[place presentation subject title text here] 1Page 1 doc.: IEEE 802.11-yy/xxxxr0 Month Year John Doe, Some Company Month Year Nov 2013 [place presentation subject title text here] Date: YYYY-MM-DD Authors: 1Slide 1 Hiroshi Mano (ATRD) John Doe, Some Company

Nov 2013 Agenda Introduction of IEEE802.11ai FILS (Fast Initial Link Setup) Overview of IEEE802.11ai Prospected use case Feature of IEEE802.11ai standard Trial report of feasibility study with FILS Current status of IEEE802.11ai Note Overview on IEEE802.11ai principles and mechanisms to enable for Fast Initial Link Set-Up as of Nov 2013. Disclaimer: This document has not been approved by IEEE802.11ai as an official overview document. It has been proposed by the authors based on submissions approved for going into the IEEE802.11ai Draft as well as on documents currently under creating. Hiroshi Mano (ATRD)

Introduction of IEEE802.11ai FILS (Fast Initial Link Setup) 1/3 Nov 2013 Introduction of IEEE802.11ai FILS (Fast Initial Link Setup) 1/3 Scope of IEEE802.11ai Standard: This amendment defines modifications to the IEEE 802.11 Medium Access Control Layer (MAC) to enable a fast initial link set-up of IEEE 802.11 stations (STAs) Purpose of IEEE802.11ai Standard: This amendment defines mechanisms that provide IEEE 802.11 networks with fast initial link set-up methods which do not degrade the security currently offered by Robust Security Network Association (RSNA) already defined in IEEE 802.11. Definition of “Initial Link Setup“ The initial link setup includes all operations required for IP data exchange: Discovery of the network and the BSS Authentication and association signaling IP address configuration Hiroshi Mano (ATRD)

Introduction of IEEE802.11ai FILS (Fast Initial Link Setup) 2/3 Nov 2013 Introduction of IEEE802.11ai FILS (Fast Initial Link Setup) 2/3 Need for the IEEE802.11ai The number of mobile devices incorporating IEEE 802.11 is steadily growing. Applications that are continuously running on those devices benefit from the high data rates of the IEEE 802.11 interface.   The project’s primary need comes from an environment where mobile users are constantly entering and leaving the coverage area of an existing extended service set (ESS). Every time the mobile device enters an ESS, the mobile device has to do an initial link set-up to establish wireless local area network (LAN) connectivity. This requires efficient mechanisms that (a) scale with a high number of users simultaneously entering an ESS (b) minimize the time spent within the initial link set-up phase (c) securely provide initial authentication. The current IEEE 802.11 specification does not meet these requirements in some usage scenarios. An optimization of the link set-up is desirable. Optimizations may include improvements to access point / network discovery, secure authentication, mechanisms to support concurrency in the exchange of higher layer protocol messages during the authentication phase (for example assignment of IP addresses). Hiroshi Mano (ATRD)

Limitation of market growth in the existing Wi-Fi 2018/7/6 Nov 2013 Motivation Limitation of market growth in the existing Wi-Fi Wi-Fi evolved greatly for the past ten years and got big success in a market Data rate : 11/2Mbps →11b/11Mbps→11g/54Mbps →11n/300Mbps→11AC/Gbps Securities : WEP->WPA->WPA2 Service device Desktop PC →　Note Book →　PDA → Portable game, Digital Camera →　Smart phone. However We are still in nomadic services. Hiroshi Mano (ATRD) Hiroshi Mano, ROOT Inc.

Mobile STA do not need stop while in use. 2018/7/6 Nov 2013 Nomadic Vs Mobile Mobile STA do not need stop while in use. Nomadic STA must be stationary while in use. Reference :RECOMMENDATION ITU-R F.1399-1 “Vocabulary of terms for wireless access”　MWA & NWA Hiroshi Mano (ATRD) Hiroshi Mano, ROOT Inc.

Today’s market back ground Nov 2013 Today’s market back ground Growth of portable device Number of portable device which incorporate Wi-Fi is more than PC’s Low power consumption device realized the use of the always-on connection type service. New application’s request (Twitter, Face book…) Push Notification Service Quick update Only cell phone provide these service High bandwidth Very SMALL CELL of each AP True mobile usage Users frequently pass through (isolated) hot spots while on the move The dwell time of a user within a cell is short Isolated hot spots cause frequent initial association / authentication Hiroshi Mano (ATRD)

Prospect of use case 1 Quick update contents and push service. Nov 2013 Prospect of use case 1 Quick update contents and push service. New messages and location data are updated while just passing an AP‘s coverage. So you do not have to stop many times like serious landing operation. Service provider can distribute the handbill without stopping the foot of the customer. Location Pop E-mail Twitter New location and presence Updated new twitters and messages Get new handbills Location Messages Handbill No need stop! Just pass through! Hiroshi Mano (ATRD) Hiroshi Mano, Root, Inc.

Digital Signage + Info Stand Distribute information 2018/7/6 Nov 2013 Prospect of use case 2 RF Tag application Automatic Electrical Cash Register Security Gate Digital Signage　+ Info Stand Distribute information ID Exchange No need stop! Just pass through! Hiroshi Mano (ATRD) Hiroshi Mano, Root, Inc. Hiroshi Mano, Root, Inc. Hiroshi Mano, ROOT Inc.

Nov 2013 Prospect of use case 3 Automatic metering Power electric Water meter Gas meter etc.. Drive through Digital Signage V2V,V2X Hiroshi Mano (ATRD)

Hot spot environment issue 1/2 Nov 2013 Hot spot environment issue 1/2 Environments Busy areas: The famous ”Tokyo Metro Station” measurements Increased amount of spectrum & number of networks & number of devices Signaling overhead Unnecessary information exchange QoS violation Offloading, WLAN use is increasing It is equally important to shorten the link setup time as it is to shorten the data transmission time Shorter scanning reduces power consumption of the device Hiroshi Mano (ATRD)

Hot spot environment issue 2/2 Nov 2013 Hot spot environment issue 2/2 Most of air time is occupied by control frame Especially undesired probe response frames is overflowing. Frame type profile at metro station KDDI’s report Understanding current situation of public Wi-Fi usage. 13/11-13-0523-02 hew-understanding- current-situation- of-public-wifi- usage.pptx Breakdown of Management frames Hiroshi Mano (ATRD)

Feature of IEEE802.11ai (Scan) Nov 2013 Feature of IEEE802.11ai (Scan) More control to scanning procedures: Terminating the ongoing scan More reporting options of the scanning result Immediate reporting Reporting after a channel is scanned Legacy, reporting after scanning is completed Announcing one or more neighbor BSS or channel information in Beacon, Probe Response and FILS Discovery frame (FD) Avoids scanning of channels with no AP BSSID enables more precise active scanning Additional parameters may be included to provide more information of the neighbor BSSs Hiroshi Mano (ATRD)

Active scanning, expedited scanning procedure doc.: IEEE 802.11-yy/xxxxr0 Month Year Nov 2013 Active scanning, expedited scanning procedure If device has received a probe request, it should avoid transmitting the same probe request as transmitted STA 1 Probe Request STA 2 Delay probe request transmission AP1 AP2 AP3 STA 1 Probe Response STA 2 Abort probe request transmission AP1 AP2 AP3 Hiroshi Mano (ATRD) John Doe, Some Company

Active scanning, Probe Response collision avoidance doc.: IEEE 802.11-yy/xxxxr0 Month Year Nov 2013 Active scanning, Probe Response collision avoidance The APs avoids sending unnecessary copies of probe responses Single copy of probe response or beacon frame is enough STA 1 Probe Request STA 2 STA2 misses the probe request transmission AP1 AP2 AP3 STA 1 Probe Request STA 2 AP1 AP2 AP3 STA 1 Probe Response STA 2 Receive probe responses AP1 AP2 AP3 Hiroshi Mano (ATRD) John Doe, Some Company

Active scanning, comprehensive response doc.: IEEE 802.11-yy/xxxxr0 Month Year Nov 2013 Active scanning, comprehensive response One probe response may contain information of multiple APs The total amount of responses is reduced STA 1 Probe Request Chn 1 Chn 6 Request for information of other BSSs AP1 AP2 AP3 Probe Response + Neighbor List Contains information of itself (AP 2), as well as AP 1 and AP 3 or channel 6 Hiroshi Mano (ATRD) John Doe, Some Company

Active scanning, new response criteria doc.: IEEE 802.11-yy/xxxxr0 Month Year Nov 2013 Active scanning, new response criteria Probe Request contains criteria to transmit Probe Response. Response is transmitted only if the criteria is met Criteria include: Transmission power AP transmission Delay Vendor specific information Data delivery rate to Internet AP capabilities STA 1 Probe Request Criteria for AP delay performance & RSSI AP1 AP2 AP3 STA 1 Probe Response Probe response is transmitted if all the criteria are met AP1 AP2 AP3 Hiroshi Mano (ATRD) John Doe, Some Company

Active scanning, Probe Response Reception Time element Nov 2013 Active scanning, Probe Response Reception Time element The transmitters of the Probe Request may indicate how long the transmitter will be available to receive Probe Responses Probe Response Reception Time is set to MAX_Probe_Response_Time Hiroshi Mano (ATRD)

Passive Scanning, key enhancements Nov 2013 Passive Scanning, key enhancements FILS Discovery (FD) frame: a new public action frame small-size: 30-byte MAC framing + 10 to about 25 bytes FD frame body, i.e., 40 to 55 bytes for typical uses; One Mandatory information item: SSID; Optional information items: AP’s Next TBTT, AP-CCC, Access Network Options, Capability, Security, Neighbor AP information. transmitted between beacon frame transmissions, for a fast AP/Network discovery; Transmitted as non-HT duplicate PPDU, when using a larger channel than 20MHz; Example #1 Beacon FD frame Primary channel of the transmitter T1 Preamble Payload/FD Frame time Preamble Payload/FD Frame Example #2 Preamble Payload/FD Frame T2 time Preamble Payload/FD Frame Example #3 T3 time Hiroshi Mano (ATRD)

Reducing sizes of the responses Nov 2013 Reducing sizes of the responses AP Configuration Change Count (CCC) keeps count of changes of the parameters in Probe Response and Beacon One octet in length Changes of BSS Load, Average Access Delay and other rapidly changing parameters are not considered in CCC Hiroshi Mano (ATRD)

Network Discovery, key enhancements Nov 2013 Network Discovery, key enhancements GAS query enhancement by using an AP white-list A new IE with one or multiple 6-byte BSSIDs in GAS request to indicate the AP(s) that the requesting STA wants to query. GAS traffic reduction by using GAS Configuration Sequence Number A new IE with an 1-byte unsigned integer: indicating the version number of AP’s GAS configuration information set; monotonically incrementing whenever there is any change in the AP’s GAS configuration information set; Used in Beacon and/or Probe Response. Hiroshi Mano (ATRD)

Feature of IEEE802.11ai (Higher layer setup) Nov 2013 Feature of IEEE802.11ai (Higher layer setup) Reduce the number of packet exchanges during initial link setup. All of necessary information are exchanged in 2 to 3 round trip of packet exchanges. Note: IEEE802.11ai achieves to have an established IP-Link after the set-up (ready to use for higher layer protocols / applications) This is a major difference from what we have today (IP-setup follows afterwards) and saves lots of time. Hiroshi Mano (ATRD)

Feature of IEEE802.11ai (Higher layer setup) Nov 2013 Feature of IEEE802.11ai (Higher layer setup) Hiroshi Mano (ATRD)

Trial report of feasibility study with FILS Nov 2013 Trial report of feasibility study with FILS The effect of reducing packet exchange was evaluated by field test in Japan. The details are reported in IEEE802.11 as, https://mentor.ieee.org/802.11/dcn/13/11-13-0323-02-00ai-tgai-experimental-test-report-of-fils.pptx FILS STAs completed the association process in significantly less time than WPA STAs.  More time within the coverage area of an AP to use for (user) data exchange The large number of frame exchanges for WPA2 STAs (as compared to FILS STAs) made them vulnerable for fading when entering the AP‘s coverage If retransmission of a lost frame did not succeed after three attempts, the association process had to restart from the beginning This field trial did only consider the higher layer set-up features while using legacy scanning. We expect FURTHER performance increase if the stations implemented the new scanning features. Hiroshi Mano (ATRD)

Trial report of feasibility study with FILS 2/2 Nov 2013 Trial report of feasibility study with FILS 2/2 20 FILS and 20 WPA2 are entering the service area continuously. Measured the distance of STA and AP where STA establish link successfully and received http contents. Measured the time from Association/FILS request to IP address assignment propriety application. http://www.youtube.com/watch?v=xOKaVOPWXTU 90% (18/20) FILS STA established link before arriving at in the front of AP. 85% (17/20) WPA2 established link since they passed in the front of AP. Average link established time between FILS request to IP address assignment is 0.742Sec. Average link established time between Association request to IP address assignment is 21.599Sec Established Link Point FILS 非接続 歩きながら移動 非接続 Service Area WPA2 Hiroshi Mano (ATRD)

Feasibility study of automobile application Nov 2013 Feasibility study of automobile application Fast initial link setup enables opportunistic vehicle to vehicle communication. Toyota InfoTechnology Center measured the number of user text message exchanges during specific time period. Assumption Air coverage: 50m Vehicle speed: 40km/h（11m/Sec） Available communication time : 5Sec WPA2: More than 4Sec communication time is required to exchange messages. FILS: it is available to exchange messages under short communication time. Y: Number of exchanged messages X: Communication time This measurement did only consider the higher layer set- up features while using legacy scanning. We expect FURTHER performance increase if the stations implemented the new scanning features. Hiroshi Mano (ATRD)