ELEC 401 MICROWAVE ELECTRONICS Lecture 3 Instructor: M. İrşadi Aksun Acknowledgements: An art work on the illustration of uniform plane wave was taken from http://en.wikipedia.org/wiki/Image:Onde_plane_3d.jpg Animation on the visualization of EM waves was taken from the following web page: http://web.mit.edu/~sdavies/MacData/afs.course.lockers/8/8.901/2007/TuesdayFeb20/graphics/

Outline Chapter 1: Motivation & Introduction Chapter 2: Review of EM Wave Theory Chapter 3: Plane Electromagnetic Waves Chapter 4: Transmission Lines (TL) Chapter 5: Microwave Network Characterization Chapter 6: Smith Chart & Impedance Matching Chapter 7: Passive Microwave Components

Plane Electromagnetic Waves So far, we have only considered waves in the form of planes, that is, the field components of the wave are traveling in the z direction and have no x and y dependence. To visualize such a wave, it would look like a uniform plane of electric and magnetic fields on the x-y plane moving in the z direction, and hence such waves are called uniform plane waves.

Plane Electromagnetic Waves The source of a plane wave is supposed to be uniform over an infinite plane in order to generate uniform fields over a plane parallel to the source plane. There is no actual uniform plane wave in nature. However, if one observes an incoming wave far away from a finite extent source, the constant phase surface of the fields (wavefront) becomes almost spherical. Hence, the wave looks like a uniform plane wave over a small area of a gigantic sphere of wavefront, where the observer is actually located.

Plane Electromagnetic Waves - It is rather easy to visualize the plane waves when the fields and propagation direction coincide with the planes of the Cartesian coordinate system: where E0 and H0 are, in general, complex constant vectors of the electric and magnetic fields, respectively, r is the position vector (or radius vector), and k is a real propagation vector for the lossless medium - Note that the expressions of the uniform plane waves are written based on the physical interpretation of the visualized waves.

Plane Electromagnetic Waves Since these fields have to satisfy Maxwell’s equations, some relations connecting the amplitudes and propagation vectors of such fields may exit. Substitute the mathematical descriptions of the uniform plane waves into Maxwell’s equations. Let us start with Gauss’s law in a source-free, homogeneous and anisotropic medium: Using the vector identity

Plane Electromagnetic Waves Additional relation can be obtained by implementing the Faraday-Maxwell law as follows: Wave number: Intrinsic Impedance: Propagation vector k and the electric and magnetic field vectors E0 and H0 are all orthogonal to each other.

Plane Electromagnetic Waves Propagation vector k and the electric and magnetic field vectors E and H are all orthogonal to each other. E H k

Plane Electromagnetic Waves Example (from “Fundamentals of Applied Electromagnetics” by F. T. Ulaby): An x-polarized electric field of a 1 GHz plane wave travels in the +z-direction in free-space, and has its maximum at (t=0, z=5 cm) with the value of 1.2p (mV/cm). Using these information, find the expressions of Electric and Magnetic field in time-domain. For maximum

Plane Electromagnetic Waves Remember that electric and magnetic fields in a uniform plane wave are related as Substituting the electric field expression results in the following magnetic field expression: Direction of propagation Intrinsic impedance

Plane Electromagnetic Waves - Polarization The polarization of a plane wave is defined as the locus of the tip of the electric field as a function of time at a given space point in the plane perpendicular to the direction of propagation Ex Ey Ex Ey Ex Ey Circular Elliptical Linear

Plane Electromagnetic Waves - Polarization Let us assume a uniform plane wave propagating in z-direction: no z-polarized E or H field ( for uniform plane waves) electric field may have both x- and y-components; - Assume a sinusoidal time variation - Since wave polarization depends on the relative position of Ey with respect to Ex at a constant position in the direction of propagation, it must be independent of the absolute phases of Ex and Ey

Plane Electromagnetic Waves - Polarization The same field is represented in frequency domain (phasor form) as Question: How can we get the locus of the tip of the electric field as a function of time at a fixed propagation distance (z=0 is usually chosen for convenience)? Answer: - write the electric field in time domain - calculate the magnitude of the field - calculate the direction of the field

Plane Electromagnetic Waves - Polarization Linear Polarization: A wave is linearly polarized if both components are in phase, that is q=0. A and B are real constants Step 1: Write the time-domain representation Step 2: Calculate the magnitude of the electric field vector Step 3: Find the direction of the electric field vector

Plane Electromagnetic Waves - Polarization Linear Polarization: A=0; B=1 A=ax; B= -ay

Plane Electromagnetic Waves - Polarization Circular Polarization: A wave is circularly polarized if both components of the electric field have the same magnitude (A=B) with 90-degree phase difference ( ). Step 1: Write the time-domain representation Step 2: Calculate the magnitude of the electric field vector Step 3: Find the direction of the electric field vector

Plane Electromagnetic Waves - Polarization Circular Polarization: A=a; B=a;q= -900 A=a; B=a; q= 900 Left-Hand Circularly Polarized (LHCP) Right-Hand Circularly Polarized (RHCP)

Plane Electromagnetic Waves - Polarization Elliptic Polarization: A wave is elliptically polarized if both components of the electric field have different magnitudes (A B 0) with arbitrary phase difference . Ex Ey Elliptical