Date of download: 11/6/2017 Copyright © ASME. All rights reserved. From: Effect of Roll Configuration on the Leveling Effectiveness of Tail-Up Bent Plate Using Finite-Element Analysis J. Manuf. Sci. Eng. 2016;138(7):071004-071004-7. doi:10.1115/1.4032392 Figure Legend: Asymmetrical factors of tail-up bending occurrence in rolling

Date of download: 11/6/2017 Copyright © ASME. All rights reserved. From: Effect of Roll Configuration on the Leveling Effectiveness of Tail-Up Bent Plate Using Finite-Element Analysis J. Manuf. Sci. Eng. 2016;138(7):071004-071004-7. doi:10.1115/1.4032392 Figure Legend: Layout of plate rolling and leveling

Date of download: 11/6/2017 Copyright © ASME. All rights reserved. From: Effect of Roll Configuration on the Leveling Effectiveness of Tail-Up Bent Plate Using Finite-Element Analysis J. Manuf. Sci. Eng. 2016;138(7):071004-071004-7. doi:10.1115/1.4032392 Figure Legend: Concept of plate leveling with a roller leveler

Date of download: 11/6/2017 Copyright © ASME. All rights reserved. From: Effect of Roll Configuration on the Leveling Effectiveness of Tail-Up Bent Plate Using Finite-Element Analysis J. Manuf. Sci. Eng. 2016;138(7):071004-071004-7. doi:10.1115/1.4032392 Figure Legend: Concept of roll gap: (a) δ < 0, (b) δ = 0, and (c) δ > 0

Date of download: 11/6/2017 Copyright © ASME. All rights reserved. From: Effect of Roll Configuration on the Leveling Effectiveness of Tail-Up Bent Plate Using Finite-Element Analysis J. Manuf. Sci. Eng. 2016;138(7):071004-071004-7. doi:10.1115/1.4032392 Figure Legend: Two roll configurations with 11 work rolls: (a) case 1 and (b) case 2

Date of download: 11/6/2017 Copyright © ASME. All rights reserved. From: Effect of Roll Configuration on the Leveling Effectiveness of Tail-Up Bent Plate Using Finite-Element Analysis J. Manuf. Sci. Eng. 2016;138(7):071004-071004-7. doi:10.1115/1.4032392 Figure Legend: Two-dimensional finite-element analysis model

Date of download: 11/6/2017 Copyright © ASME. All rights reserved. From: Effect of Roll Configuration on the Leveling Effectiveness of Tail-Up Bent Plate Using Finite-Element Analysis J. Manuf. Sci. Eng. 2016;138(7):071004-071004-7. doi:10.1115/1.4032392 Figure Legend: Configuration of mesh: (a) contact with upper punch and (b) contact with work roll

Date of download: 11/6/2017 Copyright © ASME. All rights reserved. From: Effect of Roll Configuration on the Leveling Effectiveness of Tail-Up Bent Plate Using Finite-Element Analysis J. Manuf. Sci. Eng. 2016;138(7):071004-071004-7. doi:10.1115/1.4032392 Figure Legend: Schematic diagram of leveling experiment with roller leveler and up-bending device

Date of download: 11/6/2017 Copyright © ASME. All rights reserved. From: Effect of Roll Configuration on the Leveling Effectiveness of Tail-Up Bent Plate Using Finite-Element Analysis J. Manuf. Sci. Eng. 2016;138(7):071004-071004-7. doi:10.1115/1.4032392 Figure Legend: Up-bending of plate by using an upper punch

Date of download: 11/6/2017 Copyright © ASME. All rights reserved. From: Effect of Roll Configuration on the Leveling Effectiveness of Tail-Up Bent Plate Using Finite-Element Analysis J. Manuf. Sci. Eng. 2016;138(7):071004-071004-7. doi:10.1115/1.4032392 Figure Legend: Simulation results of roller leveling for case 1: (a) upper punch moves down and plate tail is deformed and (b) plate tail contacts the first work roll

Date of download: 11/6/2017 Copyright © ASME. All rights reserved. From: Effect of Roll Configuration on the Leveling Effectiveness of Tail-Up Bent Plate Using Finite-Element Analysis J. Manuf. Sci. Eng. 2016;138(7):071004-071004-7. doi:10.1115/1.4032392 Figure Legend: Vertical displacement of the flat-plate simulation results for up-bending plate without plastic deformation and up-bent plate with plastic deformation: (a) vertical displacement before leveling and (b) vertical displacement after leveling

Date of download: 11/6/2017 Copyright © ASME. All rights reserved. From: Effect of Roll Configuration on the Leveling Effectiveness of Tail-Up Bent Plate Using Finite-Element Analysis J. Manuf. Sci. Eng. 2016;138(7):071004-071004-7. doi:10.1115/1.4032392 Figure Legend: Results of vertical displacement after leveling simulation: (a) entry roll gap = 11 mm and (b) entry roll gap = 10 mm

Date of download: 11/6/2017 Copyright © ASME. All rights reserved. From: Effect of Roll Configuration on the Leveling Effectiveness of Tail-Up Bent Plate Using Finite-Element Analysis J. Manuf. Sci. Eng. 2016;138(7):071004-071004-7. doi:10.1115/1.4032392 Figure Legend: (a) Tail-up bent plate and (b) roller leveling experiment

Date of download: 11/6/2017 Copyright © ASME. All rights reserved. From: Effect of Roll Configuration on the Leveling Effectiveness of Tail-Up Bent Plate Using Finite-Element Analysis J. Manuf. Sci. Eng. 2016;138(7):071004-071004-7. doi:10.1115/1.4032392 Figure Legend: Comparison of simulated results with experimental results for entry roll gap of 11 mm: (a) case 1 and (b) case 2