default configuration setup of DLS

Make sure every component (laser source, motor, digital correlator, detector, temperature controller) is on; the shutter is open. Click on software icon.

3. Accept default configuration

Successful initiation will be notified as follows

Sometime communication failure between PC and devices or miss click results in lost of default setup.

How to manually set up the default configuration 1. Reboot PC; initiate software; setup > option setup; (or hotkey F7)

2.Choose AlV/LSE-5002/3 on port COM1

3. Enter wavelength(633nm), index and visc (depending on the solution)

4. Adjust toluene solvent parameters

Toluene index: 1.4954