Date of download: 11/2/2017 Copyright © ASME. All rights reserved. From: Design Optimization of a Sorption Integrated Sydney Type Vacuum Tube Collector J. Sol. Energy Eng. 2016;139(2):021007-021007-11. doi:10.1115/1.4034912 Figure Legend: Conceptual layout of the integrated sorption collector. Qdes, Qcond, Qabs, and Qevap refer to the input and output powers of the sorption modules for the two operating phases.
Date of download: 11/2/2017 Copyright © ASME. All rights reserved. From: Design Optimization of a Sorption Integrated Sydney Type Vacuum Tube Collector J. Sol. Energy Eng. 2016;139(2):021007-021007-11. doi:10.1115/1.4034912 Figure Legend: Cross section for reactor (left) and C/E (right) heat exchangers and side view of sorption module (below)
Date of download: 11/2/2017 Copyright © ASME. All rights reserved. From: Design Optimization of a Sorption Integrated Sydney Type Vacuum Tube Collector J. Sol. Energy Eng. 2016;139(2):021007-021007-11. doi:10.1115/1.4034912 Figure Legend: Complete assembly of the collector prototype (a) and collector mounted during testing (b)
Date of download: 11/2/2017 Copyright © ASME. All rights reserved. From: Design Optimization of a Sorption Integrated Sydney Type Vacuum Tube Collector J. Sol. Energy Eng. 2016;139(2):021007-021007-11. doi:10.1115/1.4034912 Figure Legend: Test setup at Fraunhofer ISE
Date of download: 11/2/2017 Copyright © ASME. All rights reserved. From: Design Optimization of a Sorption Integrated Sydney Type Vacuum Tube Collector J. Sol. Energy Eng. 2016;139(2):021007-021007-11. doi:10.1115/1.4034912 Figure Legend: Equivalent resistance network for type 827
Date of download: 11/2/2017 Copyright © ASME. All rights reserved. From: Design Optimization of a Sorption Integrated Sydney Type Vacuum Tube Collector J. Sol. Energy Eng. 2016;139(2):021007-021007-11. doi:10.1115/1.4034912 Figure Legend: Operation cycle for a sorption module in a P–T diagram
Date of download: 11/2/2017 Copyright © ASME. All rights reserved. From: Design Optimization of a Sorption Integrated Sydney Type Vacuum Tube Collector J. Sol. Energy Eng. 2016;139(2):021007-021007-11. doi:10.1115/1.4034912 Figure Legend: Simulated annual heating, cooling, and DHW demand (MWh) for a generic hotel in Ankara (a) [21] and layout of system simulation model (b)
Date of download: 11/2/2017 Copyright © ASME. All rights reserved. From: Design Optimization of a Sorption Integrated Sydney Type Vacuum Tube Collector J. Sol. Energy Eng. 2016;139(2):021007-021007-11. doi:10.1115/1.4034912 Figure Legend: Results based on collector aperture area from the efficiency and stagnation measurements at 979 W/m2 plotted both using the mean temperature (b) and the estimated absorber temperature (a), respectively. The stagnation point is reduced 15 K from measured in order to fit all the static measurements.
Date of download: 11/2/2017 Copyright © ASME. All rights reserved. From: Design Optimization of a Sorption Integrated Sydney Type Vacuum Tube Collector J. Sol. Energy Eng. 2016;139(2):021007-021007-11. doi:10.1115/1.4034912 Figure Legend: Model validation based on one of the static measurements. Suffixes S and M refer to simulated and measured, respectively.
Date of download: 11/2/2017 Copyright © ASME. All rights reserved. From: Design Optimization of a Sorption Integrated Sydney Type Vacuum Tube Collector J. Sol. Energy Eng. 2016;139(2):021007-021007-11. doi:10.1115/1.4034912 Figure Legend: Simulation results with 285 m2 collector area from the parametric runs for Ankara. (b) shows the heating and cooling provided per sorption module during heat pump mode (summer).
Date of download: 11/2/2017 Copyright © ASME. All rights reserved. From: Design Optimization of a Sorption Integrated Sydney Type Vacuum Tube Collector J. Sol. Energy Eng. 2016;139(2):021007-021007-11. doi:10.1115/1.4034912 Figure Legend: Cooling power distribution per m2 of aperture area for the five simulation runs
Date of download: 11/2/2017 Copyright © ASME. All rights reserved. From: Design Optimization of a Sorption Integrated Sydney Type Vacuum Tube Collector J. Sol. Energy Eng. 2016;139(2):021007-021007-11. doi:10.1115/1.4034912 Figure Legend: Cooling and heating efficiencies over the year for simulation 5