Specification & Description Hybrid Power Solutions for Commercial Application Application: Office building, manufactory, school, hotel, Resort, amusement park etc. System features: Low investment compare to large wind farm or PV power station. Fast construction, easy delivery and maintenance. Vast application, low requirement for installation environment. Wind turbine and PV panel could be roof-mounted and save the space resource. Green energy, save carbon, bring economic and social effect Flexible system configuration to achieve optimal ROI. Full protection of power system enable the high reliability. System diagram : Referenced system configuration: Item Model Qty Specification & Description 1 Wind turbine nheowind 3D100 3 sets Rated output 4500W per turbine, 35dB@12m/s 2 Wind inverter WPI3500-B 3 pcs Grid-tied, single phase, MPPT, 4.2KW output, IP65 3 Tower of turbine 4.5m height, roof-mounted, galvanized steel 4 PV panels PLM-P195M-54 1178 pcs 195W monocrystalline silicon solar modules 5 PV inverter SPI250K-A 1 unit Grid-tied, three phase, MPPT, 250KW output 6 Confluence box 5 units IP65, equip with lightening-protection module, RS485 7 DC distribution cabinet 8 AC distribution cabinet 9 Accessories 1 set bracket,cable,fastening,etc Installation Environment Information Annual average wind speed is 7m/s, average peak sunshine time is 5 hours per day. Daily average power generation (kWh) (Wind) 900W*24*3*0.9 + (PV) 195W*1178*5H*0.95 ≈1150kWh Conclusion Above system is installed on the rooftop of one commercial building, it would support the power demand of one medium scale manufacturer plant,and the surplus renewable power will be feed-in to the grid net as profit income. www.nheolis.com.cn / www.nheolis.com info@nheolis.com.cn