Date of download: 11/7/2017 Copyright © ASME. All rights reserved. From: Filter Cake Properties of Water-Based Drilling Fluids Under Static and Dynamic Conditions Using Computed Tomography Scan J. Energy Resour. Technol. 2013;135(4):042201-042201-9. doi:10.1115/1.4023483 Figure Legend: Experimental setups

Date of download: 11/7/2017 Copyright © ASME. All rights reserved. From: Filter Cake Properties of Water-Based Drilling Fluids Under Static and Dynamic Conditions Using Computed Tomography Scan J. Energy Resour. Technol. 2013;135(4):042201-042201-9. doi:10.1115/1.4023483 Figure Legend: Cumulative filtrate volume as a function of square root of time under static conditions at 225 °F and 300 psi differential pressure

Date of download: 11/7/2017 Copyright © ASME. All rights reserved. From: Filter Cake Properties of Water-Based Drilling Fluids Under Static and Dynamic Conditions Using Computed Tomography Scan J. Energy Resour. Technol. 2013;135(4):042201-042201-9. doi:10.1115/1.4023483 Figure Legend: Cumulative filtrate volume as a function of time under dynamic conditions at 225 °F, 300 psi differential pressure, and rotational speed of 200 rpm

Date of download: 11/7/2017 Copyright © ASME. All rights reserved. From: Filter Cake Properties of Water-Based Drilling Fluids Under Static and Dynamic Conditions Using Computed Tomography Scan J. Energy Resour. Technol. 2013;135(4):042201-042201-9. doi:10.1115/1.4023483 Figure Legend: The CT scan for the filter cake after 5, 15, 25, and 30 min under static conditions at 225 °F using 10 μm ceramic disk and 69 pcf water-based drilling fluid. Continuous increase in the thickness of both layers after 5 min.

Date of download: 11/7/2017 Copyright © ASME. All rights reserved. From: Filter Cake Properties of Water-Based Drilling Fluids Under Static and Dynamic Conditions Using Computed Tomography Scan J. Energy Resour. Technol. 2013;135(4):042201-042201-9. doi:10.1115/1.4023483 Figure Legend: Change in the average porosity of the layer closer to rock surface and the layer closer to drilling fluid under static conditions at 225 °F and 300 psi differential pressure

Date of download: 11/7/2017 Copyright © ASME. All rights reserved. From: Filter Cake Properties of Water-Based Drilling Fluids Under Static and Dynamic Conditions Using Computed Tomography Scan J. Energy Resour. Technol. 2013;135(4):042201-042201-9. doi:10.1115/1.4023483 Figure Legend: The CT scan for the filter cake after 5, 15, 25, and 30 min under dynamic conditions

Date of download: 11/7/2017 Copyright © ASME. All rights reserved. From: Filter Cake Properties of Water-Based Drilling Fluids Under Static and Dynamic Conditions Using Computed Tomography Scan J. Energy Resour. Technol. 2013;135(4):042201-042201-9. doi:10.1115/1.4023483 Figure Legend: Change in the average porosity of the layer closer to rock surface and the layer closer to drilling fluid under dynamic conditions at 225 °F, 300 psi differential pressure, and rotational speed of 200 rpm

Date of download: 11/7/2017 Copyright © ASME. All rights reserved. From: Filter Cake Properties of Water-Based Drilling Fluids Under Static and Dynamic Conditions Using Computed Tomography Scan J. Energy Resour. Technol. 2013;135(4):042201-042201-9. doi:10.1115/1.4023483 Figure Legend: Change in the thickness of the layer closer to drilling fluid, the layer closer to rock surface, and total thickness with time under static conditions at 225 °F and 300 psi differential pressure

Date of download: 11/7/2017 Copyright © ASME. All rights reserved. From: Filter Cake Properties of Water-Based Drilling Fluids Under Static and Dynamic Conditions Using Computed Tomography Scan J. Energy Resour. Technol. 2013;135(4):042201-042201-9. doi:10.1115/1.4023483 Figure Legend: Change in the thickness of the layer closer to drilling fluid, the layer closer to rock surface, and total thickness with time under dynamic conditions at 225 °F, 300 psi differential pressure, and rotational speed of 200 rpm

Date of download: 11/7/2017 Copyright © ASME. All rights reserved. From: Filter Cake Properties of Water-Based Drilling Fluids Under Static and Dynamic Conditions Using Computed Tomography Scan J. Energy Resour. Technol. 2013;135(4):042201-042201-9. doi:10.1115/1.4023483 Figure Legend: The reduction of the filtrate flow rate with time during 30 min of filtration

Date of download: 11/7/2017 Copyright © ASME. All rights reserved. From: Filter Cake Properties of Water-Based Drilling Fluids Under Static and Dynamic Conditions Using Computed Tomography Scan J. Energy Resour. Technol. 2013;135(4):042201-042201-9. doi:10.1115/1.4023483 Figure Legend: Average permeability of the filter cake obtained by applying Li et al. method [23] under static and dynamic conditions

Date of download: 11/7/2017 Copyright © ASME. All rights reserved. From: Filter Cake Properties of Water-Based Drilling Fluids Under Static and Dynamic Conditions Using Computed Tomography Scan J. Energy Resour. Technol. 2013;135(4):042201-042201-9. doi:10.1115/1.4023483 Figure Legend: Pressure drop across the layer closer to rock surface and the layer closer to drilling fluid under static conditions at 225 °F and 300 psi differential pressure

Date of download: 11/7/2017 Copyright © ASME. All rights reserved. From: Filter Cake Properties of Water-Based Drilling Fluids Under Static and Dynamic Conditions Using Computed Tomography Scan J. Energy Resour. Technol. 2013;135(4):042201-042201-9. doi:10.1115/1.4023483 Figure Legend: The permeability of the layer closer to rock surface and the layer closer to drilling fluid under static conditions at 225 °F and 300 psi differential pressure

Date of download: 11/7/2017 Copyright © ASME. All rights reserved. From: Filter Cake Properties of Water-Based Drilling Fluids Under Static and Dynamic Conditions Using Computed Tomography Scan J. Energy Resour. Technol. 2013;135(4):042201-042201-9. doi:10.1115/1.4023483 Figure Legend: Pressure drop across the layer closer to rock surface and the layer closer to drilling fluid under dynamic conditions at 225 °F, 300 psi differential pressure, and rotational speed of 200 rpm

Date of download: 11/7/2017 Copyright © ASME. All rights reserved. From: Filter Cake Properties of Water-Based Drilling Fluids Under Static and Dynamic Conditions Using Computed Tomography Scan J. Energy Resour. Technol. 2013;135(4):042201-042201-9. doi:10.1115/1.4023483 Figure Legend: The permeability of the layer closer to rock surface and the layer closer to drilling fluid under dynamic conditions at 225 °F, 300 psi differential pressure, and rotational speed of 200 rpm