From: Additive Manufacturing of Glass Date of download: 11/1/2017 Copyright © ASME. All rights reserved. From: Additive Manufacturing of Glass J. Manuf. Sci. Eng. 2014;136(6):061024-061024-6. doi:10.1115/1.4028531 Figure Legend: Illustration of powder bed SLM setup

From: Additive Manufacturing of Glass Date of download: 11/1/2017 Copyright © ASME. All rights reserved. From: Additive Manufacturing of Glass J. Manuf. Sci. Eng. 2014;136(6):061024-061024-6. doi:10.1115/1.4028531 Figure Legend: Experimental results showing particle diameter as a function of exposure duration and laser power. The image in the inset shows the result for P = 10 W and τ = 1 s.

From: Additive Manufacturing of Glass Date of download: 11/1/2017 Copyright © ASME. All rights reserved. From: Additive Manufacturing of Glass J. Manuf. Sci. Eng. 2014;136(6):061024-061024-6. doi:10.1115/1.4028531 Figure Legend: Particle diameter as a function of exposure duration and laser power from simulation

From: Additive Manufacturing of Glass Date of download: 11/1/2017 Copyright © ASME. All rights reserved. From: Additive Manufacturing of Glass J. Manuf. Sci. Eng. 2014;136(6):061024-061024-6. doi:10.1115/1.4028531 Figure Legend: Shape distribution of tracks: (a) beam size 70 μm; (b) beam size 200 μm; (c) beam size 350 μm; and (d) photographs of different track regimes

From: Additive Manufacturing of Glass Date of download: 11/1/2017 Copyright © ASME. All rights reserved. From: Additive Manufacturing of Glass J. Manuf. Sci. Eng. 2014;136(6):061024-061024-6. doi:10.1115/1.4028531 Figure Legend: Continuous line width distribution. White, gray, and black correspond to a beam sizes of 70 μm, 200 μm, and 350 μm, respectively.

From: Additive Manufacturing of Glass Date of download: 11/1/2017 Copyright © ASME. All rights reserved. From: Additive Manufacturing of Glass J. Manuf. Sci. Eng. 2014;136(6):061024-061024-6. doi:10.1115/1.4028531 Figure Legend: Simulated results of single track scanning showing with inset showing temperature distribution in the powder bed

From: Additive Manufacturing of Glass Date of download: 11/1/2017 Copyright © ASME. All rights reserved. From: Additive Manufacturing of Glass J. Manuf. Sci. Eng. 2014;136(6):061024-061024-6. doi:10.1115/1.4028531 Figure Legend: Wall built using powder bed process (a) 1 mm layer thickness, (b) 0.5 mm layer thickness, and (c) side view of 0.5 mm parts. Photographs are as deposited while insets show a portion of the same parts after cutting and polishing. The arrows indicate the build direction.

From: Additive Manufacturing of Glass Date of download: 11/1/2017 Copyright © ASME. All rights reserved. From: Additive Manufacturing of Glass J. Manuf. Sci. Eng. 2014;136(6):061024-061024-6. doi:10.1115/1.4028531 Figure Legend: (a) Illustration of wire-fed process and photographs of part, (b) as deposited, and (c) after cutting and polishing

From: Additive Manufacturing of Glass Date of download: 11/1/2017 Copyright © ASME. All rights reserved. From: Additive Manufacturing of Glass J. Manuf. Sci. Eng. 2014;136(6):061024-061024-6. doi:10.1115/1.4028531 Figure Legend: Micrographs of polished surfaces (a) powder bed part shown with 1 mm layer thickness and (b) wire fed part