtended by the image equals the angle subtended by the object.

Proof: 1st surface, 2nd surface Focal plane: A plane that contains the focal point and is perpendicular to the optical axis. In paraxial optics, a lens focuses any bundle of parallel rays entering in a narrow cone onto a point on the focal plane. Proof: 1st surface, 2nd surface C C’ Focal plane Focal plane Fi C S P Image plane Image plane: In paraxial optics, the image formed by a lens of a small planar object normal to the optical axis will also be a small plane normal to that axis.

Read: Ch5: 2 Homework: Ch5: 7,10,11,15,21 Due: February 3

Newtonian lens equation: February 27 Ray diagrams Finding an image using ray diagrams: Three key rays in locating an image point: Ray through the optical center: a straight line. Ray parallel to the optical axis: emerging passing through the focal point. Ray passing through the focal point: emerging parallel to the optical axis. yo 1 2 3 Fo Fi S P S' P' O so si f xi yi A B xo Newtonian lens equation: Meanings of the signs: + – so Real object Virtual object si Real image Virtual image f Converging Diverging lens yo Erect object Inverted object yi Erect image Inverted image MT Erect image Inverted image Transverse magnification: Longitudinal magnification: Example 5.3

si2 is a function of (so1, f1, f2, d) Thin lens combinations I. Locating the final image of L1+L2 using ray diagrams: Constructing the image formed by L1 as if there was no L2. Using the image by L1 as an object (may be virtual), locating the final image. The ray through O2 (Ray 4, may be backward) is needed. Fi2 Fo1 si1 so2 d Fi1 Fo2 d<f1, d<f2 O2 O1 4 II. Analytical calculation of the image position: si2 is a function of (so1, f1, f2, d) Total transverse magnification:

Back focal length (b.f.l.): Distance from the last surface to the 2nd focal point of the system. Front focal length (f.f.l.): Distance from the first surface to the 1st focal point of the system. Special cases: 1) d = f1+f2: Both f.f.l. and b.f.l. are infinity. Plane wave in, plane wave out (telescope). 2) d → 0: effective focal length f: 3) N lenses in contact: Example 5.5

Angular magnification: Astronomical telescope − infinite conjugate: (d = f1+f2) Angular magnification: f1 f2 a1 a2

Read: Ch5: 2 Homework: Ch5: 22,32,33,42,43 Due: February 3

January 30 Mirrors and prisms 5.4.1 Planar mirrors |so|=|si|. Sign convention for mirrors: so and si are positive when they lie to the left of the vertex. Image inversion (left hand  right hand). 5.4.3 Spherical mirrors The paraxial region (y<<R): x y

The mirror formula: Example 5.10 S C P F V qi qf A f si so R The mirror formula: Finding an image using ray diagrams: S P V C F 1 2 3 4 Four key rays in finding an image point: Ray through the center of curvature. Ray parallel to the optical axis. Ray through the focal point. Ray pointing to the vertex. Transverse magnification: Example 5.10

Changing the direction of a light beam. 5.5 Prisms Functions of prisms: Dispersion devices. Changing the direction of a light beam. Changing the orientation of an image. 5.5.1 Dispersion prisms Apex angle, angular deviation a qi1 qt1 qi2 qt2 d

Minimum deviation: The minimum deviation ray traverses the prism symmetrically. At minimum deviation, This is an accurate method for measuring the refractive indexes of substances.

Read: Ch5: 3-5 Homework: Ch5: 73,81,82,85,86,88,89 Due: February 10